commaai
/
panda
mirror of https://github.com/commaai/panda.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
panda/board/usb.h

632 lines
18 KiB
C
Raw Blame History

// **** supporting defines ****
typedef struct
{
__IO uint32_t HPRT;
}
USB_OTG_HostPortTypeDef;
USB_OTG_GlobalTypeDef *USBx = USB_OTG_FS;
#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t)USBx + USB_OTG_HOST_BASE))
#define USBx_HOST_PORT ((USB_OTG_HostPortTypeDef *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE))
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t)USBx + USB_OTG_DEVICE_BASE))
#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_DESC_TYPE_DEVICE 1
#define USB_DESC_TYPE_CONFIGURATION 2
#define USB_DESC_TYPE_STRING 3
#define USB_DESC_TYPE_INTERFACE 4
#define USB_DESC_TYPE_ENDPOINT 5
#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
#define STS_GOUT_NAK 1
#define STS_DATA_UPDT 2
#define STS_XFER_COMP 3
#define STS_SETUP_COMP 4
#define STS_SETUP_UPDT 6
#define USBD_FS_TRDT_VALUE 5
#define USB_OTG_SPEED_FULL 3
// interfaces
void usb_cb_enumeration_complete();
void usb_cb_control_msg();
void usb_cb_ep1_in(int len);
void usb_cb_ep2_out(uint8_t *usbdata, int len);
void usb_cb_ep3_out(uint8_t *usbdata, int len);
uint8_t device_desc[] = {
0x12,0x01,0x00,0x01,
0xFF,0xFF,0xFF,0x40,
(USB_VID>>0)&0xFF,(USB_VID>>8)&0xFF,
(USB_PID>>0)&0xFF,(USB_PID>>8)&0xFF,
#ifdef STM32F4
0x00,0x23,
#else
0x00,0x22,
#endif
0x01,0x02,
0x03,0x01};
uint8_t configuration_desc[] = {
0x09, 0x02, 0x27, 0x00,
0x01, 0x01, 0x00, 0xc0,
0x32,
// interface 0
0x09, 0x04, 0x00, 0x00,
0x03, 0xff, 0xFF, 0xFF,
0x00,
// endpoint 1, read CAN
0x07, 0x05, 0x81, 0x02, 0x40, 0x00, 0x00,
// endpoint 2, send serial
0x07, 0x05, 0x02, 0x02, 0x40, 0x00, 0x00,
// endpoint 3, send CAN
0x07, 0x05, 0x03, 0x02, 0x40, 0x00, 0x00,
};
uint8_t string_0_desc[] = {
0x04, 0x03, 0x09, 0x04
};
uint16_t string_1_desc[] = {
0x0312,
'c', 'o', 'm', 'm', 'a', '.', 'a', 'i'
};
#ifdef PANDA
uint16_t string_2_desc[] = {
0x030c,
'p', 'a', 'n', 'd', 'a'
};
#else
uint16_t string_2_desc[] = {
0x030c,
'N', 'E', 'O', 'v', '1'
};
#endif
uint16_t string_3_desc[] = {
0x030a,
'n', 'o', 'n', 'e'
};
typedef union
{
uint16_t w;
struct BW
{
uint8_t msb;
uint8_t lsb;
}
bw;
}
uint16_t_uint8_t;
typedef union _USB_Setup
{
uint32_t d8[2];
struct _SetupPkt_Struc
{
uint8_t bmRequestType;
uint8_t bRequest;
uint16_t_uint8_t wValue;
uint16_t_uint8_t wIndex;
uint16_t_uint8_t wLength;
} b;
}
USB_Setup_TypeDef;
// current packet
USB_Setup_TypeDef setup;
uint8_t usbdata[0x100];
// packet read and write
void *USB_ReadPacket(void *dest, uint16_t len) {
uint32_t i=0;
uint32_t count32b = (len + 3) / 4;
for ( i = 0; i < count32b; i++, dest += 4 ) {
// packed?
*(__attribute__((__packed__)) uint32_t *)dest = USBx_DFIFO(0);
}
return ((void *)dest);
}
void USB_WritePacket(const uint8_t *src, uint16_t len, uint32_t ep) {
#ifdef DEBUG_USB
puts("writing ");
hexdump(src, len);
#endif
uint32_t count32b = 0, i = 0;
count32b = (len + 3) / 4;
// bullshit
USBx_INEP(ep)->DIEPTSIZ = (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) | (len & USB_OTG_DIEPTSIZ_XFRSIZ);
USBx_INEP(ep)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
// load the FIFO
for (i = 0; i < count32b; i++, src += 4) {
USBx_DFIFO(ep) = *((__attribute__((__packed__)) uint32_t *)src);
}
}
void usb_reset() {
// unmask endpoint interrupts, so many sets
USBx_DEVICE->DAINT = 0xFFFFFFFF;
USBx_DEVICE->DAINTMSK = 0xFFFFFFFF;
//USBx_DEVICE->DOEPMSK = (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
//USBx_DEVICE->DIEPMSK = (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM | USB_OTG_DIEPMSK_ITTXFEMSK);
//USBx_DEVICE->DIEPMSK = (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
// all interrupts for debugging
USBx_DEVICE->DIEPMSK = 0xFFFFFFFF;
USBx_DEVICE->DOEPMSK = 0xFFFFFFFF;
// clear interrupts
USBx_INEP(0)->DIEPINT = 0xFF;
USBx_OUTEP(0)->DOEPINT = 0xFF;
// unset the address
USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
// set up USB FIFOs
// RX start address is fixed to 0
USBx->GRXFSIZ = 0x40;
// 0x100 to offset past GRXFSIZ
USBx->DIEPTXF0_HNPTXFSIZ = (0x40 << 16) | 0x40;
// EP1, massive
USBx->DIEPTXF[0] = (0x40 << 16) | 0x80;
// flush TX fifo
USBx->GRSTCTL = USB_OTG_GRSTCTL_TXFFLSH | USB_OTG_GRSTCTL_TXFNUM_4;
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
// flush RX FIFO
USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
// no global NAK
USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
// ready to receive setup packets
USBx_OUTEP(0)->DOEPTSIZ = USB_OTG_DOEPTSIZ_STUPCNT | (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) | (3 * 8);
}
char to_hex_char(int a) {
if (a < 10) {
return '0' + a;
} else {
return 'a' + (a-10);
}
}
void usb_setup() {
int i;
uint8_t resp[0x80];
// setup packet is ready
switch (setup.b.bRequest) {
case USB_REQ_SET_CONFIGURATION:
// enable other endpoints, has to be here?
USBx_INEP(1)->DIEPCTL = (0x40 & USB_OTG_DIEPCTL_MPSIZ) | (2 << 18) | (1 << 22) |
USB_OTG_DIEPCTL_SD0PID_SEVNFRM | USB_OTG_DIEPCTL_USBAEP;
USBx_INEP(1)->DIEPINT = 0xFF;
USBx_OUTEP(2)->DOEPTSIZ = (1 << 19) | 0x40;
USBx_OUTEP(2)->DOEPCTL = (0x40 & USB_OTG_DOEPCTL_MPSIZ) | (2 << 18) |
USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_USBAEP;
USBx_OUTEP(2)->DOEPINT = 0xFF;
USBx_OUTEP(3)->DOEPTSIZ = (1 << 19) | 0x40;
USBx_OUTEP(3)->DOEPCTL = (0x40 & USB_OTG_DOEPCTL_MPSIZ) | (2 << 18) |
USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_USBAEP;
USBx_OUTEP(3)->DOEPINT = 0xFF;
// mark ready to receive
USBx_OUTEP(2)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
USBx_OUTEP(3)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
// TODO: is this the right place for this?
usb_cb_enumeration_complete();
USB_WritePacket(0, 0, 0);
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
break;
case USB_REQ_SET_ADDRESS:
// set now?
USBx_DEVICE->DCFG |= ((setup.b.wValue.w & 0x7f) << 4);
#ifdef DEBUG_USB
puts(" set address\n");
#endif
USB_WritePacket(0, 0, 0);
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
break;
case USB_REQ_GET_DESCRIPTOR:
switch (setup.b.wValue.bw.lsb) {
case USB_DESC_TYPE_DEVICE:
//puts(" writing device descriptor\n");
// setup transfer
USB_WritePacket(device_desc, min(sizeof(device_desc), setup.b.wLength.w), 0);
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
//puts("D");
break;
case USB_DESC_TYPE_CONFIGURATION:
USB_WritePacket(configuration_desc, min(sizeof(configuration_desc), setup.b.wLength.w), 0);
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
break;
case USB_DESC_TYPE_STRING:
switch (setup.b.wValue.bw.msb) {
case 0:
USB_WritePacket(string_0_desc, min(sizeof(string_0_desc), setup.b.wLength.w), 0);
break;
case 1:
USB_WritePacket(string_1_desc, min(sizeof(string_1_desc), setup.b.wLength.w), 0);
break;
case 2:
USB_WritePacket(string_2_desc, min(sizeof(string_2_desc), setup.b.wLength.w), 0);
break;
case 3:
#ifdef PANDA
resp[0] = 0x02 + 12*4;
resp[1] = 0x03;
// 96 bits = 12 bytes
for (i = 0; i < 12; i++){
uint8_t cc = ((uint8_t *)UID_BASE)[i];
resp[2 + i*4 + 0] = to_hex_char((cc>>4)&0xF);
resp[2 + i*4 + 1] = '\0';
resp[2 + i*4 + 2] = to_hex_char((cc>>0)&0xF);
resp[2 + i*4 + 3] = '\0';
}
USB_WritePacket(resp, min(resp[0], setup.b.wLength.w), 0);
#else
USB_WritePacket(string_3_desc, min(sizeof(string_3_desc), setup.b.wLength.w), 0);
#endif
break;
default:
// nothing
USB_WritePacket(0, 0, 0);
break;
}
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
break;
default:
// nothing here?
USB_WritePacket(0, 0, 0);
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
break;
}
break;
case USB_REQ_GET_STATUS:
// empty resp?
resp[0] = 0;
resp[1] = 0;
USB_WritePacket((void*)&resp, 2, 0);
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
break;
default:
usb_cb_control_msg();
}
}
void usb_init() {
// full speed PHY, do reset and remove power down
puth(USBx->GRSTCTL);
puts(" resetting PHY\n");
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
puts("AHB idle\n");
// reset PHY here
USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
puts("reset done\n");
// internal PHY, force device mode
USBx->GUSBCFG = USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_FDMOD;
// slowest timings
USBx->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
// power up the PHY
#ifdef STM32F4
USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
//USBx->GCCFG |= USB_OTG_GCCFG_VBDEN | USB_OTG_GCCFG_SDEN |USB_OTG_GCCFG_PDEN | USB_OTG_GCCFG_DCDEN;
/* B-peripheral session valid override enable*/
USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
#else
USBx->GCCFG = USB_OTG_GCCFG_PWRDWN | USB_OTG_GCCFG_NOVBUSSENS;
#endif
// be a device, slowest timings
//USBx->GUSBCFG = USB_OTG_GUSBCFG_FDMOD | USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_TRDT | USB_OTG_GUSBCFG_TOCAL;
//USBx->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
//USBx->GUSBCFG = USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_TRDT | USB_OTG_GUSBCFG_TOCAL;
// **** for debugging, doesn't seem to work ****
//USBx->GUSBCFG |= USB_OTG_GUSBCFG_CTXPKT;
// reset PHY clock
USBx_PCGCCTL = 0;
// enable the fancy OTG things
// DCFG_FRAME_INTERVAL_80 is 0
//USBx->GUSBCFG |= USB_OTG_GUSBCFG_HNPCAP | USB_OTG_GUSBCFG_SRPCAP;
USBx_DEVICE->DCFG |= USB_OTG_SPEED_FULL | USB_OTG_DCFG_NZLSOHSK;
//USBx_DEVICE->DCFG = USB_OTG_DCFG_NZLSOHSK | USB_OTG_DCFG_DSPD;
//USBx_DEVICE->DCFG = USB_OTG_DCFG_DSPD;
// clear pending interrupts
USBx->GINTSTS = 0xBFFFFFFFU;
// setup USB interrupts
// all interrupts except TXFIFO EMPTY
//USBx->GINTMSK = 0xFFFFFFFF & ~(USB_OTG_GINTMSK_NPTXFEM | USB_OTG_GINTMSK_PTXFEM | USB_OTG_GINTSTS_SOF | USB_OTG_GINTSTS_EOPF);
//USBx->GINTMSK = 0xFFFFFFFF & ~(USB_OTG_GINTMSK_NPTXFEM | USB_OTG_GINTMSK_PTXFEM);
USBx->GINTMSK = USB_OTG_GINTMSK_USBRST | USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_OTGINT |
USB_OTG_GINTMSK_RXFLVLM | USB_OTG_GINTMSK_GONAKEFFM | USB_OTG_GINTMSK_GINAKEFFM |
USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IEPINT | USB_OTG_GINTMSK_USBSUSPM |
USB_OTG_GINTMSK_CIDSCHGM | USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_MMISM;
USBx->GAHBCFG = USB_OTG_GAHBCFG_GINT;
// DCTL startup value is 2 on new chip, 0 on old chip
// THIS IS FUCKING BULLSHIT
USBx_DEVICE->DCTL = 0;
}
// ***************************** USB port *****************************
void usb_irqhandler(void) {
//USBx->GINTMSK = 0;
unsigned int gintsts = USBx->GINTSTS;
unsigned int gotgint = USBx->GOTGINT;
unsigned int daint = USBx_DEVICE->DAINT;
// gintsts SUSPEND? 04008428
#ifdef DEBUG_USB
puth(gintsts);
puts(" ");
/*puth(USBx->GCCFG);
puts(" ");*/
puth(gotgint);
puts(" ep ");
puth(daint);
puts(" USB interrupt!\n");
#endif
if (gintsts & USB_OTG_GINTSTS_CIDSCHG) {
puts("connector ID status change\n");
}
if (gintsts & USB_OTG_GINTSTS_ESUSP) {
puts("ESUSP detected\n");
}
if (gintsts & USB_OTG_GINTSTS_USBRST) {
puts("USB reset\n");
usb_reset();
}
if (gintsts & USB_OTG_GINTSTS_ENUMDNE) {
puts("enumeration done ");
// Full speed, ENUMSPD
puth(USBx_DEVICE->DSTS);
puts("\n");
}
if (gintsts & USB_OTG_GINTSTS_OTGINT) {
puts("OTG int:");
puth(USBx->GOTGINT);
puts("\n");
// getting ADTOCHG
//USBx->GOTGINT = USBx->GOTGINT;
}
// RX FIFO first
if (gintsts & USB_OTG_GINTSTS_RXFLVL) {
// 1. Read the Receive status pop register
volatile unsigned int rxst = USBx->GRXSTSP;
#ifdef DEBUG_USB
puts(" RX FIFO:");
puth(rxst);
puts(" status: ");
puth((rxst & USB_OTG_GRXSTSP_PKTSTS) >> 17);
puts(" len: ");
puth((rxst & USB_OTG_GRXSTSP_BCNT) >> 4);
puts("\n");
#endif
if (((rxst & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) {
int endpoint = (rxst & USB_OTG_GRXSTSP_EPNUM);
int len = (rxst & USB_OTG_GRXSTSP_BCNT) >> 4;
USB_ReadPacket(&usbdata, len);
#ifdef DEBUG_USB
puts(" data ");
puth(len);
puts("\n");
hexdump(&usbdata, len);
#endif
if (endpoint == 2) {
usb_cb_ep2_out(usbdata, len);
}
if (endpoint == 3) {
usb_cb_ep3_out(usbdata, len);
}
} else if (((rxst & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) {
USB_ReadPacket(&setup, 8);
#ifdef DEBUG_USB
puts(" setup ");
hexdump(&setup, 8);
puts("\n");
#endif
}
}
/*if (gintsts & USB_OTG_GINTSTS_HPRTINT) {
// host
puts("HPRT:");
puth(USBx_HOST_PORT->HPRT);
puts("\n");
if (USBx_HOST_PORT->HPRT & USB_OTG_HPRT_PCDET) {
USBx_HOST_PORT->HPRT |= USB_OTG_HPRT_PRST;
USBx_HOST_PORT->HPRT |= USB_OTG_HPRT_PCDET;
}
}*/
if ((gintsts & USB_OTG_GINTSTS_BOUTNAKEFF) || (gintsts & USB_OTG_GINTSTS_GINAKEFF)) {
// no global NAK, why is this getting set?
#ifdef DEBUG_USB
puts("GLOBAL NAK\n");
#endif
USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK | USB_OTG_DCTL_CGINAK;
}
if (gintsts & USB_OTG_GINTSTS_SRQINT) {
// we want to do "A-device host negotiation protocol" since we are the A-device
puts("start request\n");
puth(USBx->GOTGCTL);
puts("\n");
//USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
//USBx_HOST_PORT->HPRT = USB_OTG_HPRT_PPWR | USB_OTG_HPRT_PENA;
//USBx->GOTGCTL |= USB_OTG_GOTGCTL_SRQ;
}
// out endpoint hit
if (gintsts & USB_OTG_GINTSTS_OEPINT) {
#ifdef DEBUG_USB
puts(" 0:");
puth(USBx_OUTEP(0)->DOEPINT);
puts(" 2:");
puth(USBx_OUTEP(2)->DOEPINT);
puts(" 3:");
puth(USBx_OUTEP(3)->DOEPINT);
puts(" ");
puth(USBx_OUTEP(3)->DOEPCTL);
puts(" 4:");
puth(USBx_OUTEP(4)->DOEPINT);
puts(" OUT ENDPOINT\n");
#endif
if (USBx_OUTEP(2)->DOEPINT & USB_OTG_DOEPINT_XFRC) {
#ifdef DEBUG_USB
puts(" OUT2 PACKET XFRC\n");
#endif
USBx_OUTEP(2)->DOEPTSIZ = (1 << 19) | 0x40;
USBx_OUTEP(2)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
}
if (USBx_OUTEP(3)->DOEPINT & USB_OTG_DOEPINT_XFRC) {
#ifdef DEBUG_USB
puts(" OUT3 PACKET XFRC\n");
#endif
USBx_OUTEP(3)->DOEPTSIZ = (1 << 19) | 0x40;
USBx_OUTEP(3)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
} else if (USBx_OUTEP(3)->DOEPINT & 0x2000) {
#ifdef DEBUG_USB
puts(" OUT3 PACKET WTF\n");
#endif
// if NAK was set trigger this, unknown interrupt
USBx_OUTEP(3)->DOEPTSIZ = (1 << 19) | 0x40;
USBx_OUTEP(3)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
} else if (USBx_OUTEP(3)->DOEPINT) {
puts("OUTEP3 error ");
puth(USBx_OUTEP(3)->DOEPINT);
puts("\n");
}
if (USBx_OUTEP(0)->DOEPINT & USB_OTG_DIEPINT_XFRC) {
// ready for next packet
USBx_OUTEP(0)->DOEPTSIZ = USB_OTG_DOEPTSIZ_STUPCNT | (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) | (1 * 8);
}
// respond to setup packets
if (USBx_OUTEP(0)->DOEPINT & USB_OTG_DOEPINT_STUP) {
usb_setup();
}
USBx_OUTEP(0)->DOEPINT = USBx_OUTEP(0)->DOEPINT;
USBx_OUTEP(2)->DOEPINT = USBx_OUTEP(2)->DOEPINT;
USBx_OUTEP(3)->DOEPINT = USBx_OUTEP(3)->DOEPINT;
}
// in endpoint hit
if (gintsts & USB_OTG_GINTSTS_IEPINT) {
#ifdef DEBUG_USB
puts(" ");
puth(USBx_INEP(0)->DIEPINT);
puts(" ");
puth(USBx_INEP(1)->DIEPINT);
puts(" IN ENDPOINT\n");
#endif
// this happens first
if (USBx_INEP(1)->DIEPINT & USB_OTG_DIEPINT_XFRC) {
#ifdef DEBUG_USB
puts(" IN PACKET SEND\n");
#endif
//USBx_DEVICE->DIEPEMPMSK = ~(1 << 1);
}
// *** IN token received when TxFIFO is empty
if (USBx_INEP(1)->DIEPINT & USB_OTG_DIEPMSK_ITTXFEMSK) {
#ifdef DEBUG_USB
puts(" IN PACKET QUEUE\n");
#endif
// TODO: always assuming max len, can we get the length?
usb_cb_ep1_in(0x40);
}
// clear interrupts
USBx_INEP(0)->DIEPINT = USBx_INEP(0)->DIEPINT;
USBx_INEP(1)->DIEPINT = USBx_INEP(1)->DIEPINT;
}
// clear all interrupts we handled
USBx_DEVICE->DAINT = daint;
USBx->GOTGINT = gotgint;
USBx->GINTSTS = gintsts;
//USBx->GINTMSK = 0xFFFFFFFF & ~(USB_OTG_GINTMSK_NPTXFEM | USB_OTG_GINTMSK_PTXFEM | USB_OTG_GINTSTS_SOF | USB_OTG_GINTSTS_EOPF);
}
Reference in New Issue View Git Blame Copy Permalink