* HKG: Car Port for Kia Sorento Plug-in Hybrid 2022
* Add torque params
* Typo
* This car has SCC on bus 4, needs radar disable to use openpilot longitudinal :/
* Need to check on bus 4 as well
* Different unit signal
* Unit signal cleanup
* Add test route
* Regenerate car docs
* Different logic
* 2023 should be the same
* Fix 0x1a0 check race condition
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* increase lag on prius
* better offline values computation
* split prius ecu more, set deadzone to 0
* add deadzone back
* replace deadzone with slack
* reduce deadzone to 0.2
* update refs
* HKG: Car Port for 2022 Kia Stinger
* Substitute KIA STINGER GT2 2018 torque params
* bump panda
* Add test route
* Update CARS.md
* Not this checksum
* Update test route
* Update CARS.md
* Harness C -> Harness K
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* HKG: Car Port for Genesis GV70 2023 thanks to @zunichky!
Co-authored-by: kyle zunich <zunichky@msu.edu>
* Update docs
* Update selfdrive/car/hyundai/values.py
* GV70 does radar SCC, separate them
* One more
* bump panda
* Gate 0x1A0 away from bus 6
* Can't leave out the OG
* EV6 non-HDA2 too?
* bump panda
* bump panda
* Check 0x1a0 based on param
* bump panda
* bump panda
* bit simpler
* fix bit op
* fixes
* bump panda to master
* cmt
* flip
Co-authored-by: kyle zunich <zunichky@msu.edu>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Hyundai: Car Port for Santa Cruz 2022
* bump opendbc
* New struct and params for CAN-FD ICE models
* fixup! New struct and params for CAN-FD ICE models
* bump panda
* bump panda
* HKG: Car Port for Sportage 2023
* fixup! HKG: Car Port for Sportage 2023
* Kia Sportage 2023: Add FW versions
* Longitudinal Control: ICE CAN-FD models
* fixup! Longitudinal Control: ICE CAN-FD models
* bump panda
* fixup! Longitudinal Control: ICE CAN-FD models
* Update car info
* fixup! Longitudinal Control: ICE CAN-FD models
* Gate radar disable behind HDA2 only
* Gate radar disable behind camera SCC cars
* Update CARS.md
* Add FW versions for Santa Cruz 2021
* Test route for Kia Sportage 2023 (openpilot longitudinal enabled)
* Test route for Santa Cruz 2021 (openpilot longitudinal enabled)
* fixup! Kia Sportage 2023: Add FW versions
* HKG: Car Port for Genesis GV70 2023 thanks to @zunichky!
Co-authored-by: kyle zunich <zunichky@msu.edu>
* Update car info
* Add torque param for GENESIS GV70 1ST GEN
* Fix CARS.md
* Update test route
* Remove unnecessary HDA2 checks
* Add additional FW versions for Sportage 2023
* Fix Kia Sportage supported MY
* Fix MISRA violation
* Fix release note
* Use IntFlag to gate camera SCC for CAN-FD
* Parse 0x1A0 on bus 4 dynamically
* bump panda
* Car code cleanup
* Typo
* Add additional 0x1A0 signals to bus 4
* Fix weird bitwise logic
* Check 0x1a0 after safety config is set
* Revert "Check 0x1a0 after safety config is set"
This reverts commit 141bbf79792bcde9cfadbc0680654acf61d8d16f.
* Check car list instead
* Add GV70 2022 test route
* Add fwdRadar FW version for GV70 2022
* Fix CARS.md
* Fix CARS.md
* Fix CARS.md
* new santa cruz route
* bump panda to commaai/panda#1031
* bumppanda
* some clean up
* lets refactor CAMERA_SCC_CAR in another pr
* minor clean up
* update docs!
* GV70 is a radar-SCC car :( (another PR)
* fix removed sportage hybrid versions
* update docs
Co-authored-by: kyle zunich <zunichky@msu.edu>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: sshane <shane@smiskol.com>
* HKG: Add FW for 2019 Elantra GT i30
* Add test route
* remove can fp
* revert that
* actually shares the same platform with the ceed
* marketed as Elantra i30
* stash
* Revert "stash"
This reverts commit 03b164c9dbad53ff22a961d7a93848b8c91d1722.
* add car infos
* gen docs
* combine with elantra
* legacy again
* update docs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Add missing fw versions for 2019 Optima
* move versions to new platform
* add temp fw version notes
temp notes
* clean up
* Update docs
* add fw versions from the last 180 days
* add tests
* fix
* remove FPv1 for Optima
* seems like the 2016 is the same
* revert
* add versions from our 2019 Optima
* label/move some versions
* add some versions from a 2020! (3d96bd05b5513638)
* this is from the same 2017 as earlier
(4f930156368f7830)
* vin lookup isn't perfect
* Revert "vin lookup isn't perfect"
This reverts commit 62c563bc4549b37160254d45bb90fcbc1f6cd589.
* a 2020 (df71aec6e636d7e4)
* cleanup, this transmission is also a 2020 version
df71aec6e636d7e4|2021-10-07--17-59-28
* this comes with scc
* one line
* revert
* bump panda
* add our transmission FW
* Add test route
* Chevy Bolt EV w ACC Port
* dashcam
* The website allows you to select the package without ACC
* fix Bolt E(U)V centerToFront
* Update selfdrive/car/gm/values.py
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Chevy Equinox Port
* LKAS is not standard on 2019, but it's the same package as ACC. (LKAS standard 2020+)
* 2019 here too
* clean up
* add to untested
* not in docs
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* add model years
* update Focus steer ratio
* Ford: add EU label to Focus Mk4
* add packages
* add Ford Explorer 2020
Package: Co-Pilot 360 Assist+
Optional on XLT
Standard on Limited, Limited Hybrid, ST and Platinum
https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf
* Ford: steering control with path angle
* Ford: add TJA toggle to buttons
* add Ford Explorer 2021
`62241b0c7fea4589|2022-08-30--11-58-24--0`
Package: Co-Pilot 360 Assist+
Optional on XLT
Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020)
https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf
* Ford: add shiftByWire ECU fw
* angle/steer refactor
* try always stop and go for US models
* no dashcam
* car info
* send resume button
* skip explorer
* escape and focus back in dashcam
* passthru buttons
* fordcan set bus for button message
* toggle off stock traffic jam assist so camera does not enforce driver presence checks
* not used
* update ramp rate/precision notes
* cleanup
* bump steering pressed torque to 0.8 Nm
* add standstill
* bump steer ratio
* try increasing delay?
* fix docs
* add kuga car info
* maybe fix tja toggle?
* compensate for ford roll compensation??
* oops
* better ui
* block non-adaptive
* add note on ui warning for hands on wheel
* try only checking/toggling TJA every 2 seconds
* add car test route
* dashcam only again
* send buttons to camera
* add process replay segment
* cleanup
* bump panda
* add extra FW
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* Hyundai: Car Port for Tucson Hybrid 2022
* Update RELEASES.md
* Init gear_msg at the top
* FW versions from script
* Button send attempt
* start with some cleanup
* Send button fixed bits
* Define all bytes and only send PAUSE/RESUME
* Use CRUISE_INFO to cancel cruise and resume
* 8-bit counter
* Cleanup ish
* 8 bit counter
* Send at 20ms
* Disengage bits
* Revert bump submodules
* Allow tx on 0x1a0
* Fix byte counts
* Send LFA and HDA icons based on engageability
* Send cruise buttons only on HDA2 cars for now
* Add comments
* Add FLAG_HYUNDAI_CANFD_HDA2 flag
* Update interface.py
* Update carstate.py
* Update carstate.py
* Update carstate.py
* Bump submodules
* Bump panda
* Bump opendbc
* Allow tx with CRUISE_INACTIVE
* GEAR has 24 bytes only
* Generate car docs
* Fix CRUISE_INFO copy
* Remove unused class
* Add CAN-FD busses to unit test
* Bump opendbc
* Revert "Add CAN-FD busses to unit test"
This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48.
* Remove duplicate
* New tune based on data
* Panda safety cleanup
* Include bus 0 in rx checks
* Missed one
* bus 6 check
* Remove redundant check
* Add comments
* Bump opendbc
* Sync with DBC
* Hide LFA icon when disengaged
* Little endian
* fix comment
* more conditions in carcontroller
* update pedal signal
* update tuning
* cleanup carcontroller
* bump panda
* fix mismatch
* alt buttons
* little more cleanup
* update refs for EV6 new safety param
* bump panda
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Silverado support
Co-authored-by: Jason Shuler <jshuler@gmail.com>
* Update docs
* Try 2 m/s/s
* Should be good torque values
* Add Silverado test route
* Add to releases
* Send counter
* can't send multiple or it faults
* Send at 33hz, no counter
* try 25hz, don't line up exactly with car's buttons
* never tried 10hz with same counter
* Update selfdrive/car/gm/gmcan.py
* Make same as pcmCruise branch
* update year and package (different packages needed per-trim)
* Update year in releases
* Revert to 21
* We can use this package name again
* wrong one!
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* VW PQ: Volkswagen Passat NMS
* regen CARS.md
* vEgo from Bremse_1 vehicle speed
* sync opendbc to master
* handle checksums and counters in opendbc
* LDW HUD message handling
* GRA_Neu_Zaehler -> COUNTER
* bump opendbc
* stub in till we find platform ACC standstill
* bump opendbc
* bump opendbc
* placeholder lateral accel data
* regen CARS.md
* counters now directly supported in opendbc
* additional door-open signals
* add trunk lid state
* add doors and trunk lid to signals list
* LDW_Status updates and passthrough
* bump opendbc for typo fix
* update AWV comment
* another comment update
* regen CARS.md with PQ in dashcam only
* don't show NMS footnotes while still in dashcam
* polish
* add stubbed-out dashcamOnly prep
* VW MQB: Cleanup stock ACC button handling
* bump opendbc and panda
* use controls resume output as trigger
* these can wait until taco bell
* bump opendbc
* pass through of previously fixed value
* retry CI
* checks already done in carcontroller
* don't need these anymore
* reduce diff for now
* slightly better abstraction
* more engine and trans FW
* turn signal is instantaneous stalk position
* weak sauce :(
* better clarity
* try torque tune
* add test route references
* bump opendbc and panda for OP long
* don't show steering faults for 3 seconds after start
* longitudinal control senders
* a little more torque
* test hax to torque control
* test a little more delay
* allow use of manufacturer ramp-up rate
* soften wheel-touch threshold
* Revert "test hax to torque control"
This reverts commit d1af459c29e36264aae406f72b8fcbc9ef22b9e0.
* punch it Chewie
* better ACC state and mainswitch handling
* a little more
* tweak max accel gradient
* oops
* also oops
* stuff
* srsly
* that's not how this works
* regen CARS.md
* footnotes now properly excluded for dashcam cars
* this wasn't a problem
* update network location detection
* bump submodules for ACC main switch
* clean up DBC references and long flag
* bump one more time
* one more time
* follow CANPacker counter refactor
* bump opendbc
* sync opendbc to master
* bump panda to fix Subaru tests
* DBC handling cleanup
* fix
* model-year stretch
* cleanup and rate bugfixes
* better abstractions
* simplify create_lka_hud_control
* volkswagencan -> mqbcan
* bump panda
* fix doc data bug, regen CARS.md
* style updates; diff reduction
* use common button enable logic
* not needed anymore
* refactor TSK and HUD enum values
* make common button events function
* consistency
* bump panda
* bump panda
* dashcam only
* don't need process_replay yet
* regen CARS.md with Passat NMS in dashcam
* can't handle dashcam-orphaned footnotes yet
* remove outdated standstill handling
* editor tried to be too helpful at some point
* don't need to import this anymore
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* follow parkingBrake refactor
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Switch to ECMPRDNL2 for GM gear
* Removing manumatic gear #
* values.py almost complete
* Silverado and Bolt EUV val and CP
* GM controller updated
* Cam hrns supp done (in theory)
* cleanup for new cars
* Remove extra constant
* WS, etc cleanup
* removing the unused
* Fix kpBP typo
* Updated docs
* Skip's PIF tune
* Dropped LKA CAN error patch
* Add silverado sigmoid ff
* CAN Err & LKA latch patch
* Remove EPS fault fix (another PR)
* Remove Silverado (another PR)
* clean up some common params
* Remove Escalade FP
Remove Escalade FP
* comment
* Premier is just a trim
Premier is just a trim
Premier is just a trim
* no footnote: new Bolt is like most other cars, older GM were outliers not at the camera
* clean up
clean up
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* remove comments
* try spamming buttons on bus 2
* bump panda
* bumping opendbc w btn rc
* not needed for this port
This reverts commit 6af1f0ba799e075f877d7acc8ca0f117d97da361.
* add button safety
* Send next rc when spamming btns
* forward other signals in message
* missing DriveModeButton
* fill cruiseState.speed
* see if resume works without counter
* try the whole message
* send immediately and at 10Hz
* no resume, back to just button signal
* even holding random buttons it cancels
* Use torque controller with base tune
* stock long GM don't auto-resume yet
* Testing GM zero min steer speed
* Revert latcontrol
* revert opendbc
* latActive is basically lkas_enabled
* Update Bolt torque params
* comment
* clean up
* Add to releases
* Add test route
* Don't specify segment
* bump panda
* bump panda
* no harness for Bolt just yet
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* We support all and 2023
* move safetyParam up to first cam check
* Bump panda and update docs
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Ram HD Init
* Update selfdrive/car/torque_data/override.yaml
* Revert FW for 1500
* little cleanup plus test route
* bump panda
* revert 1500 changes
* bump panda
* same error max
* dashcam + cleanup
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Rebase and merge upstream
* Bump panda
* bump panda
* todo comments, minor clean up
* Add test route
* send CLU11 on bus 2
* Update docs
* Use Chrysler cp ternary naming convention
* Add FW version
* Update with latest test route
* Use segment with engaging/disengaging and moving
* sort FW
* push ci route
* add comment
* bump panda
* bump panda
* clean up
* Limit torque
* bump panda
* bump panda
* bump panda
* Add missing FW
* Add CAN fingerprint (need to fix spotty queries)
* missing fingerprints
* bump panda
* use O
* It's 2022, how is SCC still not standard!
* space
* bump panda to master
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* torque control again
* 3mss per s
* no bad sensors
* tweaks
* Need more checks before we can do this
* update refs
* only ram for now
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* RamInit
* bump submodules
* lil cleanup
* clean up carstate formatting and platform grouping
make tuple
* give it a gold torque star (looks around 2.4 from rough data)
* Dasm Fault
* bump panda
* more cleanup
* cleanup car state
* more cleanup
* some fixes
* remove more stuff
* fix angle signal scaling and fix lkas control bit
* bump panda
* update those
* same limits as pacifica
* cleanup hud alert building
* better fault logic
* fix rate
* set ahb
* bring that back
* update refs
Co-authored-by: Jonathan <jraycec@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Comma Device <device@comma.ai>
