onepilot/tools/README.md

# openpilot tools

## System Requirements

openpilot is developed and tested on **Ubuntu 24.04**, which is the primary development target aside from the [supported embedded hardware](https://github.com/commaai/openpilot#running-on-a-dedicated-device-in-a-car).

Most of openpilot should work natively on macOS. On Windows you can use WSL for a nearly native Ubuntu experience. Running natively on any other system is not currently recommended and will likely require modifications.

## Native setup on Ubuntu 24.04 and macOS

Follow these instructions for a fully managed setup experience. If you'd like to manage the dependencies yourself, just read the setup scripts in this directory.

**1. Clone openpilot**
``` bash
git clone https://github.com/commaai/openpilot.git
```

**2. Run the setup script**
``` bash
cd openpilot
tools/op.sh setup
```

**3. Activate a Python shell**
Activate a shell with the Python dependencies installed:
``` bash
source .venv/bin/activate
```

**4. Build openpilot**
``` bash
scons -u -j$(nproc)
```

## WSL on Windows

[Windows Subsystem for Linux (WSL)](https://docs.microsoft.com/en-us/windows/wsl/about) should provide a similar experience to native Ubuntu. [WSL 2](https://docs.microsoft.com/en-us/windows/wsl/compare-versions) specifically has been reported by several users to be a seamless experience.

Follow [these instructions](https://docs.microsoft.com/en-us/windows/wsl/install) to setup the WSL and install the `Ubuntu-24.04` distribution. Once your Ubuntu WSL environment is setup, follow the Linux setup instructions to finish setting up your environment. See [these instructions](https://learn.microsoft.com/en-us/windows/wsl/tutorials/gui-apps) for running GUI apps.

**NOTE**: If you are running WSL and any GUIs are failing (segfaulting or other strange issues) even after following the steps above, you may need to enable software rendering with `LIBGL_ALWAYS_SOFTWARE=1`, e.g. `LIBGL_ALWAYS_SOFTWARE=1 selfdrive/ui/ui`.

## CTF
Learn about the openpilot ecosystem and tools by playing our [CTF](/tools/CTF.md).

## Directory Structure

```
├── cabana/             # View and plot CAN messages from drives or in realtime
├── camerastream/       # Cameras stream over the network
├── joystick/           # Control your car with a joystick
├── lib/                # Libraries to support the tools and reading openpilot logs
├── plotjuggler/        # A tool to plot openpilot logs
├── replay/             # Replay drives and mock openpilot services
├── scripts/            # Miscellaneous scripts
├── serial/             # Tools for using the comma serial
├── sim/                # Run openpilot in a simulator
└── webcam/             # Run openpilot on a PC with webcams
```