mawei
/
neo
mirror of https://github.com/commaai/neo.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

fixing typos

This commit is contained in:
edsammy 2016-12-09 17:33:52 -08:00
parent 1d1fd6f99a
commit b7ffb026af
1 changed files with 0 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
guide.pdf
View File

@ -26,7 +26,7 @@ research platform
7. leave the rest as undefined then click
8. this bom includes spares of various components and should cost
8. this bom includes spares of various components
board
@ -55,7 +55,7 @@ cables
5. repeat for the remaining three files (you can only upload one at a time)
6. hover over “MAKE” on the top menu bar and then click “My Models”
7. select the material and finish of the 4 prints (we recommend “Black Strong & Flecible”)
7. select the material and finish of the 4 prints (we recommend “Black Strong & Flexible”)
and then click “ADD TO CART”
@ -67,7 +67,7 @@ cables
3. go to mcmaster.com and click “BUILD ORDER” in the upper right corner
4. click “Paste products and quantities” then paste the previously copied text
5. click add and all the neccessary hardware will be added to your cart
5. click add and all the necessary hardware will be added to your cart
, 5
electronics
@ -184,7 +184,7 @@ U2 J3
9. solder J2 onto the back of the board with the notch on the right (see image
below), this is the connector for the fan
10. solder J3 onto the back of the board, make sure it remains level with the board so
that the otg usb cable will lay flat when connected
that the OTG USB cable will lay flat when connected
11. solder J4 onto the back of the board, make sure the plastic legs are fully snapped
into their holes, this is the breakout to the research vehicle
12. J5 is used externally from the board, put it aside for later
@ -256,8 +256,8 @@ U2 J3
connector into the OnePlus3
4. plug the rj45 connector into the board and hold down SW1 while you plug the
breakout cable into the car (or 12V adapter), this puts the microcontroller into
DFU mode
breakout cable into the vehicle (or 12V adapter), this puts the microcontroller
into DFU mode
5. the OnePlus3 will upload the firmware to the microcrontroller, if the red LED
on the board begins to flash then your board is working properly
6. if you have any issues or submit an issue request at
@ -271,7 +271,7 @@ U2 J3
5 4
, 16
, 16
case
assembly
@ -307,7 +307,7 @@ blower fan (H1) heatsinks (H2-5)
assembled pcb
1x
usb otg cable
USB OTG cable
1x
@ -382,7 +382,7 @@ blower fan (H1) heatsinks (H2-5)
snake the cable through the channel in the bottom of the case
and plug the usb c connector into the OnePlus3 (this may take
and plug the USB C connector into the OnePlus3 (this may take
, a few tries)