History

Jason Wen 9f28d9bc44 sunnypilot v2024.04.30-1666 version: sunnypilot v0.9.7.0 release date: 2024-04-30T20:59:55 master commit: 9caf2b5c10e73cfb1df27bf68c48023f3779e594		2024-04-30 20:59:55 +00:00
..
README.md	sunnypilot v2024.04.30-1666	2024-04-30 20:59:55 +00:00
joystickd.py	sunnypilot v2024.04.30-1666	2024-04-30 20:59:55 +00:00

README.md

Joystick

Hardware needed: device running openpilot, laptop, joystick (optional)

With joystickd, you can connect your laptop to your comma device over the network and debug controls using a joystick or keyboard. joystickd uses inputs which supports many common gamepads and joysticks.

Usage

The car must be off, and openpilot must be offroad before starting joystickd.

Using a keyboard

SSH into your comma device and start joystickd with the following command:

tools/joystick/joystickd.py --keyboard

The available buttons and axes will print showing their key mappings. In general, the WASD keys control gas and brakes and steering torque in 5% increments.

Joystick on your comma three

Plug the joystick into your comma three aux USB-C port. Then, SSH into the device and start joystickd.py.

Joystick on your laptop

In order to use a joystick over the network, we need to run joystickd locally from your laptop and have it send testJoystick packets over the network to the comma device.

Connect a joystick to your PC.
Connect your laptop to your comma device's hotspot and open a new SSH shell. Since joystickd is being run on your laptop, we need to write a parameter to let controlsd know to start in joystick debug mode:
```
# on your comma device
echo -n "1" > /data/params/d/JoystickDebugMode
```
Run bridge with your laptop's IP address. This republishes the testJoystick packets sent from your laptop so that openpilot can receive them:
```
# on your comma device
cereal/messaging/bridge {LAPTOP_IP} testJoystick
```

Start joystickd on your laptop in ZMQ mode.

# on your laptop
export ZMQ=1
tools/joystick/joystickd.py

Now start your car and openpilot should go into joystick mode with an alert on startup! The status of the axes will display on the alert, while button statuses print in the shell.

Make sure the conditions are met in the panda to allow controls (e.g. cruise control engaged). You can also make a modification to the panda code to always allow controls.