mirror of https://github.com/commaai/panda.git
53 lines
1.7 KiB
C
53 lines
1.7 KiB
C
// ///////////////////////////////////////////////////////////// //
|
|
// Hardware abstraction layer for all different supported boards //
|
|
// ///////////////////////////////////////////////////////////// //
|
|
#include "boards/board_declarations.h"
|
|
#include "boards/unused_funcs.h"
|
|
|
|
// ///// Board definition and detection ///// //
|
|
#include "stm32h7/lladc.h"
|
|
#include "drivers/harness.h"
|
|
#include "drivers/fan.h"
|
|
#include "stm32h7/llfan.h"
|
|
#include "stm32h7/lldac.h"
|
|
#include "drivers/beeper.h"
|
|
#include "drivers/fake_siren.h"
|
|
#include "stm32h7/sound.h"
|
|
#include "drivers/clock_source.h"
|
|
#include "boards/red.h"
|
|
#include "boards/red_chiplet.h"
|
|
#include "boards/tres.h"
|
|
#include "boards/cuatro.h"
|
|
|
|
|
|
void detect_board_type(void) {
|
|
// On STM32H7 pandas, we use two different sets of pins.
|
|
const uint8_t id1 = detect_with_pull(GPIOF, 7, PULL_UP) |
|
|
(detect_with_pull(GPIOF, 8, PULL_UP) << 1U) |
|
|
(detect_with_pull(GPIOF, 9, PULL_UP) << 2U) |
|
|
(detect_with_pull(GPIOF, 10, PULL_UP) << 3U);
|
|
|
|
const uint8_t id2 = detect_with_pull(GPIOD, 4, PULL_UP) |
|
|
(detect_with_pull(GPIOD, 5, PULL_UP) << 1U) |
|
|
(detect_with_pull(GPIOD, 6, PULL_UP) << 2U) |
|
|
(detect_with_pull(GPIOD, 7, PULL_UP) << 3U);
|
|
|
|
if (id2 == 3U) {
|
|
hw_type = HW_TYPE_CUATRO;
|
|
current_board = &board_cuatro;
|
|
} else if (id1 == 0U) {
|
|
hw_type = HW_TYPE_RED_PANDA;
|
|
current_board = &board_red;
|
|
} else if (id1 == 1U) {
|
|
// deprecated
|
|
//hw_type = HW_TYPE_RED_PANDA_V2;
|
|
hw_type = HW_TYPE_UNKNOWN;
|
|
} else if (id1 == 2U) {
|
|
hw_type = HW_TYPE_TRES;
|
|
current_board = &board_tres;
|
|
} else {
|
|
hw_type = HW_TYPE_UNKNOWN;
|
|
print("Hardware type is UNKNOWN!\n");
|
|
}
|
|
}
|