* Added Rogue 2019/Leaf 2019 fingerprints
* Added Rogue as new car. Updated readme
* Added route to test_car_models.py. Fixed if statements to check against rogue/x-trail
* Fixed paste error
* Merged Leaf fingerprints
* Assume Rogue is MPH until we work out the mph/kph bit
commit 012049274fd5573bdc5d2d0f198817646dfd5a1b
Author: Willem Melching <willem.melching@gmail.com>
Date: Sat May 30 10:40:49 2020 -0700
update ref
commit d50cc2d81fd73dcfccfe1a8e2726879941ec5327
Author: Jason Young <jyoung8607@gmail.com>
Date: Sat May 30 10:32:25 2020 -0400
Discard no-longer-used import
commit c092e6f5092535a3b4bb5cabb6f5ecf83ef754c7
Author: Jason Young <jyoung8607@gmail.com>
Date: Sat May 30 10:21:57 2020 -0400
Improved tune from community
* Call to gmtime is potentially dangerous
* Revert "Call to gmtime is potentially dangerous"
This reverts commit cc531e4e1969f7a615230d8462f0be3258ba3378.
* Call to gmtime is potentially dangerous
* oops
* not a pointer
* Little identation fix
* Mazda Port
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update checksum to account for steer angle signal used in some cars
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Add test drive/segment ID to pass CI tests
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Process gear and brake signals, add new fingerprints
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor some car interface code
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop redundant call, use Ecu, move warning to carstate, fix cruise speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop unused variables, cleanup handsoff tracking
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update to steerError and steeringRate
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor parse gear, update lkas signals from the new dbc
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Better tracking of engage and warning events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* remove commented lines, update speed_kph to match panda
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Steer Error
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Set lkas enable speed to 52 kph
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop block signal use, fix LGTM alerts
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* When gas is pressed OP will disengage, sync local state with it
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Use car's speed signal instead of wheel speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Tidy up disengage events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Rebase/Refactor with upstream
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Sync stock ACC state with OP
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* mazda dbc file renamed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Improve acc stock and go by removing the 3 seconds limit
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Dashcam
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* PR Feedback
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Send ACC cancel only if we are sure cruise is enabled
Otherwise we run the risk of disabling main cruise
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* updated route
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* no process replay for now
* add to release files
* Revert "updated route"
This reverts commit 233db4f1bc2d8eefaa86488be4f6f88360d20793.
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Running pre-commit in CI
* fix dockerfile syntax
* dont run on submodule repo folders
* Fix some import errors in ci
* more stuff
* That should be the last one
* "The commit-hook project sounds interesting though. I would definitely merge something that runs flake8 and pylint on the modified files!"
- pd0wm, https://github.com/commaai/openpilot/pull/1575#issuecomment-634974344
* add pylint to pre-commit and make everything pass
* Remove uncommented stuff
Co-authored-by: J <user@4800.lan>
