* remove local caching
* remove local caching
* reduce camerad power
* break stupid imx390 black level support
* handle edges
* now 13ms, vignetting is 'slightly' less correct
* halfs->floats and inlines, down to 12.9ms
* oops, fix float
* val from 12 is ushort
* don't decide vignetting in the debayer kernel
* 7.77 ms
* adding back black level support was free
* Revert "adding back black level support was free"
This reverts commit a841d17727886807a040dcf856ab22480fa93eff.
* minor
* rip out unused gain and black level, remove print
* save 150mW
* fix replay test
* fix top/bottom rows
* lame left right edge fix
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Joost Wooning <jwooning@gmail.com>
* camerad: combine debayering and rgb_to_yuv opencl kernels
* fix border
* fix snapshot
* rename function
* update camerad cpu usage
* update camerad power draw
* vignetting equal to previously
* test other local worksize
* use less floats
* reduce amount of code
* move barrier back
* make faster
* fix corners
* cleanup
* cleanup
* allow more jitter on driverState timing
Co-authored-by: Comma Device <device@comma.ai>
* test failure()
* let's just change a tune here
* debug
revert
* debug
* use current commit, not ref_commit
fix
* need to figure out better place for this
* quick test
* test without upload
* temp
* use azure token
* fixes
* shouldn't need this
* debug
* debug
* not getting anything?
* does this mean nothing gets envvars?
* add azure token to docker environment variables
* quote
* move back
* clean up a bit
* more clean up
* like this sorting better
* replace flags with CI and clean up
* test FULL_TEST and minimalize diff a bit
* now test all
* revert tests comments
* remove flags
* revert this
revert this
* now make it fail
* now update ref_commit to last commit (make sure we can re-start this test if we commit before last one finishes uploading)
* fix
fix
fix
fix
* bad commit
* why is it not throwing an exception?
* debug
* URLFile returns empty bytes if using cache and remote file doesn't exist
* we always need to download anyway
* debug...
* duh, wrong file. but neither should have it
* add that back and just check explicitly
* check both
* clean up and make a diff
* stylize
* see if this is a better diff on files changed
* update refs
* revert changes
* only for owners or members
* if we have token access
* if we have token access
* if we have token access
* move up
* clean up
* revert
* move update refs to test_processes
* clean up
* update messages
* update msg
* update README and delete update_refs
* this isn't possible to reach anymore
* fix readme
* better help message
better help message
better help message
* only show basename when uploading, only if failed to find
* test diff
* fix printing old ref commit
* change to using
* update refs
* Revert "update refs"
This reverts commit 2e352a736a6de68e2c7064daa4e2e9409ce77686.
* revert
* ref refers to reference commit/logs, cur refers to current logs/commit (future ref)
* like for better
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Update selfdrive/test/process_replay/test_processes.py
* every time lol
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* test for comparing debayering results to ref commit
* fix run on device
* print more useful diff
* limit to diff output
* remove env var
* ref
* more useful diff
* use real local work size
* remove pyopencl install
* update ref
* include rgb_to_yuv
* fix diff
* get kernel build out of loop
Co-authored-by: Comma Device <device@comma.ai>
* remove log_name
* log without compression
* fix tests
* remove extension for bootlog
* another test fix
* uploader compresses
* also compress in athena
* only compress qlog
* more generic check in do_upload
* fix bootlog compression
* lower loggerd cpu usage
* dont link against bz2
* set core affinity to little cluster
* handle old files
* bump panda & cereal
* bump panda
* rest of references
* regen TOYOTA with safety param 578, TOYOTA2 with 329
* regen rest of routes
* update ref
* bump cereal
* add panda flag for toyota stock long with camera
* clean up
* Add 2022 RAV4 Hybrid from Philly
* fix wrong fw in interface, did this ever work?
* Must be a hybrid
* no radar parsing
* fix can error
* move to own platform
* generate docs
* fix
* Add 2022 Rav4 XSE Australia fingerprint parameters (#24303)
* Update values.py
Add 2022 Rav4 XSE Australia
* add commas
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* bump panda
* wait, the camera doesn't even send 0x343, right?
* use a set instead, more obvious
* don't test without a parser
* bump panda
* flip panda flag
* bump panda
* add commas
* regen and update refs
* set to none by default
* revert parenthesis
* update comment
* bump panda
* regen and update refs
* add test models and update readme
* bump to master
Co-authored-by: BrettLynch123 <34538435+BrettLynch123@users.noreply.github.com>
* use deque for prev_cruise_buttons
* stash
* disallow engagement if resume or decel isn't pressed
* fix buttons
* reduce chances of causing 30-frame fault
Fix clu11
drive down cancel times
* Revert "reduce chances of causing 30-frame fault"
This reverts commit 0f54c051bf5a22b1f584718ec46e78bc3a82a0dd.
* consider pause/resume button
* stash
* Revert "stash"
This reverts commit 551ca7be6c45729f0747abc81cd81894cd621c32.
* sadly some cars need 8 op frames (identical to 4 updates from CLU11)
* add main button
* 6 should be safe
* use max
* clean up
* change to 4 samples and process all messages received, like panda
* bump panda
* test: replay segments with known re-engagements on-device
* Revert "test: replay segments with known re-engagements on-device"
This reverts commit 9730c3c14f942b82b6ed5ef2e81b8ae0126f3006.
* need prev_cruise_buttons as we don't run every CAN message through carstate
* more generic
* extend
* Update selfdrive/car/interfaces.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* 3% faster at 1000000 loops
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* check standstill against panda
* use XMISSION_SPEED for all, and compare to 0
* fix
* only check for Honda for now
* update comment
* update refs
* update refs and update check
* phantom commit
* Initial commit
* Fix bugs
* Need more torque rate
* Cleanup cray cray control
* Write nicely
* Chiiil
* Not relevant for cray cray control
* Do some logging
* Seems like it has more torque than I thought
* Bit more feedforward
* Tune change
* Retune
* Retune
* Little more chill
* Add coroll
* Add corolla
* Give craycray a good name
* Update to proper logging
* D to the PI
* Should be in radians
* Add d
* Start oscillations
* Add D term
* Only change torque rate limits for new tune
* Add d logging
* Should be enough
* Wrong sign in D
* Downtune a little
* Needed to prevent faults
* Add lqr rav4 to tune
* Try derivative again
* Data based retune
* Data based retune
* add friction compensation
* Doesnt need too much P with friction comp
* remove lqr
* Remove kd
* Fix tests
* fix tests
* Too much error
* Get roll induced error under 1cm/deg
* Too much jitter
* Do roll comp
* Add ki
* Final update
* Update refs
* Cleanup latcontrol_torque a little more
* check if regenerated route is enabled
* elif
* initialize CUDA runner before all other processes
* Revert "initialize CUDA runner before all other processes"
This reverts commit 124e3dd4d3408b6649f40b3e6e7f217ca347f59f.
* add back fixes
* fix typo
