mirror of https://github.com/commaai/panda.git
93 lines
2.5 KiB
C
93 lines
2.5 KiB
C
#define MODE_INPUT 0
|
|
#define MODE_OUTPUT 1
|
|
#define MODE_ALTERNATE 2
|
|
#define MODE_ANALOG 3
|
|
|
|
#define PULL_NONE 0
|
|
#define PULL_UP 1
|
|
#define PULL_DOWN 2
|
|
|
|
#define OUTPUT_TYPE_PUSH_PULL 0U
|
|
#define OUTPUT_TYPE_OPEN_DRAIN 1U
|
|
|
|
typedef struct {
|
|
GPIO_TypeDef * const bank;
|
|
uint8_t pin;
|
|
} gpio_t;
|
|
|
|
void set_gpio_mode(GPIO_TypeDef *GPIO, unsigned int pin, unsigned int mode) {
|
|
ENTER_CRITICAL();
|
|
uint32_t tmp = GPIO->MODER;
|
|
tmp &= ~(3U << (pin * 2U));
|
|
tmp |= (mode << (pin * 2U));
|
|
register_set(&(GPIO->MODER), tmp, 0xFFFFFFFFU);
|
|
EXIT_CRITICAL();
|
|
}
|
|
|
|
void set_gpio_output(GPIO_TypeDef *GPIO, unsigned int pin, bool enabled) {
|
|
ENTER_CRITICAL();
|
|
if (enabled) {
|
|
register_set_bits(&(GPIO->ODR), (1UL << pin));
|
|
} else {
|
|
register_clear_bits(&(GPIO->ODR), (1UL << pin));
|
|
}
|
|
set_gpio_mode(GPIO, pin, MODE_OUTPUT);
|
|
EXIT_CRITICAL();
|
|
}
|
|
|
|
void set_gpio_output_type(GPIO_TypeDef *GPIO, unsigned int pin, unsigned int output_type){
|
|
ENTER_CRITICAL();
|
|
if(output_type == OUTPUT_TYPE_OPEN_DRAIN) {
|
|
register_set_bits(&(GPIO->OTYPER), (1UL << pin));
|
|
} else {
|
|
register_clear_bits(&(GPIO->OTYPER), (1U << pin));
|
|
}
|
|
EXIT_CRITICAL();
|
|
}
|
|
|
|
void set_gpio_alternate(GPIO_TypeDef *GPIO, unsigned int pin, unsigned int mode) {
|
|
ENTER_CRITICAL();
|
|
uint32_t tmp = GPIO->AFR[pin >> 3U];
|
|
tmp &= ~(0xFU << ((pin & 7U) * 4U));
|
|
tmp |= mode << ((pin & 7U) * 4U);
|
|
register_set(&(GPIO->AFR[pin >> 3]), tmp, 0xFFFFFFFFU);
|
|
set_gpio_mode(GPIO, pin, MODE_ALTERNATE);
|
|
EXIT_CRITICAL();
|
|
}
|
|
|
|
void set_gpio_pullup(GPIO_TypeDef *GPIO, unsigned int pin, unsigned int mode) {
|
|
ENTER_CRITICAL();
|
|
uint32_t tmp = GPIO->PUPDR;
|
|
tmp &= ~(3U << (pin * 2U));
|
|
tmp |= (mode << (pin * 2U));
|
|
register_set(&(GPIO->PUPDR), tmp, 0xFFFFFFFFU);
|
|
EXIT_CRITICAL();
|
|
}
|
|
|
|
int get_gpio_input(const GPIO_TypeDef *GPIO, unsigned int pin) {
|
|
return (GPIO->IDR & (1UL << pin)) == (1UL << pin);
|
|
}
|
|
|
|
void gpio_set_all_output(gpio_t *pins, uint8_t num_pins, bool enabled) {
|
|
for (uint8_t i = 0; i < num_pins; i++) {
|
|
set_gpio_output(pins[i].bank, pins[i].pin, enabled);
|
|
}
|
|
}
|
|
|
|
void gpio_set_bitmask(gpio_t *pins, uint8_t num_pins, uint32_t bitmask) {
|
|
for (uint8_t i = 0; i < num_pins; i++) {
|
|
set_gpio_output(pins[i].bank, pins[i].pin, (bitmask >> i) & 1U);
|
|
}
|
|
}
|
|
|
|
// Detection with internal pullup
|
|
#define PULL_EFFECTIVE_DELAY 4096
|
|
bool detect_with_pull(GPIO_TypeDef *GPIO, int pin, int mode) {
|
|
set_gpio_mode(GPIO, pin, MODE_INPUT);
|
|
set_gpio_pullup(GPIO, pin, mode);
|
|
for (volatile int i=0; i<PULL_EFFECTIVE_DELAY; i++);
|
|
bool ret = get_gpio_input(GPIO, pin);
|
|
set_gpio_pullup(GPIO, pin, PULL_NONE);
|
|
return ret;
|
|
}
|