panda/board
Adeeb Shihadeh f48e9890e6 Toyota: AEB safety 2024-09-12 16:32:35 -07:00
..
boards cuatro LED (#2005) 2024-08-30 15:35:50 +02:00
debug update bash scripts to #!/usr/bin/env bash (#1987) 2024-08-26 17:25:15 -07:00
drivers drivers: log can core reset when switching multiplexing (#1972) 2024-08-26 17:56:46 -07:00
jungle deprecate busTime (#1989) 2024-07-30 21:20:48 -07:00
obj Revert commits that broke USB for openpilot. 2017-07-12 11:27:16 -07:00
safety Toyota: AEB safety 2024-09-12 16:32:35 -07:00
stm32f4 Separate F4 and H7 includes (#1955) 2024-05-26 13:12:25 -07:00
stm32h7 Cuatro fan (#1999) 2024-08-18 17:43:27 -07:00
README.md Docs update (#1769) 2023-12-10 11:14:53 -08:00
SConscript Detect H723 in firmware (#1988) 2024-08-02 11:26:16 -07:00
__init__.py Revert commits that broke USB for openpilot. 2017-07-12 11:27:16 -07:00
bootstub.c (almost) enable cppcheck unusedFunction (#1875) 2024-02-17 14:16:15 -08:00
bootstub_declarations.h enable misra-c2012-11.8 (#1916) 2024-03-24 12:38:25 -07:00
can_comms.h Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
can_definitions.h remove rest of gmlan (#1908) 2024-03-21 13:56:36 -07:00
comms_definitions.h enable misra-constParameterPointer (#1826) 2024-01-20 21:50:42 -08:00
config.h remove unused deepsleep stuff (#1914) 2024-03-22 14:48:49 -07:00
crc.h enable misra-constParameterPointer (#1826) 2024-01-20 21:50:42 -08:00
critical.h Revert "Revert "Register readback on most modules. Still need to convert the other ones (#396)"" 2019-12-05 14:19:29 -08:00
dfu_util_f4.sh DFU flasher: permissions and address 2022-08-25 10:24:25 -07:00
dfu_util_h7.sh flashing: unify recover.sh (#1043) 2022-08-24 19:15:25 -07:00
early_init.h Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
fake_stm.h Remove flash logging (#1674) 2023-09-30 12:49:46 -07:00
faults.h remove rest of gmlan (#1908) 2024-03-21 13:56:36 -07:00
flash.py exit flashing scripts with error if no pandas 2024-03-21 13:04:45 -07:00
flasher.h (almost) enable cppcheck unusedFunction (#1875) 2024-02-17 14:16:15 -08:00
gdb.sh update bash scripts to #!/usr/bin/env bash (#1987) 2024-08-26 17:25:15 -07:00
health.h remove rest of gmlan (#1908) 2024-03-21 13:56:36 -07:00
libc.h add assert_fatal function (#1976) 2024-06-26 16:59:08 -07:00
main.c drivers: log can core reset when switching multiplexing (#1972) 2024-08-26 17:56:46 -07:00
main_comms.h remove unused deepsleep stuff (#1914) 2024-03-22 14:48:49 -07:00
main_declarations.h enable misra-c2012-11.8 (#1916) 2024-03-24 12:38:25 -07:00
power_saving.h remove HW GMLAN support (#1848) 2024-02-03 23:18:33 -08:00
provision.h Cppcheck 2.14 (#1951) 2024-05-27 21:21:13 -07:00
recover.py exit flashing scripts with error if no pandas 2024-03-21 13:04:45 -07:00
safety.h remove comma pedal (#1902) 2024-03-17 22:22:46 -07:00
safety_declarations.h Enable misra-c2012-1.2 (#1962) 2024-05-30 22:13:47 -07:00
utils.h Enable misra-c2012-1.2 (#1962) 2024-05-30 22:13:47 -07:00

README.md

Programming

./flash.py        # flash application
./recover.py      # flash bootstub

Debugging

To print out the serial console from the STM32, run tests/debug_console.py

Troubleshooting

If your panda will not flash and green LED is on, use recover.py. If panda is blinking fast with green LED, use flash.py.

Otherwise if LED is off and panda can't be seen with lsusb command, use panda paw to go into DFU mode.

If your device has an internal panda and none of the above works, try running ../tests/reflash_internal_panda.py.