* Fingerprint for Kona EV 2021
update fingerprint to show support for Kona EV 2021 also the Kona EV 2021 uses the G harness ( the same as the 2019)
616f048bf31258b7|2022-04-23--20-38-39
616f048bf31258b7|2022-04-23--20-38-39--4
remove improper youtube link that show a Hyundai Elantra driving listed next to a Kona hybrid
* Update values.py
* Update values.py
fixed an open parentheses that could cause some issues added SCC+LFA requirement note on Kona EV
* Update CARS.md
add Kona EV 2021 to supported cars
* regenerate
* remove that
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* tici downclock
* fix that
* gp ref
* lower that a bit
* that was a scam
* perf
* update power
* increase that
Co-authored-by: Comma Device <device@comma.ai>
* Do not run model when skipping frames
* also prepare wide
* add logging
* remove newline
* small skip test
* more random
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* squash #24009
* Fix from other pr
Add low-quality arg
* Update tools/sim/test/test_carla_integration.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Updates for comments. Not finished yet
* commit
* fix arguments
* Final changes for comments
* Final fixes
* increase carla client timeout to 10
* make test executable
* actually wait for controlsd to send messages
* Error proof test. Starting up carla at each test and closing down using docker (tried many things).
* commit test carla
* Removed some time.sleeps
Add some more retries for bridge.
* Stop while loop on shutdown
* Increase teardown waiting time
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* manager: cleanup ensure_running
* make notcar a blocking condition
* invert last conditions
* duplicate
* always run daemon process
* comment
* typo
* make notcar like driverview
* seperate writer from encoder
* video writer in release
* confirm loggerd on PC works, add YUV option to compressed_vipc
* make raw_logger use video_writer
* put this back to master
* close codec
* put this back
* use unique_ptr
Co-authored-by: Comma Device <device@comma.ai>
* Add c3 camera flag to bridge.py
* Set c3_cameras to default
* add runtime error message
* Remove c2 arg
* Update to 163 fov to not see through car
* update comment
* Update tools/sim/bridge.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Revert camera.py changes
* Remove focal_length
* cleanup
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Add carla pip dependency for dev
* Revert other packages in pipfile
* Remove redundant carla install in docker
* Fix CI
Remove broken openpilot_build
* New run command
* check standstill against panda
* use XMISSION_SPEED for all, and compare to 0
* fix
* only check for Honda for now
* update comment
* update refs
* update refs and update check
* phantom commit
* Initial commit
* Fix bugs
* Need more torque rate
* Cleanup cray cray control
* Write nicely
* Chiiil
* Not relevant for cray cray control
* Do some logging
* Seems like it has more torque than I thought
* Bit more feedforward
* Tune change
* Retune
* Retune
* Little more chill
* Add coroll
* Add corolla
* Give craycray a good name
* Update to proper logging
* D to the PI
* Should be in radians
* Add d
* Start oscillations
* Add D term
* Only change torque rate limits for new tune
* Add d logging
* Should be enough
* Wrong sign in D
* Downtune a little
* Needed to prevent faults
* Add lqr rav4 to tune
* Try derivative again
* Data based retune
* Data based retune
* add friction compensation
* Doesnt need too much P with friction comp
* remove lqr
* Remove kd
* Fix tests
* fix tests
* Too much error
* Get roll induced error under 1cm/deg
* Too much jitter
* Do roll comp
* Add ki
* Final update
* Update refs
* Cleanup latcontrol_torque a little more
