* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* hyundai: match speed on dash
* still needs conversion to m/s
* always use CF_Clu_VehicleSpeed2
* clean up, like honda
* experiment
* to the source
* works pretty well on optima (matches exactly on Sonata)
* could be 0.5
* clean up test
* revert test_moedls
revert test_moedls
* woops
* woops.
* .
* fix hyst
* only CF_Clu_VehicleSpeed
* omgomgomg
* add all this mess because it always takes a while
* set vEgoCluster
* fix all rounding errors
* stash
* clean up
* clean up
* fix metric conversion
* only calculate when updated
* try to filter (didn't look great from plots)
* Revert "try to filter (didn't look great from plots)"
This reverts commit 7e9876c237341d07163985b0718fd9c553372e72.
* clean up
* update refs
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Change ramp limits to 2/2 for CANFD cars
* Only the high torque CANFD cars
* comment
* Update selfdrive/car/hyundai/values.py
* Better to do 2/3 and for all cars
* bump to master
* update refs
* Honda Bosch: match speed on dash
* present on all cars
* all honda
* more explicit switching
* hyst
* hyst
* clean up
* Update ref_commit
* no bitwise
no bitwise
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* lateral overriding is overriding
* Update test
* remove
* also could do something like this and only have one OVERRIDE ET
* Revert "also could do something like this and only have one OVERRIDE ET"
This reverts commit 5c381641c08961676a56a9718fbdaa84989ac249.
* full names
* bump cereal
* test every event type
* update refs
* single longitudinal toggle for e2e and disable radar
* write disable radar param
* rename
* better param name
* clean that up
* update refs
* update translations
* not live for experimental
* write it out
* vanish
* toyota: match set speed from dash
* Use unit bit
* Use RSA2
* flip this
* Universal unit signal, set vEgoCluster
* remove this and bump opendbc
* detect if car interface sets cluster fields
* revert
* needs to be cp
* UI_SPEED is actually always in kph?
* forgot to actually convert it
* same in onroad
* try conv factor only for imperial
* Seems like UI_SPEED is not the UI speed at all
* the dash might floor it
* same openpilot behavior
* bump
* ego speed factor is dynamic across speeds, handle Lexus exceptions with
diff msg
* remove test, bump opendbc
* secret formula
* secret formula v2
* 1.03 is sufficient
* try short press
* bump opendbc
* surely this can be cleaned up
surely this can be cleaned up
* use filter
* redo factors
* try UI_SPEED again with a factor
try UI_SPEED again with a factor
* dash applies hysteresis to speed. this matches pretty well, but not exactly
* match only set speed
* clean up
* clean up
clean up
* Update ref_commit
* update refs
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Move auto resume in sng to car interface
* Update docs
* shorter name, star
* order
* resumes?
* add hidden detail sentence
* good to know this works, but revert
* VW auto resume
* bump cereal to master
* Update ref_commit
* match cereal
* try this
* ?
?
* like this
* Hyundai: Car Port for Tucson Hybrid 2022
* Update RELEASES.md
* Init gear_msg at the top
* FW versions from script
* Button send attempt
* start with some cleanup
* Send button fixed bits
* Define all bytes and only send PAUSE/RESUME
* Use CRUISE_INFO to cancel cruise and resume
* 8-bit counter
* Cleanup ish
* 8 bit counter
* Send at 20ms
* Disengage bits
* Revert bump submodules
* Allow tx on 0x1a0
* Fix byte counts
* Send LFA and HDA icons based on engageability
* Send cruise buttons only on HDA2 cars for now
* Add comments
* Add FLAG_HYUNDAI_CANFD_HDA2 flag
* Update interface.py
* Update carstate.py
* Update carstate.py
* Update carstate.py
* Bump submodules
* Bump panda
* Bump opendbc
* Allow tx with CRUISE_INACTIVE
* GEAR has 24 bytes only
* Generate car docs
* Fix CRUISE_INFO copy
* Remove unused class
* Add CAN-FD busses to unit test
* Bump opendbc
* Revert "Add CAN-FD busses to unit test"
This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48.
* Remove duplicate
* New tune based on data
* Panda safety cleanup
* Include bus 0 in rx checks
* Missed one
* bus 6 check
* Remove redundant check
* Add comments
* Bump opendbc
* Sync with DBC
* Hide LFA icon when disengaged
* Little endian
* fix comment
* more conditions in carcontroller
* update pedal signal
* update tuning
* cleanup carcontroller
* bump panda
* fix mismatch
* alt buttons
* little more cleanup
* update refs for EV6 new safety param
* bump panda
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* see if this works at all
* can revert this
* think adding a no entry conditionally is nicer
* then we can revert this
* 0 makes more sense
* Revert "0 makes more sense"
This reverts commit efc89e8a2389ef58fbc0cec0a2872d24db524867.
* gm CC uses > 70
* bump cereal
* comment
* test on Honda
* whoops
* works
* add exception with todo
* moved button enable events to controlsd
* get rid of that
get rid of that
* different values for now
* car interfaces add enable event, controlsd can block it
* Regen and update refs
* delete if not set
* One place
one place
* regen routes are uninitialized first few frames
* Trim start of segment so it's like original segment
* stash
* regen
* not working
* clean up
* more cleanup
* revert
* bump ceral
* actually check resume button
* whoops
* pcmCruise cars don't use setSpeed, so we're good
* engage correctly in sim
* Update ref_commit
* Update refs
* push
* do process replay
* commit
* update refs
* clean up
* clean up controlsd
* clean up controlsd
* Add assert
* debubuggier param name
* can be peristent
* Revert "can be peristent"
This reverts commit 6e6d3f6423c26a202623cef728e038259e9e46cd.
* Update selfdrive/test/process_replay/process_replay.py
* First attempt
* worksish
* tests pass
* cleanup
* get rid of garbahe
* fix name
* Still used in xx
* add debug functions
* used
* Revert "used"
This reverts commit 276e8ebab06d2d4f0e9927ba32b7d8aca2bf88c3.
* Update ref
* driverview
* auto choose
* useless
* remove
* modeld not use toggle
* remove from params
* should have commissue anyway
* delete icon file
* deal with init more elegantly and prohibit switching when engaged
* nonblock save when not unstable
* filter very low speeds
* a few more secs dont harm
* draw icon
* match
* radius
* use const
* ref commit
* new transs
* put_bool_nonblocking
* 5k route tune
* ref comm
Co-authored-by: Comma Device <device@comma.ai>
* VW MQB: Cleanup stock ACC button handling
* use controls resume output as trigger
* these can wait until taco bell
* pass through of previously fixed value
* retry CI
* checks already done in carcontroller
* don't need these anymore
* reduce diff for now
* remove parenthesis
* update refs
* fix packer exception
* update refs
Co-authored-by: Shane Smiskol <shane@smiskol.com>
