tsl/tools/replay

Replay

Replay driving data

replay replays all the messages logged while running openpilot.

# Log in via browser to have access to routes from your comma account
python tools/lib/auth.py

# Start a replay
tools/replay/replay <route-name>

# Example:
tools/replay/replay 'a2a0ccea32023010|2023-07-27--13-01-19'
# or use --demo to replay the default demo route:
tools/replay/replay --demo

# watch the replay with the normal openpilot UI
cd selfdrive/ui && ./ui

# or try out a debug visualizer:
python replay/ui.py

usage

$ tools/replay/replay -h
Usage: tools/replay/replay [options] route
Mock openpilot components by publishing logged messages.

Options:
  -h, --help             Displays this help.
  -a, --allow <allow>    whitelist of services to send
  -b, --block <block>    blacklist of services to send
  -c, --cache <n>        cache <n> segments in memory. default is 5
  -s, --start <seconds>  start from <seconds>
  -x <speed>             playback <speed>. between 0.2 - 3
  --demo                 use a demo route instead of providing your own
  --data_dir <data_dir>  local directory with routes
  --prefix <prefix>      set OPENPILOT_PREFIX
  --dcam                 load driver camera
  --ecam                 load wide road camera
  --no-loop              stop at the end of the route
  --no-cache             turn off local cache
  --qcam                 load qcamera
  --no-hw-decoder        disable HW video decoding
  --no-vipc              do not output video
  --all                  do output all messages including uiDebug, userFlag.
                         this may causes issues when used along with UI

Arguments:
  route                  the drive to replay. find your drives at
                         connect.comma.ai

watch3

watch all three cameras simultaneously from your comma three routes with watch3

simply replay a route using the --dcam and --ecam flags:

# start a replay
cd tools/replay && ./replay --demo --dcam --ecam

# then start watch3
cd selfdrive/ui && ./watch3

Stream CAN messages to your device

Replay CAN messages as they were recorded using a panda jungle. The jungle has 6x OBD-C ports for connecting all your comma devices. Check out the jungle repo for more info.

In order to run your device as if it was in a car:

• connect a panda jungle to your PC
• connect a comma device or panda to the jungle via OBD-C
• run can_replay.py

batman:replay$ ./can_replay.py -h
usage: can_replay.py [-h] [route_or_segment_name]

Replay CAN messages from a route to all connected pandas and jungles
in a loop.

positional arguments:
  route_or_segment_name
                        The route or segment name to replay. If not
                        specified, a default public route will be
                        used. (default: None)

optional arguments:
  -h, --help            show this help message and exit