panda/board
Adeeb Shihadeh 5ee262f3cb
H7 CR3 notes (#1985)
2024-07-17 11:19:24 -07:00
..
boards enable misra-c2012-11.8 (#1916) 2024-03-24 12:38:25 -07:00
debug update to ubuntu 24.04 (#1941) 2024-04-28 15:32:18 -07:00
drivers remove void return (#1963) 2024-05-30 14:21:42 -07:00
jungle add assert_fatal function (#1976) 2024-06-26 16:59:08 -07:00
obj
safety Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
stm32f4 Separate F4 and H7 includes (#1955) 2024-05-26 13:12:25 -07:00
stm32h7 H7 CR3 notes (#1985) 2024-07-17 11:19:24 -07:00
README.md Docs update (#1769) 2023-12-10 11:14:53 -08:00
SConscript Revert "H7: detect board type with second ID pin group (#1975)" 2024-07-14 15:56:18 -07:00
__init__.py
bootstub.c (almost) enable cppcheck unusedFunction (#1875) 2024-02-17 14:16:15 -08:00
bootstub_declarations.h enable misra-c2012-11.8 (#1916) 2024-03-24 12:38:25 -07:00
can_comms.h Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
can_definitions.h remove rest of gmlan (#1908) 2024-03-21 13:56:36 -07:00
comms_definitions.h enable misra-constParameterPointer (#1826) 2024-01-20 21:50:42 -08:00
config.h remove unused deepsleep stuff (#1914) 2024-03-22 14:48:49 -07:00
crc.h enable misra-constParameterPointer (#1826) 2024-01-20 21:50:42 -08:00
critical.h
dfu_util_f4.sh DFU flasher: permissions and address 2022-08-25 10:24:25 -07:00
dfu_util_h7.sh flashing: unify recover.sh (#1043) 2022-08-24 19:15:25 -07:00
early_init.h Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
fake_stm.h Remove flash logging (#1674) 2023-09-30 12:49:46 -07:00
faults.h remove rest of gmlan (#1908) 2024-03-21 13:56:36 -07:00
flash.py exit flashing scripts with error if no pandas 2024-03-21 13:04:45 -07:00
flasher.h (almost) enable cppcheck unusedFunction (#1875) 2024-02-17 14:16:15 -08:00
gdb.sh H7 CR3 notes (#1985) 2024-07-17 11:19:24 -07:00
health.h remove rest of gmlan (#1908) 2024-03-21 13:56:36 -07:00
libc.h add assert_fatal function (#1976) 2024-06-26 16:59:08 -07:00
main.c add assert_fatal function (#1976) 2024-06-26 16:59:08 -07:00
main_comms.h remove unused deepsleep stuff (#1914) 2024-03-22 14:48:49 -07:00
main_declarations.h enable misra-c2012-11.8 (#1916) 2024-03-24 12:38:25 -07:00
power_saving.h remove HW GMLAN support (#1848) 2024-02-03 23:18:33 -08:00
provision.h Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
recover.py exit flashing scripts with error if no pandas 2024-03-21 13:04:45 -07:00
safety.h remove comma pedal (#1902) 2024-03-17 22:22:46 -07:00
safety_declarations.h Enable misra-c2012-1.2 (#1962) 2024-05-30 22:13:47 -07:00
utils.h Enable misra-c2012-1.2 (#1962) 2024-05-30 22:13:47 -07:00

README.md

Programming

./flash.py        # flash application
./recover.py      # flash bootstub

Debugging

To print out the serial console from the STM32, run tests/debug_console.py

Troubleshooting

If your panda will not flash and green LED is on, use recover.py. If panda is blinking fast with green LED, use flash.py.

Otherwise if LED is off and panda can't be seen with lsusb command, use panda paw to go into DFU mode.

If your device has an internal panda and none of the above works, try running ../tests/reflash_internal_panda.py.