* fake siren works
* this receives something
* microphone in SAI1 POC
* this receives audio again
* double buffer DMA?
* RX DMA works
* wip
* needs cleanup, but this plays
* cleanup of playback
* print mic
* deal with stereo in
* the DMA from SAI1 -> SAI4 doesn't work yet
* this puts mic data in a buf
* this gets sound to the 845
* wip: still garbage from the mic
* inefficient, but it does record the mic
* sine isn't used
* comment out mic for now
* fix misra
* remove mic
* more cleanup
* add amp enable/disable
* no more debug
* newline
---------
Co-authored-by: Comma Device <device@comma.ai>
* refactor voltage / current reading
* fix bug and add readout to cuatro
* fix misra?
* just suppress then
---------
Co-authored-by: Comma Device <device@comma.ai>
* read in mV and make threshold board-dependent
* refactor and add SBU voltages to health
* refactor relay driving
* more refactoring and readout lock
* avoid race condition
* fix misra
* continuous detection
* 1Hz is fine
* another race condition
* use harness detection to trigger bootkick
* update orientation detection test
* more in-depth harness tests
* fix ignition
* fix
* raise threshold
* temporarily disable Jenkins
* firmware
* python lib
* tests
* ..
* usb load switch to high
* it is still red
* usb power mode remove
* Revert "temporarily disable Jenkins"
This reverts commit a911cfad8d.
* forgot this
* common periph
* change name
* board tick
* add V2 to CI
* update known bootstub
* fast rpm measurement
* fix indentation
* this seems stable
* clip fan integral
* fix misra
* add fan power to health
* board-specific max rpm
* refactor fan enable
* cleanup
* stall detection and reset
Co-authored-by: Comma Device <device@comma.ai>
* H7 drivers
* Include H7 into the code
* fix flash write for H7
* get serial from flasher.h from F4 and H7
* flash.sh and recover.sh for gen3
* add set_data_speed for BRS CAN FD
* build all fws
* gen3 to panda lib
* gen3 name in scons project
* disable fd can and brs
* gen3 to CI tests
* jenkins fix for new tests and build_all
* fix pedal test
* pedal in panda tests again...
* cleanup llfdcan.h
* cleanup clock.h
* Add LDORDY bit check instead of delay
* missing define in stm32h735xx.h lib
* board_id helper
* enable debug detection again
* clean gpio inits
* fix board_id helper, make cleaner
* comment MCUs in stm lib for faster misra
* target MCU
* misra-5.5
* improve headers and misra speed
* cleanup CI tests
* change naming from gen3 to h7
* readable if statement
* cleanup llusb.h
* only cycle one transceifer in bus-off
* move unused funcs to common header
* bus_off_err reset
* misra 10.4 fdcan
* extern to can_data_speed variable
* limit can_data_speed array size to 3
* reinit fd can on data speed change
* Improve test with ELM327 and extaddr check
* bugfix for fdcan
* panda python config naming
* abstracted init request in llfdcan
* misra fdcan
* Improve llusb.h for H7
* Let refactoring begin!
* Fix pedal build
* Fix pedal safety tests
* Forgot few TIM2 instances
* Try this way with misra
* More misras...
* More misras...
* Still fighting with misra blindfolded
* Almost got it!
* Last misra error..
* Last misra error..
* Misra works locally..
* Maybe this?
* Looks like it was cppcheck bug, revert changes
* Suggested changes and reverts
* File structure change
* revert includes
* remove spaces
* remove timer delay
* endings
* more typing
* rename early to early_initialization
* Remove delay_us
* Revert RTC default values
* Revert initialization sequence
* Fix quotes
* Revert
* Return TIM6EN
* Alias slow timer to TICK_TIMER
* Refactor files structure
* Remove definition of PANDA
* Abstract timers
* Fix include
* tick_timer_init
* Split usb driver
* Move LL stuff: adc
* Move LL stuff: usb
* Fix include again...
* Will check pedal builds also locally..
* Move LL stuff: CAN
* Move LL stuff: clock
* Rename common to peripherals and move
* Move board HAL
* Change include, not needed for pedal
* llgpio to gpio and new lines fix
* remove board_has_relay, not used
* Remove board_functions.h and add to board struct
* Move include
* Fk MISRA...
* has_onboard_gmlan to has_hw_gmlan
* Typos
* Move board_declarations include
* Shuffle
* More abstraction
* fix paths, fix cppcheck test
* Fix for pedal build with USB
Robbe Derks
Maxime Desroches
Adeeb Shihadeh
Igor Biletskyy