tsl/tools

openpilot-tools

Repo which contains tools to facilitate development and debugging of openpilot.

Table of Contents

• Requirements
• Setup
• Tool examples
  • Replay driving data
  • Debug car controls
  • Stream replayed CAN messages to EON
  • Stream EON video data to a PC
• Welcomed contributions

Requirements

openpilot-tools and the following setup steps are developed and tested on Ubuntu 16.04, MacOS 10.14.2 and Python 3.7.3.

Setup

TODO: These instructions maybe outdated, follow ubuntu_setup.sh setup instructions

1. Install native dependencies (Mac and Ubuntu sections listed below)

   Ubuntu

   • core tools

     sudo apt install git curl python-pip
     sudo pip install --upgrade pip>=18.0 pipenv
     

   • ffmpeg (tested with 3.3.2)

     sudo apt install ffmpeg libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libavresample-dev libavfilter-dev
     

   • build tools

     sudo apt install autoconf automake clang clang-3.8 libtool pkg-config build-essential
     

   • libarchive-dev (tested with 3.1.2-11ubuntu0.16.04.4)

     sudo apt install libarchive-dev
     

   • qt python binding (tested with python-qt4, 4.11.4+dfsg-1build4)

     sudo apt install python-qt4
     

   • zmq 4.2.3 (required for replay)

     curl -LO https://github.com/zeromq/libzmq/releases/download/v4.2.3/zeromq-4.2.3.tar.gz
     tar xfz zeromq-4.2.3.tar.gz
     cd zeromq-4.2.3
     ./autogen.sh
     ./configure CPPFLAGS=-DPIC CFLAGS=-fPIC CXXFLAGS=-fPIC LDFLAGS=-fPIC --disable-shared --enable-static
     make
     sudo make install
     

   Mac

   • brew

     /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
     

   • core tools

     brew install git
     sudo pip install --upgrade pip pipenv
     xcode-select --install
     

   • ffmpeg (tested with 3.4.1)

     brew install ffmpeg
     

   • build tools

     brew install autoconf automake libtool llvm pkg-config
     

   • libarchive-dev (tested with 3.3.3)

     brew install libarchive
     

   • qt for Mac

     brew install qt
     

   • zmq 4.3.1 (required for replay)

     brew install zeromq
     

2. Install Cap'n Proto

   curl -O https://capnproto.org/capnproto-c++-0.6.1.tar.gz
   tar xvf capnproto-c++-0.6.1.tar.gz
   cd capnproto-c++-0.6.1
   ./configure --prefix=/usr/local CPPFLAGS=-DPIC CFLAGS=-fPIC CXXFLAGS=-fPIC LDFLAGS=-fPIC --disable-shared --enable-static
   make -j4
   sudo make install
   
   cd ..
   git clone https://github.com/commaai/c-capnproto.git
   cd c-capnproto
   git submodule update --init --recursive
   autoreconf -f -i -s
   CFLAGS="-fPIC" ./configure --prefix=/usr/local
   make -j4
   sudo make install
   

3. Clone openpilot if you haven't already

   git clone https://github.com/commaai/openpilot.git
   cd openpilot
   pipenv install # Install dependencies in a virtualenv
   pipenv shell # Activate the virtualenv
   

   For Mac users

   Recompile longitudinal_mpc for mac

   Navigate to:

   cd selfdrive/controls/lib/longitudinal_mpc
   make clean
   make
   

4. Clone tools within openpilot, and install dependencies

   cd tools
   pip install -r requirements.txt # Install openpilot-tools dependencies in virtualenv
   

5. Add openpilot to your PYTHONPATH.

   For bash users:

   echo 'export PYTHONPATH="$PYTHONPATH:<path-to-openpilot>"' >> ~/.bashrc
   source ~/.bashrc
   

6. Add some folders to root

   sudo mkdir /data
   sudo mkdir /data/params
   sudo chown $USER /data/params
   

7. Try out some tools!

Tool examples

Replay driving data

Hardware needed: none

unlogger.py replays data collected with chffrplus or openpilot.

Unlogger with remote data:

# Log in via browser
python lib/auth.py

# Start unlogger
python replay/unlogger.py <route-name>
#Example:
#python replay/unlogger.py '3533c53bb29502d1|2019-12-10--01-13-27'

# In another terminal you can run a debug visualizer:
python replay/ui.py   # Define the environmental variable HORIZONTAL is the ui layout is too tall

Unlogger with local data downloaded from device or https://my.comma.ai:

python replay/unlogger.py <route-name> <path-to-data-directory>

#Example:

#python replay/unlogger.py '99c94dc769b5d96e|2018-11-14--13-31-42' /home/batman/unlogger_data

#Within /home/batman/unlogger_data:
#  99c94dc769b5d96e|2018-11-14--13-31-42--0--fcamera.hevc
#  99c94dc769b5d96e|2018-11-14--13-31-42--0--rlog.bz2
#  ...

LogReader with remote data

from tools.lib.logreader import LogReader
from tools.lib.route import Route
route = Route('3533c53bb29502d1|2019-12-10--01-13-27')
log_paths = route.log_paths()
events_seg0 = list(LogReader(log_paths[0]))
print(len(events_seg0), 'events logged in first segment')

Debug car controls

Hardware needed: panda, giraffe, joystick

Use the panda's OBD-II port to connect with your car and a usb cable to connect the panda to your pc. Also, connect a joystick to your pc.

joystickd.py runs a deamon that reads inputs from a joystick and publishes them over zmq. boardd.py sends the CAN messages from your pc to the panda. debug_controls is a mocked version of controlsd.py and uses input from a joystick to send controls to your car.

Usage:

python carcontrols/joystickd.py

# In another terminal:
selfdrive/boardd/tests/boardd_old.py # Make sure the safety setting is hardcoded to ALL_OUTPUT

# In another terminal:
python carcontrols/debug_controls.py

Stream replayed CAN messages to EON

Hardware needed: 2 x panda, debug board, EON.

It is possible to replay CAN messages as they were recorded and forward them to a EON.  Connect 2 pandas to the debug board. A panda connects to the PC, the other panda connects to the EON.

Usage:

# With MOCK=1 boardd will read logged can messages from a replay and send them to the panda.
MOCK=1 selfdrive/boardd/tests/boardd_old.py

# In another terminal:
python replay/unlogger.py <route-name> <path-to-data-directory>

Stream EON video data to a PC

Hardware needed: EON, comma Smays.

You can connect your EON to your pc using the Ethernet cable provided with the comma Smays and you'll be able to stream data from your EON, in real time, with low latency. A useful application is being able to stream the raw video frames at 20fps, as captured by the EON's camera.

Usage:

# ssh into the eon and run loggerd with the flag "--stream". In ../selfdrive/manager.py you can change:
# ...
# "loggerd": ("selfdrive/loggerd", ["./loggerd"]),
# ...
# with:
# ...
# "loggerd": ("selfdrive/loggerd", ["./loggerd", "--stream"]),
# ...

# On the PC:
# To receive frames from the EON and re-publish them. Set PYGAME env variable if you want to display the video stream
python streamer/streamerd.py

Welcomed contributions

• Documentation: code comments, better tutorials, etc..
• Support for other platforms other than Ubuntu 16.04.
• Performance improvements: the tools have been developed on high-performance workstations (12+ logical cores with 32+ GB of RAM), so they are not optimized for running efficiently. For example, ui.py might not be able to run real-time on most PCs.
• More tools: anything that you think might be helpful to others.