diff --git a/board/boards/black.h b/board/boards/black.h
index a1297345b..293a48dd9 100644
--- a/board/boards/black.h
+++ b/board/boards/black.h
@@ -57,26 +57,6 @@ void black_set_usb_load_switch(bool enabled) {
   set_gpio_output(GPIOB, 1, !enabled);
 }
 
-void black_set_usb_power_mode(uint8_t mode) {
-  bool valid = false;
-  switch (mode) {
-    case USB_POWER_CLIENT:
-      black_set_usb_load_switch(false);
-      valid = true;
-      break;
-    case USB_POWER_CDP:
-      black_set_usb_load_switch(true);
-      valid = true;
-      break;
-    default:
-      puts("Invalid USB power mode\n");
-      break;
-  }
-  if (valid) {
-    usb_power_mode = mode;
-  }
-}
-
 void black_set_gps_mode(uint8_t mode) {
   switch (mode) {
     case GPS_DISABLED:
@@ -162,9 +142,6 @@ void black_init(void) {
   // Turn on USB load switch.
   black_set_usb_load_switch(true);
 
-  // Set right power mode
-  black_set_usb_power_mode(USB_POWER_CDP);
-
   // Initialize harness
   harness_init();
 
@@ -204,6 +181,7 @@ const harness_configuration black_harness_config = {
 
 const board board_black = {
   .board_type = "Black",
+  .board_tick = unused_board_tick,
   .harness_config = &black_harness_config,
   .has_gps = true,
   .has_hw_gmlan = false,
@@ -215,10 +193,8 @@ const board board_black = {
   .enable_can_transceiver = black_enable_can_transceiver,
   .enable_can_transceivers = black_enable_can_transceivers,
   .set_led = black_set_led,
-  .set_usb_power_mode = black_set_usb_power_mode,
   .set_gps_mode = black_set_gps_mode,
   .set_can_mode = black_set_can_mode,
-  .usb_power_mode_tick = unused_usb_power_mode_tick,
   .check_ignition = black_check_ignition,
   .read_current = unused_read_current,
   .set_fan_enabled = unused_set_fan_enabled,
diff --git a/board/boards/board_declarations.h b/board/boards/board_declarations.h
index 50a7ee451..41eff37d1 100644
--- a/board/boards/board_declarations.h
+++ b/board/boards/board_declarations.h
@@ -3,10 +3,8 @@ typedef void (*board_init)(void);
 typedef void (*board_enable_can_transceiver)(uint8_t transceiver, bool enabled);
 typedef void (*board_enable_can_transceivers)(bool enabled);
 typedef void (*board_set_led)(uint8_t color, bool enabled);
-typedef void (*board_set_usb_power_mode)(uint8_t mode);
 typedef void (*board_set_gps_mode)(uint8_t mode);
 typedef void (*board_set_can_mode)(uint8_t mode);
-typedef void (*board_usb_power_mode_tick)(uint32_t uptime);
 typedef bool (*board_check_ignition)(void);
 typedef uint32_t (*board_read_current)(void);
 typedef void (*board_set_ir_power)(uint8_t percentage);
@@ -14,6 +12,7 @@ typedef void (*board_set_fan_enabled)(bool enabled);
 typedef void (*board_set_phone_power)(bool enabled);
 typedef void (*board_set_clock_source_mode)(uint8_t mode);
 typedef void (*board_set_siren)(bool enabled);
+typedef void (*board_board_tick)(bool ignition, bool usb_enum, bool heartbeat_seen);
 
 struct board {
   const char *board_type;
@@ -28,10 +27,8 @@ struct board {
   board_enable_can_transceiver enable_can_transceiver;
   board_enable_can_transceivers enable_can_transceivers;
   board_set_led set_led;
-  board_set_usb_power_mode set_usb_power_mode;
   board_set_gps_mode set_gps_mode;
   board_set_can_mode set_can_mode;
-  board_usb_power_mode_tick usb_power_mode_tick;
   board_check_ignition check_ignition;
   board_read_current read_current;
   board_set_ir_power set_ir_power;
@@ -39,6 +36,7 @@ struct board {
   board_set_phone_power set_phone_power;
   board_set_clock_source_mode set_clock_source_mode;
   board_set_siren set_siren;
+  board_board_tick board_tick;
 };
 
 // ******************* Definitions ********************
@@ -73,6 +71,3 @@ struct board {
 #define CAN_MODE_GMLAN_CAN2 1U
 #define CAN_MODE_GMLAN_CAN3 2U
 #define CAN_MODE_OBD_CAN2 3U
-
-// ********************* Globals **********************
-uint8_t usb_power_mode = USB_POWER_NONE;
diff --git a/board/boards/dos.h b/board/boards/dos.h
index 38d647037..1e61a2398 100644
--- a/board/boards/dos.h
+++ b/board/boards/dos.h
@@ -53,23 +53,15 @@ void dos_set_bootkick(bool enabled){
   set_gpio_output(GPIOC, 4, !enabled);
 }
 
-void dos_set_usb_power_mode(uint8_t mode) {
-  bool valid = false;
-  switch (mode) {
-    case USB_POWER_CLIENT:
-      dos_set_bootkick(false);
-      valid = true;
-      break;
-    case USB_POWER_CDP:
-      dos_set_bootkick(true);
-      valid = true;
-      break;
-    default:
-      puts("Invalid USB power mode\n");
-      break;
-  }
-  if (valid) {
-    usb_power_mode = mode;
+void dos_board_tick(bool ignition, bool usb_enum, bool heartbeat_seen) {
+  if (ignition && !usb_enum) {
+    // enable bootkick if ignition seen
+    dos_set_bootkick(true);
+  } else if (heartbeat_seen) {
+    // disable once openpilot is up
+    dos_set_bootkick(false);
+  } else {
+
   }
 }
 
@@ -173,6 +165,9 @@ void dos_init(void) {
   dos_set_led(LED_GREEN, false);
   dos_set_led(LED_BLUE, false);
 
+  // Bootkick
+  dos_set_bootkick(true);
+
   // Set normal CAN mode
   dos_set_can_mode(CAN_MODE_NORMAL);
 
@@ -201,6 +196,7 @@ const harness_configuration dos_harness_config = {
 
 const board board_dos = {
   .board_type = "Dos",
+  .board_tick = dos_board_tick,
   .harness_config = &dos_harness_config,
   .has_gps = false,
   .has_hw_gmlan = false,
@@ -212,15 +208,13 @@ const board board_dos = {
   .enable_can_transceiver = dos_enable_can_transceiver,
   .enable_can_transceivers = dos_enable_can_transceivers,
   .set_led = dos_set_led,
-  .set_usb_power_mode = dos_set_usb_power_mode,
   .set_gps_mode = unused_set_gps_mode,
   .set_can_mode = dos_set_can_mode,
-  .usb_power_mode_tick = unused_usb_power_mode_tick,
   .check_ignition = dos_check_ignition,
   .read_current = unused_read_current,
   .set_fan_enabled = dos_set_fan_enabled,
   .set_ir_power = dos_set_ir_power,
   .set_phone_power = unused_set_phone_power,
   .set_clock_source_mode = dos_set_clock_source_mode,
-  .set_siren = dos_set_siren
+  .set_siren = unused_set_siren
 };
diff --git a/board/boards/grey.h b/board/boards/grey.h
index 4ff6f8987..fa5e67d25 100644
--- a/board/boards/grey.h
+++ b/board/boards/grey.h
@@ -35,6 +35,7 @@ void grey_set_gps_mode(uint8_t mode) {
 
 const board board_grey = {
   .board_type = "Grey",
+  .board_tick = unused_board_tick,
   .harness_config = &white_harness_config,
   .has_gps = true,
   .has_hw_gmlan = true,
@@ -46,10 +47,8 @@ const board board_grey = {
   .enable_can_transceiver = white_enable_can_transceiver,
   .enable_can_transceivers = white_enable_can_transceivers,
   .set_led = white_set_led,
-  .set_usb_power_mode = white_set_usb_power_mode,
   .set_gps_mode = grey_set_gps_mode,
   .set_can_mode = white_set_can_mode,
-  .usb_power_mode_tick = unused_usb_power_mode_tick,
   .check_ignition = white_check_ignition,
   .read_current = white_read_current,
   .set_fan_enabled = unused_set_fan_enabled,
diff --git a/board/boards/pedal.h b/board/boards/pedal.h
index 72286e646..ccd36b89b 100644
--- a/board/boards/pedal.h
+++ b/board/boards/pedal.h
@@ -30,11 +30,6 @@ void pedal_set_led(uint8_t color, bool enabled) {
   }
 }
 
-void pedal_set_usb_power_mode(uint8_t mode){
-  usb_power_mode = mode;
-  puts("Trying to set USB power mode on pedal. This is not supported.\n");
-}
-
 void pedal_set_gps_mode(uint8_t mode) {
   UNUSED(mode);
   puts("Trying to set ESP/GPS mode on pedal. This is not supported.\n");
@@ -78,6 +73,7 @@ const harness_configuration pedal_harness_config = {
 
 const board board_pedal = {
   .board_type = "Pedal",
+  .board_tick = unused_board_tick,
   .harness_config = &pedal_harness_config,
   .has_gps = false,
   .has_hw_gmlan = false,
@@ -89,10 +85,8 @@ const board board_pedal = {
   .enable_can_transceiver = pedal_enable_can_transceiver,
   .enable_can_transceivers = pedal_enable_can_transceivers,
   .set_led = pedal_set_led,
-  .set_usb_power_mode = pedal_set_usb_power_mode,
   .set_gps_mode = pedal_set_gps_mode,
   .set_can_mode = pedal_set_can_mode,
-  .usb_power_mode_tick = unused_usb_power_mode_tick,
   .check_ignition = pedal_check_ignition,
   .read_current = unused_read_current,
   .set_fan_enabled = unused_set_fan_enabled,
diff --git a/board/boards/red.h b/board/boards/red.h
index ac22f78f6..2ba2ee1e3 100644
--- a/board/boards/red.h
+++ b/board/boards/red.h
@@ -53,25 +53,6 @@ void red_set_usb_load_switch(bool enabled) {
   set_gpio_output(GPIOB, 14, !enabled);
 }
 
-void red_set_usb_power_mode(uint8_t mode) {
-  bool valid = false;
-  switch (mode) {
-    case USB_POWER_CLIENT:
-      red_set_usb_load_switch(false);
-      valid = true;
-      break;
-    case USB_POWER_CDP:
-      red_set_usb_load_switch(true);
-      valid = true;
-      break;
-    default:
-      break;
-  }
-  if (valid) {
-    usb_power_mode = mode;
-  }
-}
-
 void red_set_can_mode(uint8_t mode) {
   switch (mode) {
     case CAN_MODE_NORMAL:
@@ -139,9 +120,6 @@ void red_init(void) {
   // Turn on USB load switch.
   red_set_usb_load_switch(true);
 
-  // Set right power mode
-  red_set_usb_power_mode(USB_POWER_CDP);
-
   // Initialize harness
   harness_init();
 
@@ -181,6 +159,7 @@ const harness_configuration red_harness_config = {
 
 const board board_red = {
   .board_type = "Red",
+  .board_tick = unused_board_tick,
   .harness_config = &red_harness_config,
   .has_gps = false,
   .has_hw_gmlan = false,
@@ -192,10 +171,8 @@ const board board_red = {
   .enable_can_transceiver = red_enable_can_transceiver,
   .enable_can_transceivers = red_enable_can_transceivers,
   .set_led = red_set_led,
-  .set_usb_power_mode = red_set_usb_power_mode,
   .set_gps_mode = unused_set_gps_mode,
   .set_can_mode = red_set_can_mode,
-  .usb_power_mode_tick = unused_usb_power_mode_tick,
   .check_ignition = red_check_ignition,
   .read_current = unused_read_current,
   .set_fan_enabled = unused_set_fan_enabled,
diff --git a/board/boards/uno.h b/board/boards/uno.h
index f5d097fd0..1115c5f8b 100644
--- a/board/boards/uno.h
+++ b/board/boards/uno.h
@@ -56,7 +56,7 @@ void uno_set_gps_load_switch(bool enabled) {
 }
 
 void uno_set_bootkick(bool enabled){
-  if(enabled){
+  if (enabled) {
     set_gpio_output(GPIOB, 14, false);
   } else {
     // We want the pin to be floating, not forced high!
@@ -73,25 +73,6 @@ void uno_set_phone_power(bool enabled){
   set_gpio_output(GPIOB, 4, enabled);
 }
 
-void uno_set_usb_power_mode(uint8_t mode) {
-  bool valid = false;
-  switch (mode) {
-    case USB_POWER_CLIENT:
-      valid = true;
-      break;
-    case USB_POWER_CDP:
-      uno_bootkick();
-      valid = true;
-      break;
-    default:
-      puts("Invalid USB power mode\n");
-      break;
-  }
-  if (valid) {
-    usb_power_mode = mode;
-  }
-}
-
 void uno_set_gps_mode(uint8_t mode) {
   switch (mode) {
     case GPS_DISABLED:
@@ -145,9 +126,11 @@ void uno_set_can_mode(uint8_t mode){
   }
 }
 
-void uno_usb_power_mode_tick(uint32_t uptime){
-  UNUSED(uptime);
-  if(bootkick_timer != 0U){
+void uno_board_tick(bool ignition, bool usb_enum, bool heartbeat_seen) {
+  UNUSED(ignition);
+  UNUSED(usb_enum);
+  UNUSED(heartbeat_seen);
+  if (bootkick_timer != 0U) {
     bootkick_timer--;
   } else {
     uno_set_bootkick(false);
@@ -262,6 +245,7 @@ const harness_configuration uno_harness_config = {
 
 const board board_uno = {
   .board_type = "Uno",
+  .board_tick = uno_board_tick,
   .harness_config = &uno_harness_config,
   .has_gps = true,
   .has_hw_gmlan = false,
@@ -273,10 +257,8 @@ const board board_uno = {
   .enable_can_transceiver = uno_enable_can_transceiver,
   .enable_can_transceivers = uno_enable_can_transceivers,
   .set_led = uno_set_led,
-  .set_usb_power_mode = uno_set_usb_power_mode,
   .set_gps_mode = uno_set_gps_mode,
   .set_can_mode = uno_set_can_mode,
-  .usb_power_mode_tick = uno_usb_power_mode_tick,
   .check_ignition = uno_check_ignition,
   .read_current = unused_read_current,
   .set_fan_enabled = uno_set_fan_enabled,
diff --git a/board/boards/unused_funcs.h b/board/boards/unused_funcs.h
index 540106575..be675d89f 100644
--- a/board/boards/unused_funcs.h
+++ b/board/boards/unused_funcs.h
@@ -2,10 +2,6 @@ void unused_set_gps_mode(uint8_t mode) {
   UNUSED(mode);
 }
 
-void unused_usb_power_mode_tick(uint32_t uptime) {
-  UNUSED(uptime);
-}
-
 void unused_set_ir_power(uint8_t percentage) {
   UNUSED(percentage);
 }
@@ -29,3 +25,9 @@ void unused_set_siren(bool enabled) {
 uint32_t unused_read_current(void) {
   return 0U;
 }
+
+void unused_board_tick(bool ignition, bool usb_enum, bool heartbeat_seen) {
+  UNUSED(ignition);
+  UNUSED(usb_enum);
+  UNUSED(heartbeat_seen);
+}
\ No newline at end of file
diff --git a/board/boards/white.h b/board/boards/white.h
index 58c71a46a..266370afe 100644
--- a/board/boards/white.h
+++ b/board/boards/white.h
@@ -43,7 +43,6 @@ void white_set_led(uint8_t color, bool enabled) {
 }
 
 void white_set_usb_power_mode(uint8_t mode){
-  bool valid_mode = true;
   switch (mode) {
     case USB_POWER_CLIENT:
       // B2,A13: set client mode
@@ -61,14 +60,9 @@ void white_set_usb_power_mode(uint8_t mode){
       set_gpio_output(GPIOA, 13, 0);
       break;
     default:
-      valid_mode = false;
       puts("Invalid usb power mode\n");
       break;
   }
-
-  if (valid_mode) {
-    usb_power_mode = mode;
-  }
 }
 
 void white_set_gps_mode(uint8_t mode) {
@@ -243,6 +237,7 @@ const harness_configuration white_harness_config = {
 
 const board board_white = {
   .board_type = "White",
+  .board_tick = unused_board_tick,
   .harness_config = &white_harness_config,
   .has_gps = false,
   .has_hw_gmlan = true,
@@ -254,10 +249,8 @@ const board board_white = {
   .enable_can_transceiver = white_enable_can_transceiver,
   .enable_can_transceivers = white_enable_can_transceivers,
   .set_led = white_set_led,
-  .set_usb_power_mode = white_set_usb_power_mode,
   .set_gps_mode = white_set_gps_mode,
   .set_can_mode = white_set_can_mode,
-  .usb_power_mode_tick = unused_usb_power_mode_tick,
   .check_ignition = white_check_ignition,
   .read_current = white_read_current,
   .set_fan_enabled = unused_set_fan_enabled,
diff --git a/board/health.h b/board/health.h
index 3c7d14422..084c03a42 100644
--- a/board/health.h
+++ b/board/health.h
@@ -1,5 +1,7 @@
 // When changing this struct, python/__init__.py needs to be kept up to date!
-#define HEALTH_PACKET_VERSION 8
+
+#define HEALTH_PACKET_VERSION 9
+
 struct __attribute__((packed)) health_t {
   uint32_t uptime_pkt;
   uint32_t voltage_pkt;
@@ -14,7 +16,6 @@ struct __attribute__((packed)) health_t {
   uint8_t controls_allowed_pkt;
   uint8_t gas_interceptor_detected_pkt;
   uint8_t car_harness_status_pkt;
-  uint8_t usb_power_mode_pkt;
   uint8_t safety_mode_pkt;
   uint16_t safety_param_pkt;
   uint8_t fault_status_pkt;
diff --git a/board/main.c b/board/main.c
index 7d67119b0..29a3ff8a4 100644
--- a/board/main.c
+++ b/board/main.c
@@ -51,20 +51,6 @@ void debug_ring_callback(uart_ring *ring) {
     if (rcv == 'x') {
       NVIC_SystemReset();
     }
-
-    // enable CDP mode
-    if (rcv == 'C') {
-      puts("switching USB to CDP mode\n");
-      current_board->set_usb_power_mode(USB_POWER_CDP);
-    }
-    if (rcv == 'c') {
-      puts("switching USB to client mode\n");
-      current_board->set_usb_power_mode(USB_POWER_CLIENT);
-    }
-    if (rcv == 'D') {
-      puts("switching USB to DCP mode\n");
-      current_board->set_usb_power_mode(USB_POWER_DCP);
-    }
   }
 }
 
@@ -158,15 +144,13 @@ void tick_handler(void) {
     // siren
     current_board->set_siren((loop_counter & 1U) && (siren_enabled || (siren_countdown > 0U)));
 
-    // tick drivers
+    // tick drivers at 8Hz
     fan_tick();
 
     // decimated to 1Hz
     if (loop_counter == 0U) {
       can_live = pending_can_live;
 
-      current_board->usb_power_mode_tick(uptime_cnt);
-
       //puth(usart1_dma); puts(" "); puth(DMA2_Stream5->M0AR); puts(" "); puth(DMA2_Stream5->NDTR); puts("\n");
 
       // reset this every 16th pass
@@ -188,6 +172,10 @@ void tick_handler(void) {
       // unless we are in power saving mode
       current_board->set_led(LED_BLUE, (uptime_cnt & 1U) && (power_save_status == POWER_SAVE_STATUS_ENABLED));
 
+      // tick drivers at 1Hz
+      const bool recent_heartbeat = heartbeat_counter == 0U;
+      current_board->board_tick(check_started(), usb_enumerated, recent_heartbeat);
+
       // increase heartbeat counter and cap it at the uint32 limit
       if (heartbeat_counter < __UINT32_MAX__) {
         heartbeat_counter += 1U;
@@ -254,11 +242,6 @@ void tick_handler(void) {
             fan_set_power(0U);
           }
         }
-
-        // enter CDP mode when car starts to ensure we are charging a turned off EON
-        if (check_started() && ((usb_power_mode != USB_POWER_CDP) || !usb_enumerated)) {
-          current_board->set_usb_power_mode(USB_POWER_CDP);
-        }
       }
 
       // check registers
@@ -289,7 +272,6 @@ void EXTI_IRQ_Handler(void) {
     exti_irq_clear();
     clock_init();
 
-    current_board->set_usb_power_mode(USB_POWER_CDP);
     set_power_save_state(POWER_SAVE_STATUS_DISABLED);
     deepsleep_allowed = false;
     heartbeat_counter = 0U;
@@ -399,19 +381,17 @@ int main(void) {
   for (cnt=0;;cnt++) {
     if (power_save_status == POWER_SAVE_STATUS_DISABLED) {
       #ifdef DEBUG_FAULTS
-      if(fault_status == FAULT_STATUS_NONE){
+      if (fault_status == FAULT_STATUS_NONE) {
       #endif
-        uint32_t div_mode = ((usb_power_mode == USB_POWER_DCP) ? 4U : 1U);
-
         // useful for debugging, fade breaks = panda is overloaded
-        for(uint32_t fade = 0U; fade < MAX_LED_FADE; fade += div_mode){
+        for (uint32_t fade = 0U; fade < MAX_LED_FADE; fade += 1U) {
           current_board->set_led(LED_RED, true);
           delay(fade >> 4);
           current_board->set_led(LED_RED, false);
           delay((MAX_LED_FADE - fade) >> 4);
         }
 
-        for(uint32_t fade = MAX_LED_FADE; fade > 0U; fade -= div_mode){
+        for (uint32_t fade = MAX_LED_FADE; fade > 0U; fade -= 1U) {
           current_board->set_led(LED_RED, true);
           delay(fade >> 4);
           current_board->set_led(LED_RED, false);
@@ -430,7 +410,6 @@ int main(void) {
       if (deepsleep_allowed && !usb_enumerated && !check_started() && ignition_seen && (heartbeat_counter > 20U)) {
         usb_soft_disconnect(true);
         fan_set_power(0U);
-        current_board->set_usb_power_mode(USB_POWER_CLIENT);
         NVIC_DisableIRQ(TICK_TIMER_IRQ);
         delay(512000U);
 
diff --git a/board/main_comms.h b/board/main_comms.h
index 1f4914a87..770c3daaf 100644
--- a/board/main_comms.h
+++ b/board/main_comms.h
@@ -25,7 +25,6 @@ int get_health_pkt(void *dat) {
   health->can_fwd_errs_pkt = can_fwd_errs;
   health->gmlan_send_errs_pkt = gmlan_send_errs;
   health->car_harness_status_pkt = car_harness_status;
-  health->usb_power_mode_pkt = usb_power_mode;
   health->safety_mode_pkt = (uint8_t)(current_safety_mode);
   health->safety_param_pkt = current_safety_param;
   health->alternative_experience_pkt = alternative_experience;
@@ -459,10 +458,6 @@ int comms_control_handler(ControlPacket_t *req, uint8_t *resp) {
       can_loopback = (req->param1 > 0U);
       can_init_all();
       break;
-    // **** 0xe6: set USB power
-    case 0xe6:
-      current_board->set_usb_power_mode(req->param1);
-      break;
     // **** 0xe7: set power save state
     case 0xe7:
       set_power_save_state(req->param1);
diff --git a/python/__init__.py b/python/__init__.py
index 2b4e701d7..d1cec35ba 100644
--- a/python/__init__.py
+++ b/python/__init__.py
@@ -174,8 +174,8 @@ class Panda:
   HW_TYPE_RED_PANDA = b'\x07'
 
   CAN_PACKET_VERSION = 2
-  HEALTH_PACKET_VERSION = 8
-  HEALTH_STRUCT = struct.Struct("<IIIIIIIIBBBBBBBHBBBHIfB")
+  HEALTH_PACKET_VERSION = 9
+  HEALTH_STRUCT = struct.Struct("<IIIIIIIIBBBBBBHBBBHIfB")
 
   F2_DEVICES = (HW_TYPE_PEDAL, )
   F4_DEVICES = (HW_TYPE_WHITE_PANDA, HW_TYPE_GREY_PANDA, HW_TYPE_BLACK_PANDA, HW_TYPE_UNO, HW_TYPE_DOS)
@@ -448,16 +448,15 @@ class Panda:
       "controls_allowed": a[10],
       "gas_interceptor_detected": a[11],
       "car_harness_status": a[12],
-      "usb_power_mode": a[13],
-      "safety_mode": a[14],
-      "safety_param": a[15],
-      "fault_status": a[16],
-      "power_save_enabled": a[17],
-      "heartbeat_lost": a[18],
-      "alternative_experience": a[19],
-      "blocked_msg_cnt": a[20],
-      "interrupt_load": a[21],
-      "fan_power": a[22],
+      "safety_mode": a[13],
+      "safety_param": a[14],
+      "fault_status": a[15],
+      "power_save_enabled": a[16],
+      "heartbeat_lost": a[17],
+      "alternative_experience": a[18],
+      "blocked_msg_cnt": a[19],
+      "interrupt_load": a[20],
+      "fan_power": a[21],
     }
 
   # ******************* control *******************
diff --git a/tests/misra/test_misra.sh b/tests/misra/test_misra.sh
index b3bb2ca0a..b9d298c23 100755
--- a/tests/misra/test_misra.sh
+++ b/tests/misra/test_misra.sh
@@ -26,7 +26,7 @@ fi
 
 printf "\nPANDA F4 CODE\n"
 $CPPCHECK -DPANDA -DSTM32F4 -UPEDAL -DCAN3 -DUID_BASE \
-          --suppressions-list=suppressions.txt --suppress=*:*inc/* \
+          --suppressions-list=$DIR/suppressions.txt --suppress=*:*inc/* \
           -I $PANDA_DIR/board/ --dump --enable=all --inline-suppr --force \
           $PANDA_DIR/board/main.c 2>/tmp/misra/cppcheck_f4_output.txt
 
@@ -39,7 +39,7 @@ misra_f4_output=$( cat /tmp/misra/misra_f4_output.txt | grep -v ": information:
 
 printf "\nPANDA H7 CODE\n"
 $CPPCHECK -DPANDA -DSTM32H7 -UPEDAL -DUID_BASE \
-          --suppressions-list=suppressions.txt --suppress=*:*inc/* \
+          --suppressions-list=$DIR/suppressions.txt --suppress=*:*inc/* \
           -I $PANDA_DIR/board/ --dump --enable=all --inline-suppr --force \
           $PANDA_DIR/board/main.c 2>/tmp/misra/cppcheck_h7_output.txt
 
@@ -52,7 +52,7 @@ misra_h7_output=$( cat /tmp/misra/misra_h7_output.txt | grep -v ": information:
 
 printf "\nPEDAL CODE\n"
 $CPPCHECK -UPANDA -DSTM32F2 -DPEDAL -UCAN3 \
-          --suppressions-list=suppressions.txt --suppress=*:*inc/* \
+          --suppressions-list=$DIR/suppressions.txt --suppress=*:*inc/* \
           -I $PANDA_DIR/board/ --dump --enable=all --inline-suppr --force \
           $PANDA_DIR/board/pedal/main.c 2>/tmp/misra/cppcheck_pedal_output.txt