* Hyundai: Car Port for Tucson Hybrid 2022
* Update RELEASES.md
* Init gear_msg at the top
* FW versions from script
* Button send attempt
* start with some cleanup
* Send button fixed bits
* Define all bytes and only send PAUSE/RESUME
* Use CRUISE_INFO to cancel cruise and resume
* 8-bit counter
* Cleanup ish
* 8 bit counter
* Send at 20ms
* Disengage bits
* Revert bump submodules
* Allow tx on 0x1a0
* Fix byte counts
* Send LFA and HDA icons based on engageability
* Send cruise buttons only on HDA2 cars for now
* Add comments
* Add FLAG_HYUNDAI_CANFD_HDA2 flag
* Update interface.py
* Update carstate.py
* Update carstate.py
* Update carstate.py
* Bump submodules
* Bump panda
* Bump opendbc
* Allow tx with CRUISE_INACTIVE
* GEAR has 24 bytes only
* Generate car docs
* Fix CRUISE_INFO copy
* Remove unused class
* Add CAN-FD busses to unit test
* Bump opendbc
* Revert "Add CAN-FD busses to unit test"
This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48.
* Remove duplicate
* New tune based on data
* Panda safety cleanup
* Include bus 0 in rx checks
* Missed one
* bus 6 check
* Remove redundant check
* Add comments
* Bump opendbc
* Sync with DBC
* Hide LFA icon when disengaged
* Little endian
* fix comment
* more conditions in carcontroller
* update pedal signal
* update tuning
* cleanup carcontroller
* bump panda
* fix mismatch
* alt buttons
* little more cleanup
* update refs for EV6 new safety param
* bump panda
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Silverado support
Co-authored-by: Jason Shuler <jshuler@gmail.com>
* Update docs
* Try 2 m/s/s
* Should be good torque values
* Add Silverado test route
* Add to releases
* Send counter
* can't send multiple or it faults
* Send at 33hz, no counter
* try 25hz, don't line up exactly with car's buttons
* never tried 10hz with same counter
* Update selfdrive/car/gm/gmcan.py
* Make same as pcmCruise branch
* update year and package (different packages needed per-trim)
* Update year in releases
* Revert to 21
* We can use this package name again
* wrong one!
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Switch to ECMPRDNL2 for GM gear
* Removing manumatic gear #
* values.py almost complete
* Silverado and Bolt EUV val and CP
* GM controller updated
* Cam hrns supp done (in theory)
* cleanup for new cars
* Remove extra constant
* WS, etc cleanup
* removing the unused
* Fix kpBP typo
* Updated docs
* Skip's PIF tune
* Dropped LKA CAN error patch
* Add silverado sigmoid ff
* CAN Err & LKA latch patch
* Remove EPS fault fix (another PR)
* Remove Silverado (another PR)
* clean up some common params
* Remove Escalade FP
Remove Escalade FP
* comment
* Premier is just a trim
Premier is just a trim
Premier is just a trim
* no footnote: new Bolt is like most other cars, older GM were outliers not at the camera
* clean up
clean up
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* remove comments
* try spamming buttons on bus 2
* bump panda
* bumping opendbc w btn rc
* not needed for this port
This reverts commit 6af1f0ba799e075f877d7acc8ca0f117d97da361.
* add button safety
* Send next rc when spamming btns
* forward other signals in message
* missing DriveModeButton
* fill cruiseState.speed
* see if resume works without counter
* try the whole message
* send immediately and at 10Hz
* no resume, back to just button signal
* even holding random buttons it cancels
* Use torque controller with base tune
* stock long GM don't auto-resume yet
* Testing GM zero min steer speed
* Revert latcontrol
* revert opendbc
* latActive is basically lkas_enabled
* Update Bolt torque params
* comment
* clean up
* Add to releases
* Add test route
* Don't specify segment
* bump panda
* bump panda
* no harness for Bolt just yet
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* We support all and 2023
* move safetyParam up to first cam check
* Bump panda and update docs
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Rebase and merge upstream
* Bump panda
* bump panda
* todo comments, minor clean up
* Add test route
* send CLU11 on bus 2
* Update docs
* Use Chrysler cp ternary naming convention
* Add FW version
* Update with latest test route
* Use segment with engaging/disengaging and moving
* sort FW
* push ci route
* add comment
* bump panda
* bump panda
* clean up
* Limit torque
* bump panda
* bump panda
* bump panda
* Add missing FW
* Add CAN fingerprint (need to fix spotty queries)
* missing fingerprints
* bump panda
* use O
* It's 2022, how is SCC still not standard!
* space
* bump panda to master
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* RamInit
* bump submodules
* lil cleanup
* clean up carstate formatting and platform grouping
make tuple
* give it a gold torque star (looks around 2.4 from rough data)
* Dasm Fault
* bump panda
* more cleanup
* cleanup car state
* more cleanup
* some fixes
* remove more stuff
* fix angle signal scaling and fix lkas control bit
* bump panda
* update those
* same limits as pacifica
* cleanup hud alert building
* better fault logic
* fix rate
* set ahb
* bring that back
* update refs
Co-authored-by: Jonathan <jraycec@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Comma Device <device@comma.ai>
* master 2022 Civic
* bump panda
* bump
* bump cereal
* fix
* needed
* try for now
* maybe
* revert for now
* move to Cam parser
* fix
* move to cam
* need AEB_STATUS too
* bump for debug prints
* bump opendbc and add cruise_params
* bump opendbc and update cruise_params
* bump
* test route
* update ref
* Revert "update ref"
This reverts commit 28345dab63d1919865ccb510265222a4cd4252f4.
* cleanup
* just to test
* bump
* revert
* need to send val 12 too?
* change bus
* not needed
* update bus
* syntax
* move this to other bus too
* Revert "move this to other bus too"
This reverts commit 770bf4745ee244c8426ac108f44b67777198d0a7.
* test new lane line signal
* needed too
* maybe need both?
* Test new LKAS hud message
* bump
* missing comma
* missing
* maybe
* add frame and idx
* add in hud_lanes
* switch this too
* bump panda
* add this
* I guess need this too
* to match
* also
* wasnt correct
* bump opendbc
* bump panda
* move to cam parser
* missing
* add here too
* bump
* remove from cam parser
* bump
* back to cam parser
* its 5hz
* bump for new checksum function
* bump for correct frequency
* update frame and idx
* bump
* bump and update
* send set me bit
* bump
* pass these values through
* silly atom
* ret
* fix this
* use copy instead
* add these too
* to check keyerror
* switch
* bump submodules
* send too
* proper
* Replace HUD with BOH
* add dashed lanes
* small fix
* clean up
* not needed anymore
* remove and change
* this too
* dont always set
* remove additional LKAS message
* bump
* add
* to test
* add frame
* bump
* rebase
* remove default values
* rename
* clean up some carstate logic
* regenerate docs
* spacing
* simplify more logic
* bump opendbc
* bump opendbc
* only if radarless
* panda at least builds now
* add comment
* bump
* fixes
* bump opendbc
* bump opendbc
fix for new DBC
* bump opendbc
* bump opendbc
* carstate: fix bus, parser signals
* Set safety param
* pt bus is 0, not 1
* Fix SCM_BUTTONS and bump panda and opendbc
* fixes for ACC_CONTROL
* bump opendbc
* bump opendbc
* convert from MPH on HONDA_BOSCH_RADARLESS
move is_metric
* make sure we don't disable if radarless
* don't show incorrect harness on website
don't show incorrect harness on website
* bump panda
* remove/update comments
* bump panda
* Fix harnesses
* one line check
* bump opendbc
* remove this
* Some carstate cleanup
We removed STANDSTILL->WHEELS_MOVING
we don't use CRUISE_PARAMS
add back
add back
* more cleanup
* update docs
* marketing says it has TJA and ACC with low speed follow
* send buttons on bus 0
bump panda
* comment
* camera needs to see buttons on bus 2
comment
* bump panda
* add to releases
* remove comments
* comment
* we don't use stock hud yet
Co-authored-by: vanillagorillaa <ntmccoy@yahoo.com>
Co-authored-by: vanillagorillaa <31773928+vanillagorillaa@users.noreply.github.com>
Co-authored-by: kevinharbin <76784413+kevinharbin@users.noreply.github.com>
* add support for 2021 Hyundai Tucson
base configuration and fingerprints
* fix fcw again and don't use mando radar for tucson
* last fixes for working tucson
* Apply suggestions from code review
* add to cars
* increase steerRatio
* missing car info
* one platform
* rename
* add min enable speed
* update releases
Co-authored-by: bluesforte <harry3b9@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* support for ICE 2022 RAV4
* add to releases
* swap
* add fingerprints from a5c341bb250ca2f0
* update test route
* update docs
* add test for rav4
* values.py is a comma file
* add ndog to releases
* aligns with latActive
* note to split it up and describe what it does
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* add panda flag for toyota stock long with camera
* clean up
* Add 2022 RAV4 Hybrid from Philly
* fix wrong fw in interface, did this ever work?
* Must be a hybrid
* no radar parsing
* fix can error
* move to own platform
* generate docs
* fix
* Add 2022 Rav4 XSE Australia fingerprint parameters (#24303)
* Update values.py
Add 2022 Rav4 XSE Australia
* add commas
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* bump panda
* wait, the camera doesn't even send 0x343, right?
* use a set instead, more obvious
* don't test without a parser
* bump panda
* flip panda flag
* bump panda
* add commas
* regen and update refs
* set to none by default
* revert parenthesis
* update comment
* bump panda
* regen and update refs
* add test models and update readme
* bump to master
Co-authored-by: BrettLynch123 <34538435+BrettLynch123@users.noreply.github.com>
