* indecisive
* rename to generic FW query
* remove code and update comment
* we need this to start off, unless we set multiplexing immediately
* draft
* draft 2
* try that
* can't do this either, boardd might read Enabled after removing, but before setting new Request param
* this should work
* use one less param
* fix params
* match behavior (set all pandas to safety param of 1, disabling multiplexing for fingerprinting
* clean up (some tests may temp break)
* fix param name and sort
* time it
* yes it does matter
* add to hyundai's bus 5 query
* remove hyundai for now
* this should work
* clean up
* clean up
* flip argument around, clean up
* fix test_startup
* some clean up
* rm line
* comment makes more sense
* required typing
* clean up common type
* comments
* Update selfdrive/car/car_helpers.py
* line
* whoops, need to set before vin!
* fix debug
* annoying
* more debugging
* bug fix (needs both keys always)
* debuGG
debuGG
* Revert "debuGG"
This reverts commit 55b2f429324c0b92d5cfb2cabf8b20db1e166248.
* Revert "more debugging"
This reverts commit 02934c3403ad5270f03093508b704c151d1ccb2a.
* Revert "annoying"
This reverts commit 8b4e5e09989f9a0217e3ec1c0ba68735929b7366.
* clean that up
* bumpback
* bumpback
* every second write param
* flip
* stuff
* move up?
* fix timing out in CI
* rm
* add flag
* actually use in fw_versions.py
* simpler
* not here
* Comment
* better name
* add param and block
* keys
keys
* block
* with a value
with a value
* add query for bosch PT bus
* different name
* fix
* .
* fix test
fix test
* add cloulogs
* mark as logging
* show confirmation toggle on first toggle of experimental mode
* don't store confirmation if users toggle off *after* this PR
* refactor
* cleaner
* not true
* try here
* add mypy config matching precommit
* use local mypy, add files to config
* excludes too
* fix config
* pylint is sad now... did it get updated?
* fix typing hints
* ignore
* this should be a regexp
* mypy doesn't like Deque despite inheriting MutableSequence
* more excludes
* Revert "pylint is sad now... did it get updated?"
This reverts commit 250c632f18ecb3d33ffb931e15425f9314a0964b.
* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* good updater experience
* set params on startup
* no fetch on first loop
* little type hinting
* little more
* update translations
* always set params with valid overlay
* wrap check
* use the param
* more wrapping
* vanish
* cleanup
* remove that
* change LSM6DS3TR(-c) gyroscope and accelerometer to interrupt
* add pthread for linking
* add interrupt collector thread to fetch in parallel to non interrupt based sensors
* change get_event interface to return true on successful read
* fetch sensor interrupts via gpiochip
* avoid sending empty messages (interrupt only, non interupt magn can leave a gap in the orphan block)
* add verifier script to sensor interrupts (sensor_data_to_hist.py)
* add/update sensord testsweet (test_sensord.py)
* add poll timed out check
* unexport interrupt gpio pins
* gpiochip on both edges, but skip falling edge if rising edge is detected, this is handled in the sensor as the status flag is checked if new data is availble
* add test to sensord to verify 100Hz interrupt frequency
* add sensor shutdown/low power mode functionality on sensord exit
* relax test, will be readded in the splitup PR
Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com>
* single longitudinal toggle for e2e and disable radar
* write disable radar param
* rename
* better param name
* clean that up
* update refs
* update translations
* not live for experimental
* write it out
* vanish
* compiling, won't work yet
* running with inputs and outputs
* there's some magic chance this works
* no more dlc, include onnx
* yolo tests plz
* bump tinygrad
* files_common + delete dlc
* tinygrad_repo -> tinygrad
* pre commit config
* llops needed
* extra in files_common
* bump tinygrad
* fix indent
* tinygrad/nn/__init__
* tinygrad_repo
* bump tinygrad repo
* bump tinygrad
* bump with native_exp, match maybe
* native_explog is argument
* pyopencl no cache
* 5% chance this matches
* work in float32?
* bump tinygrad
* fix build
* no __init__
* fix recip
* dumb hack
* adding thneed PC support
* fix pc segfault
* pc thneed is working
* to_image
* prints stuff with debug=2
* it sort of works
* copy host ptr is simpler
* bug fix
* build on c3
* this correct?
* reenable float16
* fix private, fixup copy_inputs internal
* bump tinygrad and update ref commit
* fix OPTWG on PC
* maybe fix non determinism
* revert model replay ref commit
* comments, init zeroed out buffers
* upd ref commit
* bump tinygrad to fix initial image
* try this ref
Co-authored-by: Comma Device <device@comma.ai>
* split out pigeond from boardd
* also want to turn off power
* fix manager calls
* move to sensord folder
* release files:
* add assistnow code
* no bare except
* add test script to test TTFF
Co-authored-by: Comma Device <device@comma.ai>
* push
* do process replay
* commit
* update refs
* clean up
* clean up controlsd
* clean up controlsd
* Add assert
* debubuggier param name
* can be peristent
* Revert "can be peristent"
This reverts commit 6e6d3f6423c26a202623cef728e038259e9e46cd.
* Update selfdrive/test/process_replay/process_replay.py
* First attempt
* worksish
* tests pass
* cleanup
* get rid of garbahe
* fix name
* Still used in xx
* add debug functions
* used
* Revert "used"
This reverts commit 276e8ebab06d2d4f0e9927ba32b7d8aca2bf88c3.
* Update ref
* driverview
* auto choose
* useless
* remove
* modeld not use toggle
* remove from params
* should have commissue anyway
* delete icon file
* deal with init more elegantly and prohibit switching when engaged
* nonblock save when not unstable
* filter very low speeds
* a few more secs dont harm
* draw icon
* match
* radius
* use const
* ref commit
* new transs
* put_bool_nonblocking
* 5k route tune
* ref comm
Co-authored-by: Comma Device <device@comma.ai>
* nav: show on left side of onroad ui
* add toggle
* capitalization
* update translations
* single params object
* skip unfinished translations test
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* rough multiple language demo
* more wrappings
* stash
* add some bad translations
* updates
* map from french to spanish still has same problem of needing to call setText on everything
* add files
* restart UI
* use return code
* relative path
* more translations
* don't loop restart
* Toggle and prime translations
* try on device
* try QComboBox with readable style
* stash
* not yet scrollable
* stash
* dynamic translations (doesn't work for dynamic widget strings yet)
* clean up multiple option selector
* store languages in json
* try transparent
* Try transparent popup
* see how this looks
* tweaks
* clean up
* update names
* Add Chinese (Simplified) translations
* Do missing French translations
* unit tests caught that :)
* fix test
* fix other test (on PC)
* add entries to dialog to test
* add cancel button, clean up a bit
* just chinese
* some clean up
* use quotes
* clean up
* Just quit, set timeout to 0
* half a second
* use exitcode
* don't print if it's expected
* this comment is outdated
* update translations
* Update translations
* re-order input classes
* Update line numbers
* use enabled property for button style
* Get rid of ListWidget
* Update line numbers
* Log failed to load language
* Log failed to load language
* Move to utils and fix english logging
extra line
* Update translations
* spacing
* looks a bit better
* try this instead of exitcode
fixes
fix
* only one function
* comment
* Update line numbers
* fixup some japanese translations
* clean up multi option dialog
* Update line numbers
