mirror of https://github.com/commaai/panda.git
44 lines
1.4 KiB
C
44 lines
1.4 KiB
C
// BUS 0 is on the LKAS module (ASCM) side
|
|
// BUS 2 is on the actuator (EPS) side
|
|
|
|
static int gm_ascm_fwd_hook(int bus_num, CAN_FIFOMailBox_TypeDef *to_fwd) {
|
|
|
|
int bus_fwd = -1;
|
|
|
|
if (bus_num == 0) {
|
|
int addr = GET_ADDR(to_fwd);
|
|
bus_fwd = 2;
|
|
// do not propagate lkas messages from ascm to actuators, unless supercruise is on
|
|
// block 0x152 and 0x154, which are the lkas command from ASCM1 and ASCM2
|
|
// block 0x315 and 0x2cb, which are the brake and accel commands from ASCM1
|
|
//if ((addr == 0x152) || (addr == 0x154) || (addr == 0x315) || (addr == 0x2cb)) {
|
|
if ((addr == 0x152) || (addr == 0x154)) {
|
|
bool supercruise_on = (GET_BYTE(to_fwd, 4) & 0x10) != 0; // bit 36
|
|
if (!supercruise_on) {
|
|
bus_fwd = -1;
|
|
}
|
|
}
|
|
if ((addr == 0x151) || (addr == 0x153) || (addr == 0x314)) {
|
|
// on the chassis bus, the OBDII port is on the module side, so we need to read
|
|
// the lkas messages sent by openpilot (put on unused 0x151 ane 0x153 addrs) and send it to
|
|
// the actuator as 0x152 and 0x154
|
|
uint32_t fwd_addr = addr + 1;
|
|
to_fwd->RIR = (fwd_addr << 21) | (to_fwd->RIR & 0x1fffff);
|
|
}
|
|
}
|
|
|
|
if (bus_num == 2) {
|
|
bus_fwd = 0;
|
|
}
|
|
|
|
return bus_fwd;
|
|
}
|
|
|
|
const safety_hooks gm_ascm_hooks = {
|
|
.init = nooutput_init,
|
|
.rx = default_rx_hook,
|
|
.tx = alloutput_tx_hook,
|
|
.tx_lin = nooutput_tx_lin_hook,
|
|
.fwd = gm_ascm_fwd_hook,
|
|
};
|