* honda_idlestop_timer
* whoops
* simplify
* just use stopping counter and move bosch radarless specific logic into the function
* it's actually 4 seconds
* Update selfdrive/car/honda/hondacan.py
* check equal to 0
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* civic22_long
* Stock requests -4
* add standstill bit
* bump
* fix standstill
* bump
* bump
* bump panda
* Update hondacan.py
* bump panda
* add docs
* bump panda
* bump panda
* fix control_on value
* set control_off
* fix cars.md
* Update panda
* Update opendbc
* Update panda
* Update panda
* allow more braking
* Revert "allow more braking"
This reverts commit ecd2493a436a095b621d815e8b0c7591fa6b93a9.
* Update panda
* fix speed mismatch
* Revert "fix speed mismatch"
This reverts commit ca795dc5bd9d6e841225e1ac1ff93a1f78618513.
* Update panda
* fix speed mismatch and standstill
* delay stopped message to match stock behavior
* green cruise only when enabled
* Update panda
* Revert "green cruise only when enabled"
This reverts commit d21aa5b541a42fa6d1c87e3b065f720af28ff38b.
* lesser nester
* simplify
* simplify control_on
* simplify common signals
* simplify CONTROL_ON
* lessest nester
* hide speed on gas_override to match stock behavior
* tiny simplification, lesser nester
* flip common acc control values around
* move magic number to global variable
* Revert "move magic number to global variable"
This reverts commit 160be0e0872dc08a8786d97fc2125b2eb131362d.
* remove stopped logic
* remove unused variable
* looks ok
* looks better
* simplify override
* clarify CONTROL_OFF signal comment
* civic22_long_bettercontroloff
shorten delay
init
selfless
whoops
move to carcontroller
selfmore
lower time, currently take 5s to kick in
just right
deline
* Rename CONTROL_OFF -> IDLESTOP_ALLOW
This tells the car its ready to turn off the engine, which does so when the car is standstill.
* Update panda
* Update opendbc
* Update panda
* fix docs
* Update panda
* Update panda
* Update opendbc
* Update panda
* Update panda
* Update panda
* Update panda
* bump panda
* idlestop in another PR
* radarless doesn't need tester present
* simplify that
* helper
* one line is fine
* test bump
* bumpback
* disallow
* reduce diff
---------
Co-authored-by: sshane <shane@smiskol.com>
* draft
* bump opendbc
* still draft
* that's not right
* superset of the changes, 33hz
* cleanup
* this should work
* remove line
* pass it in again
* actually no need to check updated now
* now_nanos
* consistent name
* fix replay
* one line isn't that bad
switch
switch
* fix CarController tests
* Update ref_commit
* always log leads, we hide them in ui
* only spam resume when future is > vEgoStarting
* do rest but vw
* vw
* remove comments
* rename to resume
* maintain original button msg rate
* mazda: ensure no resume if cancelling
* same for non-HDA2
* Always run planner if not opLong
* try 0.2
* 0.1 should be pretty safe
* add test for resuming
* fix test
* stricter test, speeds[-1] is 0.14 when starting here
* no walrus
* fixup mazda cc
* remove extra import
* master 2022 Civic
* bump panda
* bump
* bump cereal
* fix
* needed
* try for now
* maybe
* revert for now
* move to Cam parser
* fix
* move to cam
* need AEB_STATUS too
* bump for debug prints
* bump opendbc and add cruise_params
* bump opendbc and update cruise_params
* bump
* test route
* update ref
* Revert "update ref"
This reverts commit 28345dab63d1919865ccb510265222a4cd4252f4.
* cleanup
* just to test
* bump
* revert
* need to send val 12 too?
* change bus
* not needed
* update bus
* syntax
* move this to other bus too
* Revert "move this to other bus too"
This reverts commit 770bf4745ee244c8426ac108f44b67777198d0a7.
* test new lane line signal
* needed too
* maybe need both?
* Test new LKAS hud message
* bump
* missing comma
* missing
* maybe
* add frame and idx
* add in hud_lanes
* switch this too
* bump panda
* add this
* I guess need this too
* to match
* also
* wasnt correct
* bump opendbc
* bump panda
* move to cam parser
* missing
* add here too
* bump
* remove from cam parser
* bump
* back to cam parser
* its 5hz
* bump for new checksum function
* bump for correct frequency
* update frame and idx
* bump
* bump and update
* send set me bit
* bump
* pass these values through
* silly atom
* ret
* fix this
* use copy instead
* add these too
* to check keyerror
* switch
* bump submodules
* send too
* proper
* Replace HUD with BOH
* add dashed lanes
* small fix
* clean up
* not needed anymore
* remove and change
* this too
* dont always set
* remove additional LKAS message
* bump
* add
* to test
* add frame
* bump
* rebase
* remove default values
* rename
* clean up some carstate logic
* regenerate docs
* spacing
* simplify more logic
* bump opendbc
* bump opendbc
* only if radarless
* panda at least builds now
* add comment
* bump
* fixes
* bump opendbc
* bump opendbc
fix for new DBC
* bump opendbc
* bump opendbc
* carstate: fix bus, parser signals
* Set safety param
* pt bus is 0, not 1
* Fix SCM_BUTTONS and bump panda and opendbc
* fixes for ACC_CONTROL
* bump opendbc
* bump opendbc
* convert from MPH on HONDA_BOSCH_RADARLESS
move is_metric
* make sure we don't disable if radarless
* don't show incorrect harness on website
don't show incorrect harness on website
* bump panda
* remove/update comments
* bump panda
* Fix harnesses
* one line check
* bump opendbc
* remove this
* Some carstate cleanup
We removed STANDSTILL->WHEELS_MOVING
we don't use CRUISE_PARAMS
add back
add back
* more cleanup
* update docs
* marketing says it has TJA and ACC with low speed follow
* send buttons on bus 0
bump panda
* comment
* camera needs to see buttons on bus 2
comment
* bump panda
* add to releases
* remove comments
* comment
* we don't use stock hud yet
Co-authored-by: vanillagorillaa <ntmccoy@yahoo.com>
Co-authored-by: vanillagorillaa <31773928+vanillagorillaa@users.noreply.github.com>
Co-authored-by: kevinharbin <76784413+kevinharbin@users.noreply.github.com>
* proof of concept
* actuators packet describes which actuators are active
* bump cereal
* fixes
* not needed for this PR
* Do Toyota
* add back controlsState.active
* bump cereal
* rest of cars
* in actuators
* add active back
* which
* use controlsState.active for now
* will make an issue
* Update selfdrive/controls/controlsd.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* move local lat_active checks into CC.latActive
* remove redundant checks
* move comment
move comment
* fix joystick mode
* get enabled from carcontrol
* do standstill check in controlsd
* make sure we consider the gas press case for GM
* use CC.actuators
* fix
* capitalization
* Bump cereal
Bump cereal
* make intermediate actuators
* similar convention to before
* clean that up
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* check in tuple instead of list
* Update selfdrive/car/toyota/carcontroller.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Update selfdrive/car/mazda/interface.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* revert changes to standstill logic
* start with mostly open loop
* Revert "revert changes to standstill logic"
This reverts commit d737d858e7708aedaf09cfc068b85398161e9bbe.
* proper clipping
* less lag
* less gas command
* start gas from -0.2
* controls should take care of that
* use CarControllerParams
* switch to braking sooner
* Revert "switch to braking sooner"
This reverts commit cf11dae334ccb369f625d4b13b7cd4176156a446.
* 2.5x more P
* use active
* engage on rising edge
* Revert "engage on rising edge"
This reverts commit c972956cb460eedaff3d0169a40673a6ea933385.
* update ref
* add higher set speed
* freeze when close to cruise
* dont bias this
* higher set speed
* start high
* 2mph might be needed
* better condition
* limit accel windup like this
* wrong name
* retune civic
* seems smooth
* back to normal
* new ref
* fix conflict
* runs
* rm
* accel scale is 4
* toyota should be good
* more cleanup
* fixup
* better naming
* update ref
* deprecated
* sending brake when not enable causes a fault
* rm gas and brake
* unused
* update ref
* acura logic is no more
* wrong before
* revert tuning cleanup
* adress comments
* update ref
* already on master
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* not used
* just use gas
* allow gas
* try 0
* typo
* set to default
* set default
* makes more sense
* downtune and cleanup
* max accel always
* that is needed to smooth gas to brake
* try downtuning low speed
* try from default
* nidec is not bosch
* air resistance exists
* more smoothing
* wind brake sooner
* Civic experiments2 (#21862)
* control on throttle
* throttle modifier
* get acura in line
* try set speed control again (#21870)
* new acura function
* put back
* put back
* make linter happy
* define wind_brake once
* Civic experiments (#21908)
* remove civic
* start from scratch
* data drivenm
* the data does not lie
* data collection
* data driven
* limit
* final candidate
* fix windbrake
* Civic experiments (#21910)
* remove civic
* start from scratch
* data drivenm
* the data does not lie
* data collection
* data driven
* limit
* final candidate
* fix windbrake
* add acura control
* more cleanup
* cleanup
* update ref
* clip
* seems to fault
* always continuous
* new ref
* untested changes
* set compute_gb
* community feature for good measure
* add code for rolling backwards
* init needs CarParams
* stay in elm mode until carParams is written
* fix tester present bus number
* fix can errors
* fix enableCruise flag
* print when radar disable is done
* move retry logic to controlsd
* move lookup table into carcontroller params
* cleanup brake error values
* make init return
* that should be 1
* floats
* back to no failure handling
* try simplify knockout
* bump panda
* Move flags to panda
* add warnings
* Revert "try simplify knockout"
This reverts commit 4f496245791ea6bd041d4412b96035c6b434b91c.
* add note about LoC.long_control_state
* update ref
