commaai
/
panda
mirror of https://github.com/commaai/panda.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
panda/python/uds.py

939 lines
38 KiB
Python
Raw Permalink Blame History

import time
import struct
from collections import deque
from typing import NamedTuple, Deque, cast
from collections.abc import Callable, Generator
from enum import IntEnum
from functools import partial
class SERVICE_TYPE(IntEnum):
DIAGNOSTIC_SESSION_CONTROL = 0x10
ECU_RESET = 0x11
SECURITY_ACCESS = 0x27
COMMUNICATION_CONTROL = 0x28
TESTER_PRESENT = 0x3E
ACCESS_TIMING_PARAMETER = 0x83
SECURED_DATA_TRANSMISSION = 0x84
CONTROL_DTC_SETTING = 0x85
RESPONSE_ON_EVENT = 0x86
LINK_CONTROL = 0x87
READ_DATA_BY_IDENTIFIER = 0x22
READ_MEMORY_BY_ADDRESS = 0x23
READ_SCALING_DATA_BY_IDENTIFIER = 0x24
READ_DATA_BY_PERIODIC_IDENTIFIER = 0x2A
DYNAMICALLY_DEFINE_DATA_IDENTIFIER = 0x2C
WRITE_DATA_BY_IDENTIFIER = 0x2E
WRITE_MEMORY_BY_ADDRESS = 0x3D
CLEAR_DIAGNOSTIC_INFORMATION = 0x14
READ_DTC_INFORMATION = 0x19
INPUT_OUTPUT_CONTROL_BY_IDENTIFIER = 0x2F
ROUTINE_CONTROL = 0x31
REQUEST_DOWNLOAD = 0x34
REQUEST_UPLOAD = 0x35
TRANSFER_DATA = 0x36
REQUEST_TRANSFER_EXIT = 0x37
class SESSION_TYPE(IntEnum):
DEFAULT = 1
PROGRAMMING = 2
EXTENDED_DIAGNOSTIC = 3
SAFETY_SYSTEM_DIAGNOSTIC = 4
class RESET_TYPE(IntEnum):
HARD = 1
KEY_OFF_ON = 2
SOFT = 3
ENABLE_RAPID_POWER_SHUTDOWN = 4
DISABLE_RAPID_POWER_SHUTDOWN = 5
class ACCESS_TYPE(IntEnum):
REQUEST_SEED = 1
SEND_KEY = 2
class CONTROL_TYPE(IntEnum):
ENABLE_RX_ENABLE_TX = 0
ENABLE_RX_DISABLE_TX = 1
DISABLE_RX_ENABLE_TX = 2
DISABLE_RX_DISABLE_TX = 3
class MESSAGE_TYPE(IntEnum):
NORMAL = 1
NETWORK_MANAGEMENT = 2
NORMAL_AND_NETWORK_MANAGEMENT = 3
class TIMING_PARAMETER_TYPE(IntEnum):
READ_EXTENDED_SET = 1
SET_TO_DEFAULT_VALUES = 2
READ_CURRENTLY_ACTIVE = 3
SET_TO_GIVEN_VALUES = 4
class DTC_SETTING_TYPE(IntEnum):
ON = 1
OFF = 2
class RESPONSE_EVENT_TYPE(IntEnum):
STOP_RESPONSE_ON_EVENT = 0
ON_DTC_STATUS_CHANGE = 1
ON_TIMER_INTERRUPT = 2
ON_CHANGE_OF_DATA_IDENTIFIER = 3
REPORT_ACTIVATED_EVENTS = 4
START_RESPONSE_ON_EVENT = 5
CLEAR_RESPONSE_ON_EVENT = 6
ON_COMPARISON_OF_VALUES = 7
class LINK_CONTROL_TYPE(IntEnum):
VERIFY_BAUDRATE_TRANSITION_WITH_FIXED_BAUDRATE = 1
VERIFY_BAUDRATE_TRANSITION_WITH_SPECIFIC_BAUDRATE = 2
TRANSITION_BAUDRATE = 3
class BAUD_RATE_TYPE(IntEnum):
PC9600 = 1
PC19200 = 2
PC38400 = 3
PC57600 = 4
PC115200 = 5
CAN125000 = 16
CAN250000 = 17
CAN500000 = 18
CAN1000000 = 19
class DATA_IDENTIFIER_TYPE(IntEnum):
BOOT_SOFTWARE_IDENTIFICATION = 0xF180
APPLICATION_SOFTWARE_IDENTIFICATION = 0xF181
APPLICATION_DATA_IDENTIFICATION = 0xF182
BOOT_SOFTWARE_FINGERPRINT = 0xF183
APPLICATION_SOFTWARE_FINGERPRINT = 0xF184
APPLICATION_DATA_FINGERPRINT = 0xF185
ACTIVE_DIAGNOSTIC_SESSION = 0xF186
VEHICLE_MANUFACTURER_SPARE_PART_NUMBER = 0xF187
VEHICLE_MANUFACTURER_ECU_SOFTWARE_NUMBER = 0xF188
VEHICLE_MANUFACTURER_ECU_SOFTWARE_VERSION_NUMBER = 0xF189
SYSTEM_SUPPLIER_IDENTIFIER = 0xF18A
ECU_MANUFACTURING_DATE = 0xF18B
ECU_SERIAL_NUMBER = 0xF18C
SUPPORTED_FUNCTIONAL_UNITS = 0xF18D
VEHICLE_MANUFACTURER_KIT_ASSEMBLY_PART_NUMBER = 0xF18E
VIN = 0xF190
VEHICLE_MANUFACTURER_ECU_HARDWARE_NUMBER = 0xF191
SYSTEM_SUPPLIER_ECU_HARDWARE_NUMBER = 0xF192
SYSTEM_SUPPLIER_ECU_HARDWARE_VERSION_NUMBER = 0xF193
SYSTEM_SUPPLIER_ECU_SOFTWARE_NUMBER = 0xF194
SYSTEM_SUPPLIER_ECU_SOFTWARE_VERSION_NUMBER = 0xF195
EXHAUST_REGULATION_OR_TYPE_APPROVAL_NUMBER = 0xF196
SYSTEM_NAME_OR_ENGINE_TYPE = 0xF197
REPAIR_SHOP_CODE_OR_TESTER_SERIAL_NUMBER = 0xF198
PROGRAMMING_DATE = 0xF199
CALIBRATION_REPAIR_SHOP_CODE_OR_CALIBRATION_EQUIPMENT_SERIAL_NUMBER = 0xF19A
CALIBRATION_DATE = 0xF19B
CALIBRATION_EQUIPMENT_SOFTWARE_NUMBER = 0xF19C
ECU_INSTALLATION_DATE = 0xF19D
ODX_FILE = 0xF19E
ENTITY = 0xF19F
class TRANSMISSION_MODE_TYPE(IntEnum):
SEND_AT_SLOW_RATE = 1
SEND_AT_MEDIUM_RATE = 2
SEND_AT_FAST_RATE = 3
STOP_SENDING = 4
class DYNAMIC_DEFINITION_TYPE(IntEnum):
DEFINE_BY_IDENTIFIER = 1
DEFINE_BY_MEMORY_ADDRESS = 2
CLEAR_DYNAMICALLY_DEFINED_DATA_IDENTIFIER = 3
class ISOTP_FRAME_TYPE(IntEnum):
SINGLE = 0
FIRST = 1
CONSECUTIVE = 2
FLOW = 3
class DynamicSourceDefinition(NamedTuple):
data_identifier: int
position: int
memory_size: int
memory_address: int
class DTC_GROUP_TYPE(IntEnum):
EMISSIONS = 0x000000
ALL = 0xFFFFFF
class DTC_REPORT_TYPE(IntEnum):
NUMBER_OF_DTC_BY_STATUS_MASK = 0x01
DTC_BY_STATUS_MASK = 0x02
DTC_SNAPSHOT_IDENTIFICATION = 0x03
DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER = 0x04
DTC_SNAPSHOT_RECORD_BY_RECORD_NUMBER = 0x05
DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER = 0x06
NUMBER_OF_DTC_BY_SEVERITY_MASK_RECORD = 0x07
DTC_BY_SEVERITY_MASK_RECORD = 0x08
SEVERITY_INFORMATION_OF_DTC = 0x09
SUPPORTED_DTC = 0x0A
FIRST_TEST_FAILED_DTC = 0x0B
FIRST_CONFIRMED_DTC = 0x0C
MOST_RECENT_TEST_FAILED_DTC = 0x0D
MOST_RECENT_CONFIRMED_DTC = 0x0E
MIRROR_MEMORY_DTC_BY_STATUS_MASK = 0x0F
MIRROR_MEMORY_DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER = 0x10
NUMBER_OF_MIRROR_MEMORY_DTC_BY_STATUS_MASK = 0x11
NUMBER_OF_EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK = 0x12
EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK = 0x13
DTC_FAULT_DETECTION_COUNTER = 0x14
DTC_WITH_PERMANENT_STATUS = 0x15
class DTC_STATUS_MASK_TYPE(IntEnum):
TEST_FAILED = 0x01
TEST_FAILED_THIS_OPERATION_CYCLE = 0x02
PENDING_DTC = 0x04
CONFIRMED_DTC = 0x08
TEST_NOT_COMPLETED_SINCE_LAST_CLEAR = 0x10
TEST_FAILED_SINCE_LAST_CLEAR = 0x20
TEST_NOT_COMPLETED_THIS_OPERATION_CYCLE = 0x40
WARNING_INDICATOR_REQUESTED = 0x80
ALL = 0xFF
class DTC_SEVERITY_MASK_TYPE(IntEnum):
MAINTENANCE_ONLY = 0x20
CHECK_AT_NEXT_HALT = 0x40
CHECK_IMMEDIATELY = 0x80
ALL = 0xE0
class CONTROL_PARAMETER_TYPE(IntEnum):
RETURN_CONTROL_TO_ECU = 0
RESET_TO_DEFAULT = 1
FREEZE_CURRENT_STATE = 2
SHORT_TERM_ADJUSTMENT = 3
class ROUTINE_CONTROL_TYPE(IntEnum):
START = 1
STOP = 2
REQUEST_RESULTS = 3
class ROUTINE_IDENTIFIER_TYPE(IntEnum):
ERASE_MEMORY = 0xFF00
CHECK_PROGRAMMING_DEPENDENCIES = 0xFF01
ERASE_MIRROR_MEMORY_DTCS = 0xFF02
class MessageTimeoutError(Exception):
pass
class NegativeResponseError(Exception):
def __init__(self, message, service_id, error_code):
super().__init__()
self.message = message
self.service_id = service_id
self.error_code = error_code
def __str__(self):
return self.message
class InvalidServiceIdError(Exception):
pass
class InvalidSubFunctionError(Exception):
pass
class InvalidSubAddressError(Exception):
pass
_negative_response_codes = {
0x00: 'positive response',
0x10: 'general reject',
0x11: 'service not supported',
0x12: 'sub-function not supported',
0x13: 'incorrect message length or invalid format',
0x14: 'response too long',
0x21: 'busy repeat request',
0x22: 'conditions not correct',
0x24: 'request sequence error',
0x25: 'no response from subnet component',
0x26: 'failure prevents execution of requested action',
0x31: 'request out of range',
0x33: 'security access denied',
0x35: 'invalid key',
0x36: 'exceed number of attempts',
0x37: 'required time delay not expired',
0x70: 'upload download not accepted',
0x71: 'transfer data suspended',
0x72: 'general programming failure',
0x73: 'wrong block sequence counter',
0x78: 'request correctly received - response pending',
0x7e: 'sub-function not supported in active session',
0x7f: 'service not supported in active session',
0x81: 'rpm too high',
0x82: 'rpm too low',
0x83: 'engine is running',
0x84: 'engine is not running',
0x85: 'engine run time too low',
0x86: 'temperature too high',
0x87: 'temperature too low',
0x88: 'vehicle speed too high',
0x89: 'vehicle speed too low',
0x8a: 'throttle/pedal too high',
0x8b: 'throttle/pedal too low',
0x8c: 'transmission not in neutral',
0x8d: 'transmission not in gear',
0x8f: 'brake switch(es) not closed',
0x90: 'shifter lever not in park',
0x91: 'torque converter clutch locked',
0x92: 'voltage too high',
0x93: 'voltage too low',
}
def get_dtc_num_as_str(dtc_num_bytes):
# ISO 15031-6
designator = {
0b00: "P",
0b01: "C",
0b10: "B",
0b11: "U",
}
d = designator[dtc_num_bytes[0] >> 6]
n = bytes([dtc_num_bytes[0] & 0x3F]) + dtc_num_bytes[1:]
return d + n.hex()
def get_dtc_status_names(status):
result = list()
for m in DTC_STATUS_MASK_TYPE:
if m == DTC_STATUS_MASK_TYPE.ALL:
continue
if status & m.value:
result.append(m.name)
return result
class CanClient():
def __init__(self, can_send: Callable[[int, bytes, int], None], can_recv: Callable[[], list[tuple[int, int, bytes, int]]],
tx_addr: int, rx_addr: int, bus: int, sub_addr: int | None = None, debug: bool = False):
self.tx = can_send
self.rx = can_recv
self.tx_addr = tx_addr
self.rx_addr = rx_addr
self.rx_buff: Deque[bytes] = deque()
self.sub_addr = sub_addr
self.bus = bus
self.debug = debug
def _recv_filter(self, bus: int, addr: int) -> bool:
# handle functional addresses (switch to first addr to respond)
if self.tx_addr == 0x7DF:
is_response = addr >= 0x7E8 and addr <= 0x7EF
if is_response:
if self.debug:
print(f"switch to physical addr {hex(addr)}")
self.tx_addr = addr - 8
self.rx_addr = addr
return is_response
if self.tx_addr == 0x18DB33F1:
is_response = addr >= 0x18DAF100 and addr <= 0x18DAF1FF
if is_response:
if self.debug:
print(f"switch to physical addr {hex(addr)}")
self.tx_addr = 0x18DA00F1 + (addr << 8 & 0xFF00)
self.rx_addr = addr
return bus == self.bus and addr == self.rx_addr
def _recv_buffer(self, drain: bool = False) -> None:
while True:
msgs = self.rx()
if drain:
if self.debug:
print(f"CAN-RX: drain - {len(msgs)}")
self.rx_buff.clear()
else:
for rx_addr, _, rx_data, rx_bus in msgs or []:
if self._recv_filter(rx_bus, rx_addr) and len(rx_data) > 0:
rx_data = bytes(rx_data) # convert bytearray to bytes
if self.debug:
print(f"CAN-RX: {hex(rx_addr)} - 0x{bytes.hex(rx_data)}")
# Cut off sub addr in first byte
if self.sub_addr is not None:
if rx_data[0] != self.sub_addr:
raise InvalidSubAddressError(f"isotp - rx: invalid sub-address: {rx_data[0]}, expected: {self.sub_addr}")
rx_data = rx_data[1:]
self.rx_buff.append(rx_data)
# break when non-full buffer is processed
if len(msgs) < 254:
return
def recv(self, drain: bool = False) -> Generator[bytes, None, None]:
# buffer rx messages in case two response messages are received at once
# (e.g. response pending and success/failure response)
self._recv_buffer(drain)
try:
while True:
yield self.rx_buff.popleft()
except IndexError:
pass # empty
def send(self, msgs: list[bytes], delay: float = 0) -> None:
for i, msg in enumerate(msgs):
if delay and i != 0:
if self.debug:
print(f"CAN-TX: delay - {delay}")
time.sleep(delay)
if self.sub_addr is not None:
msg = bytes([self.sub_addr]) + msg
if self.debug:
print(f"CAN-TX: {hex(self.tx_addr)} - 0x{bytes.hex(msg)}")
assert len(msg) <= 8
self.tx(self.tx_addr, msg, self.bus)
# prevent rx buffer from overflowing on large tx
if i % 10 == 9:
self._recv_buffer()
class IsoTpMessage():
def __init__(self, can_client: CanClient, timeout: float = 1, single_frame_mode: bool = False, separation_time: float = 0,
debug: bool = False, max_len: int = 8):
self._can_client = can_client
self.timeout = timeout
self.single_frame_mode = single_frame_mode
self.debug = debug
self.max_len = max_len
# <= 127, separation time in milliseconds
# 0xF1 to 0xF9 UF, 100 to 900 microseconds
if 1e-4 <= separation_time <= 9e-4:
offset = int(round(separation_time, 4) * 1e4) - 1
separation_time = 0xF1 + offset
elif 0 <= separation_time <= 0.127:
separation_time = round(separation_time * 1000)
else:
raise Exception("Separation time not in range")
self.flow_control_msg = bytes([
0x30, # flow control
0x01 if self.single_frame_mode else 0x00, # block size
separation_time,
]).ljust(self.max_len, b"\x00")
def send(self, dat: bytes, setup_only: bool = False) -> None:
# throw away any stale data
self._can_client.recv(drain=True)
self.tx_dat = dat
self.tx_len = len(dat)
self.tx_idx = 0
self.tx_done = False
self.rx_dat = b""
self.rx_len = 0
self.rx_idx = 0
self.rx_done = False
if self.debug and not setup_only:
print(f"ISO-TP: REQUEST - {hex(self._can_client.tx_addr)} 0x{bytes.hex(self.tx_dat)}")
self._tx_first_frame(setup_only=setup_only)
def _tx_first_frame(self, setup_only: bool = False) -> None:
if self.tx_len < self.max_len:
# single frame (send all bytes)
if self.debug and not setup_only:
print(f"ISO-TP: TX - single frame - {hex(self._can_client.tx_addr)}")
msg = (bytes([self.tx_len]) + self.tx_dat).ljust(self.max_len, b"\x00")
self.tx_done = True
else:
# first frame (send first 6 bytes)
if self.debug and not setup_only:
print(f"ISO-TP: TX - first frame - {hex(self._can_client.tx_addr)}")
msg = (struct.pack("!H", 0x1000 | self.tx_len) + self.tx_dat[:self.max_len - 2]).ljust(self.max_len - 2, b"\x00")
if not setup_only:
self._can_client.send([msg])
def recv(self, timeout=None) -> tuple[bytes | None, bool]:
if timeout is None:
timeout = self.timeout
start_time = time.monotonic()
rx_in_progress = False
try:
while True:
for msg in self._can_client.recv():
frame_type = self._isotp_rx_next(msg)
start_time = time.monotonic()
rx_in_progress = frame_type == ISOTP_FRAME_TYPE.CONSECUTIVE
if self.tx_done and self.rx_done:
return self.rx_dat, False
# no timeout indicates non-blocking
if timeout == 0:
return None, rx_in_progress
if time.monotonic() - start_time > timeout:
raise MessageTimeoutError("timeout waiting for response")
finally:
if self.debug and self.rx_dat:
print(f"ISO-TP: RESPONSE - {hex(self._can_client.rx_addr)} 0x{bytes.hex(self.rx_dat)}")
def _isotp_rx_next(self, rx_data: bytes) -> ISOTP_FRAME_TYPE:
# TODO: Handle CAN frame data optimization, which is allowed with some frame types
# # ISO 15765-2 specifies an eight byte CAN frame for ISO-TP communication
# assert len(rx_data) == self.max_len, f"isotp - rx: invalid CAN frame length: {len(rx_data)}"
if rx_data[0] >> 4 == ISOTP_FRAME_TYPE.SINGLE:
self.rx_len = rx_data[0] & 0x0F
assert self.rx_len < self.max_len, f"isotp - rx: invalid single frame length: {self.rx_len}"
self.rx_dat = rx_data[1:1 + self.rx_len]
self.rx_idx = 0
self.rx_done = True
if self.debug:
print(f"ISO-TP: RX - single frame - {hex(self._can_client.rx_addr)} idx={self.rx_idx} done={self.rx_done}")
return ISOTP_FRAME_TYPE.SINGLE
elif rx_data[0] >> 4 == ISOTP_FRAME_TYPE.FIRST:
self.rx_len = ((rx_data[0] & 0x0F) << 8) + rx_data[1]
assert self.max_len <= self.rx_len, f"isotp - rx: invalid first frame length: {self.rx_len}"
self.rx_dat = rx_data[2:]
self.rx_idx = 0
self.rx_done = False
if self.debug:
print(f"ISO-TP: RX - first frame - {hex(self._can_client.rx_addr)} idx={self.rx_idx} done={self.rx_done}")
if self.debug:
print(f"ISO-TP: TX - flow control continue - {hex(self._can_client.tx_addr)}")
# send flow control message
self._can_client.send([self.flow_control_msg])
return ISOTP_FRAME_TYPE.FIRST
elif rx_data[0] >> 4 == ISOTP_FRAME_TYPE.CONSECUTIVE:
assert not self.rx_done, "isotp - rx: consecutive frame with no active frame"
self.rx_idx += 1
assert self.rx_idx & 0xF == rx_data[0] & 0xF, "isotp - rx: invalid consecutive frame index"
rx_size = self.rx_len - len(self.rx_dat)
self.rx_dat += rx_data[1:1 + rx_size]
if self.rx_len == len(self.rx_dat):
self.rx_done = True
elif self.single_frame_mode:
# notify ECU to send next frame
self._can_client.send([self.flow_control_msg])
if self.debug:
print(f"ISO-TP: RX - consecutive frame - {hex(self._can_client.rx_addr)} idx={self.rx_idx} done={self.rx_done}")
return ISOTP_FRAME_TYPE.CONSECUTIVE
elif rx_data[0] >> 4 == ISOTP_FRAME_TYPE.FLOW:
assert not self.tx_done, "isotp - rx: flow control with no active frame"
assert rx_data[0] != 0x32, "isotp - rx: flow-control overflow/abort"
assert rx_data[0] == 0x30 or rx_data[0] == 0x31, "isotp - rx: flow-control transfer state indicator invalid"
if rx_data[0] == 0x30:
if self.debug:
print(f"ISO-TP: RX - flow control continue - {hex(self._can_client.tx_addr)}")
delay_ts = rx_data[2] & 0x7F
# scale is 1 milliseconds if first bit == 0, 100 micro seconds if first bit == 1
delay_div = 1000. if rx_data[2] & 0x80 == 0 else 10000.
delay_sec = delay_ts / delay_div
# first frame = 6 bytes, each consecutive frame = 7 bytes
num_bytes = self.max_len - 1
start = self.max_len - 2 + self.tx_idx * num_bytes
count = rx_data[1]
end = start + count * num_bytes if count > 0 else self.tx_len
tx_msgs = []
for i in range(start, end, num_bytes):
self.tx_idx += 1
# consecutive tx messages
msg = (bytes([0x20 | (self.tx_idx & 0xF)]) + self.tx_dat[i:i + num_bytes]).ljust(self.max_len, b"\x00")
tx_msgs.append(msg)
# send consecutive tx messages
self._can_client.send(tx_msgs, delay=delay_sec)
if end >= self.tx_len:
self.tx_done = True
if self.debug:
print(f"ISO-TP: TX - consecutive frame - {hex(self._can_client.tx_addr)} idx={self.tx_idx} done={self.tx_done}")
elif rx_data[0] == 0x31:
# wait (do nothing until next flow control message)
if self.debug:
print(f"ISO-TP: TX - flow control wait - {hex(self._can_client.tx_addr)}")
return ISOTP_FRAME_TYPE.FLOW
# 4-15 - reserved
else:
raise Exception(f"isotp - rx: invalid frame type: {rx_data[0] >> 4}")
FUNCTIONAL_ADDRS = [0x7DF, 0x18DB33F1]
def get_rx_addr_for_tx_addr(tx_addr, rx_offset=0x8):
if tx_addr in FUNCTIONAL_ADDRS:
return None
if tx_addr < 0xFFF8:
# pseudo-standard 11 bit response addr (add 8) works for most manufacturers
# allow override; some manufacturers use other offsets for non-OBD2 access
return tx_addr + rx_offset
if tx_addr > 0x10000000 and tx_addr < 0xFFFFFFFF:
# standard 29 bit response addr (flip last two bytes)
return (tx_addr & 0xFFFF0000) + (tx_addr << 8 & 0xFF00) + (tx_addr >> 8 & 0xFF)
raise ValueError(f"invalid tx_addr: {tx_addr}")
class UdsClient():
def __init__(self, panda, tx_addr: int, rx_addr: int | None = None, bus: int = 0, sub_addr: int | None = None, timeout: float = 1,
debug: bool = False, tx_timeout: float = 1, response_pending_timeout: float = 10):
self.bus = bus
self.tx_addr = tx_addr
self.rx_addr = rx_addr if rx_addr is not None else get_rx_addr_for_tx_addr(tx_addr)
self.sub_addr = sub_addr
self.timeout = timeout
self.debug = debug
can_send_with_timeout = partial(panda.can_send, timeout=int(tx_timeout*1000))
self._can_client = CanClient(can_send_with_timeout, panda.can_recv, self.tx_addr, self.rx_addr, self.bus, self.sub_addr, debug=self.debug)
self.response_pending_timeout = response_pending_timeout
# generic uds request
def _uds_request(self, service_type: SERVICE_TYPE, subfunction: int | None = None, data: bytes | None = None) -> bytes:
req = bytes([service_type])
if subfunction is not None:
req += bytes([subfunction])
if data is not None:
req += data
# send request, wait for response
max_len = 8 if self.sub_addr is None else 7
isotp_msg = IsoTpMessage(self._can_client, timeout=self.timeout, debug=self.debug, max_len=max_len)
isotp_msg.send(req)
response_pending = False
while True:
timeout = self.response_pending_timeout if response_pending else self.timeout
resp, _ = isotp_msg.recv(timeout)
if resp is None:
continue
response_pending = False
resp_sid = resp[0] if len(resp) > 0 else None
# negative response
if resp_sid == 0x7F:
service_id = resp[1] if len(resp) > 1 else -1
try:
service_desc = SERVICE_TYPE(service_id).name
except BaseException:
service_desc = 'NON_STANDARD_SERVICE'
error_code = resp[2] if len(resp) > 2 else -1
try:
error_desc = _negative_response_codes[error_code]
except BaseException:
error_desc = resp[3:].hex()
# wait for another message if response pending
if error_code == 0x78:
response_pending = True
if self.debug:
print("UDS-RX: response pending")
continue
raise NegativeResponseError(f'{service_desc} - {error_desc}', service_id, error_code)
# positive response
if service_type + 0x40 != resp_sid:
resp_sid_hex = hex(resp_sid) if resp_sid is not None else None
raise InvalidServiceIdError(f'invalid response service id: {resp_sid_hex}')
if subfunction is not None:
resp_sfn = resp[1] if len(resp) > 1 else None
if subfunction != resp_sfn:
resp_sfn_hex = hex(resp_sfn) if resp_sfn is not None else None
raise InvalidSubFunctionError(f'invalid response subfunction: {resp_sfn_hex}')
# return data (exclude service id and sub-function id)
return resp[(1 if subfunction is None else 2):]
# services
def diagnostic_session_control(self, session_type: SESSION_TYPE):
self._uds_request(SERVICE_TYPE.DIAGNOSTIC_SESSION_CONTROL, subfunction=session_type)
def ecu_reset(self, reset_type: RESET_TYPE):
resp = self._uds_request(SERVICE_TYPE.ECU_RESET, subfunction=reset_type)
power_down_time = None
if reset_type == RESET_TYPE.ENABLE_RAPID_POWER_SHUTDOWN:
power_down_time = resp[0]
return power_down_time
def security_access(self, access_type: ACCESS_TYPE, security_key: bytes = b'', data_record: bytes = b''):
request_seed = access_type % 2 != 0
if request_seed and len(security_key) != 0:
raise ValueError('security_key not allowed')
if not request_seed and len(security_key) == 0:
raise ValueError('security_key is missing')
if not request_seed and len(data_record) != 0:
raise ValueError('data_record not allowed')
data = security_key + data_record
resp = self._uds_request(SERVICE_TYPE.SECURITY_ACCESS, subfunction=access_type, data=data)
if request_seed:
security_seed = resp
return security_seed
def communication_control(self, control_type: CONTROL_TYPE, message_type: MESSAGE_TYPE):
data = bytes([message_type])
self._uds_request(SERVICE_TYPE.COMMUNICATION_CONTROL, subfunction=control_type, data=data)
def tester_present(self, ):
self._uds_request(SERVICE_TYPE.TESTER_PRESENT, subfunction=0x00)
def access_timing_parameter(self, timing_parameter_type: TIMING_PARAMETER_TYPE, parameter_values: bytes | None = None):
write_custom_values = timing_parameter_type == TIMING_PARAMETER_TYPE.SET_TO_GIVEN_VALUES
read_values = (timing_parameter_type == TIMING_PARAMETER_TYPE.READ_CURRENTLY_ACTIVE or
timing_parameter_type == TIMING_PARAMETER_TYPE.READ_EXTENDED_SET)
if not write_custom_values and parameter_values is not None:
raise ValueError('parameter_values not allowed')
if write_custom_values and parameter_values is None:
raise ValueError('parameter_values is missing')
resp = self._uds_request(SERVICE_TYPE.ACCESS_TIMING_PARAMETER, subfunction=timing_parameter_type, data=parameter_values)
if read_values:
# TODO: parse response into values?
parameter_values = resp
return parameter_values
def secured_data_transmission(self, data: bytes):
# TODO: split data into multiple input parameters?
resp = self._uds_request(SERVICE_TYPE.SECURED_DATA_TRANSMISSION, subfunction=None, data=data)
# TODO: parse response into multiple output values?
return resp
def control_dtc_setting(self, dtc_setting_type: DTC_SETTING_TYPE):
self._uds_request(SERVICE_TYPE.CONTROL_DTC_SETTING, subfunction=dtc_setting_type)
def response_on_event(self, response_event_type: RESPONSE_EVENT_TYPE, store_event: bool, window_time: int,
event_type_record: int, service_response_record: int):
if store_event:
response_event_type |= 0x20 # type: ignore
# TODO: split record parameters into arrays
data = bytes([window_time, event_type_record, service_response_record])
resp = self._uds_request(SERVICE_TYPE.RESPONSE_ON_EVENT, subfunction=response_event_type, data=data)
if response_event_type == RESPONSE_EVENT_TYPE.REPORT_ACTIVATED_EVENTS:
return {
"num_of_activated_events": resp[0],
"data": resp[1:], # TODO: parse the reset of response
}
return {
"num_of_identified_events": resp[0],
"event_window_time": resp[1],
"data": resp[2:], # TODO: parse the reset of response
}
def link_control(self, link_control_type: LINK_CONTROL_TYPE, baud_rate_type: BAUD_RATE_TYPE | None = None):
data: bytes | None
if link_control_type == LINK_CONTROL_TYPE.VERIFY_BAUDRATE_TRANSITION_WITH_FIXED_BAUDRATE:
# baud_rate_type = BAUD_RATE_TYPE
data = bytes([cast(int, baud_rate_type)])
elif link_control_type == LINK_CONTROL_TYPE.VERIFY_BAUDRATE_TRANSITION_WITH_SPECIFIC_BAUDRATE:
# baud_rate_type = custom value (3 bytes big-endian)
data = struct.pack('!I', baud_rate_type)[1:]
else:
data = None
self._uds_request(SERVICE_TYPE.LINK_CONTROL, subfunction=link_control_type, data=data)
def read_data_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE):
# TODO: support list of identifiers
data = struct.pack('!H', data_identifier_type)
resp = self._uds_request(SERVICE_TYPE.READ_DATA_BY_IDENTIFIER, subfunction=None, data=data)
resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
if resp_id != data_identifier_type:
raise ValueError(f'invalid response data identifier: {hex(resp_id)} expected: {hex(data_identifier_type)}')
return resp[2:]
def read_memory_by_address(self, memory_address: int, memory_size: int, memory_address_bytes: int = 4, memory_size_bytes: int = 1):
if memory_address_bytes < 1 or memory_address_bytes > 4:
raise ValueError(f'invalid memory_address_bytes: {memory_address_bytes}')
if memory_size_bytes < 1 or memory_size_bytes > 4:
raise ValueError(f'invalid memory_size_bytes: {memory_size_bytes}')
data = bytes([memory_size_bytes << 4 | memory_address_bytes])
if memory_address >= 1 << (memory_address_bytes * 8):
raise ValueError(f'invalid memory_address: {memory_address}')
data += struct.pack('!I', memory_address)[4 - memory_address_bytes:]
if memory_size >= 1 << (memory_size_bytes * 8):
raise ValueError(f'invalid memory_size: {memory_size}')
data += struct.pack('!I', memory_size)[4 - memory_size_bytes:]
resp = self._uds_request(SERVICE_TYPE.READ_MEMORY_BY_ADDRESS, subfunction=None, data=data)
return resp
def read_scaling_data_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE):
data = struct.pack('!H', data_identifier_type)
resp = self._uds_request(SERVICE_TYPE.READ_SCALING_DATA_BY_IDENTIFIER, subfunction=None, data=data)
resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
if resp_id != data_identifier_type:
raise ValueError(f'invalid response data identifier: {hex(resp_id)}')
return resp[2:] # TODO: parse the response
def read_data_by_periodic_identifier(self, transmission_mode_type: TRANSMISSION_MODE_TYPE, periodic_data_identifier: int):
# TODO: support list of identifiers
data = bytes([transmission_mode_type, periodic_data_identifier])
self._uds_request(SERVICE_TYPE.READ_DATA_BY_PERIODIC_IDENTIFIER, subfunction=None, data=data)
def dynamically_define_data_identifier(self, dynamic_definition_type: DYNAMIC_DEFINITION_TYPE, dynamic_data_identifier: int,
source_definitions: list[DynamicSourceDefinition], memory_address_bytes: int = 4, memory_size_bytes: int = 1):
if memory_address_bytes < 1 or memory_address_bytes > 4:
raise ValueError(f'invalid memory_address_bytes: {memory_address_bytes}')
if memory_size_bytes < 1 or memory_size_bytes > 4:
raise ValueError(f'invalid memory_size_bytes: {memory_size_bytes}')
data = struct.pack('!H', dynamic_data_identifier)
if dynamic_definition_type == DYNAMIC_DEFINITION_TYPE.DEFINE_BY_IDENTIFIER:
for s in source_definitions:
data += struct.pack('!H', s.data_identifier) + bytes([s.position, s.memory_size])
elif dynamic_definition_type == DYNAMIC_DEFINITION_TYPE.DEFINE_BY_MEMORY_ADDRESS:
data += bytes([memory_size_bytes << 4 | memory_address_bytes])
for s in source_definitions:
if s.memory_address >= 1 << (memory_address_bytes * 8):
raise ValueError(f'invalid memory_address: {s.memory_address}')
data += struct.pack('!I', s.memory_address)[4 - memory_address_bytes:]
if s.memory_size >= 1 << (memory_size_bytes * 8):
raise ValueError(f'invalid memory_size: {s.memory_size}')
data += struct.pack('!I', s.memory_size)[4 - memory_size_bytes:]
elif dynamic_definition_type == DYNAMIC_DEFINITION_TYPE.CLEAR_DYNAMICALLY_DEFINED_DATA_IDENTIFIER:
pass
else:
raise ValueError(f'invalid dynamic identifier type: {hex(dynamic_definition_type)}')
self._uds_request(SERVICE_TYPE.DYNAMICALLY_DEFINE_DATA_IDENTIFIER, subfunction=dynamic_definition_type, data=data)
def write_data_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE, data_record: bytes):
data = struct.pack('!H', data_identifier_type) + data_record
resp = self._uds_request(SERVICE_TYPE.WRITE_DATA_BY_IDENTIFIER, subfunction=None, data=data)
resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
if resp_id != data_identifier_type:
raise ValueError(f'invalid response data identifier: {hex(resp_id)}')
def write_memory_by_address(self, memory_address: int, memory_size: int, data_record: bytes, memory_address_bytes: int = 4, memory_size_bytes: int = 1):
if memory_address_bytes < 1 or memory_address_bytes > 4:
raise ValueError(f'invalid memory_address_bytes: {memory_address_bytes}')
if memory_size_bytes < 1 or memory_size_bytes > 4:
raise ValueError(f'invalid memory_size_bytes: {memory_size_bytes}')
data = bytes([memory_size_bytes << 4 | memory_address_bytes])
if memory_address >= 1 << (memory_address_bytes * 8):
raise ValueError(f'invalid memory_address: {memory_address}')
data += struct.pack('!I', memory_address)[4 - memory_address_bytes:]
if memory_size >= 1 << (memory_size_bytes * 8):
raise ValueError(f'invalid memory_size: {memory_size}')
data += struct.pack('!I', memory_size)[4 - memory_size_bytes:]
data += data_record
self._uds_request(SERVICE_TYPE.WRITE_MEMORY_BY_ADDRESS, subfunction=0x00, data=data)
def clear_diagnostic_information(self, dtc_group_type: DTC_GROUP_TYPE):
data = struct.pack('!I', dtc_group_type)[1:] # 3 bytes
self._uds_request(SERVICE_TYPE.CLEAR_DIAGNOSTIC_INFORMATION, subfunction=None, data=data)
def read_dtc_information(self, dtc_report_type: DTC_REPORT_TYPE, dtc_status_mask_type: DTC_STATUS_MASK_TYPE = DTC_STATUS_MASK_TYPE.ALL,
dtc_severity_mask_type: DTC_SEVERITY_MASK_TYPE = DTC_SEVERITY_MASK_TYPE.ALL, dtc_mask_record: int = 0xFFFFFF,
dtc_snapshot_record_num: int = 0xFF, dtc_extended_record_num: int = 0xFF):
data = b''
# dtc_status_mask_type
if dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_DTC_BY_STATUS_MASK or \
dtc_report_type == DTC_REPORT_TYPE.DTC_BY_STATUS_MASK or \
dtc_report_type == DTC_REPORT_TYPE.MIRROR_MEMORY_DTC_BY_STATUS_MASK or \
dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_MIRROR_MEMORY_DTC_BY_STATUS_MASK or \
dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK or \
dtc_report_type == DTC_REPORT_TYPE.EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK:
data += bytes([dtc_status_mask_type])
# dtc_mask_record
if dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_IDENTIFICATION or \
dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER or \
dtc_report_type == DTC_REPORT_TYPE.DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER or \
dtc_report_type == DTC_REPORT_TYPE.MIRROR_MEMORY_DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER or \
dtc_report_type == DTC_REPORT_TYPE.SEVERITY_INFORMATION_OF_DTC:
data += struct.pack('!I', dtc_mask_record)[1:] # 3 bytes
# dtc_snapshot_record_num
if dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_IDENTIFICATION or \
dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER or \
dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_RECORD_BY_RECORD_NUMBER:
data += bytes([dtc_snapshot_record_num])
# dtc_extended_record_num
if dtc_report_type == DTC_REPORT_TYPE.DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER or \
dtc_report_type == DTC_REPORT_TYPE.MIRROR_MEMORY_DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER:
data += bytes([dtc_extended_record_num])
# dtc_severity_mask_type
if dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_DTC_BY_SEVERITY_MASK_RECORD or \
dtc_report_type == DTC_REPORT_TYPE.DTC_BY_SEVERITY_MASK_RECORD:
data += bytes([dtc_severity_mask_type, dtc_status_mask_type])
resp = self._uds_request(SERVICE_TYPE.READ_DTC_INFORMATION, subfunction=dtc_report_type, data=data)
# TODO: parse response
return resp
def input_output_control_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE, control_parameter_type: CONTROL_PARAMETER_TYPE,
control_option_record: bytes = b'', control_enable_mask_record: bytes = b''):
data = struct.pack('!H', data_identifier_type) + bytes([control_parameter_type]) + control_option_record + control_enable_mask_record
resp = self._uds_request(SERVICE_TYPE.INPUT_OUTPUT_CONTROL_BY_IDENTIFIER, subfunction=None, data=data)
resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
if resp_id != data_identifier_type:
raise ValueError(f'invalid response data identifier: {hex(resp_id)}')
return resp[2:]
def routine_control(self, routine_control_type: ROUTINE_CONTROL_TYPE, routine_identifier_type: ROUTINE_IDENTIFIER_TYPE, routine_option_record: bytes = b''):
data = struct.pack('!H', routine_identifier_type) + routine_option_record
resp = self._uds_request(SERVICE_TYPE.ROUTINE_CONTROL, subfunction=routine_control_type, data=data)
resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
if resp_id != routine_identifier_type:
raise ValueError(f'invalid response routine identifier: {hex(resp_id)}')
return resp[2:]
def request_download(self, memory_address: int, memory_size: int, memory_address_bytes: int = 4, memory_size_bytes: int = 4, data_format: int = 0x00):
data = bytes([data_format])
if memory_address_bytes < 1 or memory_address_bytes > 4:
raise ValueError(f'invalid memory_address_bytes: {memory_address_bytes}')
if memory_size_bytes < 1 or memory_size_bytes > 4:
raise ValueError(f'invalid memory_size_bytes: {memory_size_bytes}')
data += bytes([memory_size_bytes << 4 | memory_address_bytes])
if memory_address >= 1 << (memory_address_bytes * 8):
raise ValueError(f'invalid memory_address: {memory_address}')
data += struct.pack('!I', memory_address)[4 - memory_address_bytes:]
if memory_size >= 1 << (memory_size_bytes * 8):
raise ValueError(f'invalid memory_size: {memory_size}')
data += struct.pack('!I', memory_size)[4 - memory_size_bytes:]
resp = self._uds_request(SERVICE_TYPE.REQUEST_DOWNLOAD, subfunction=None, data=data)
max_num_bytes_len = resp[0] >> 4 if len(resp) > 0 else 0
if max_num_bytes_len >= 1 and max_num_bytes_len <= 4:
max_num_bytes = struct.unpack('!I', (b"\x00" * (4 - max_num_bytes_len)) + resp[1:max_num_bytes_len + 1])[0]
else:
raise ValueError(f'invalid max_num_bytes_len: {max_num_bytes_len}')
return max_num_bytes # max number of bytes per transfer data request
def request_upload(self, memory_address: int, memory_size: int, memory_address_bytes: int = 4, memory_size_bytes: int = 4, data_format: int = 0x00):
data = bytes([data_format])
if memory_address_bytes < 1 or memory_address_bytes > 4:
raise ValueError(f'invalid memory_address_bytes: {memory_address_bytes}')
if memory_size_bytes < 1 or memory_size_bytes > 4:
raise ValueError(f'invalid memory_size_bytes: {memory_size_bytes}')
data += bytes([memory_size_bytes << 4 | memory_address_bytes])
if memory_address >= 1 << (memory_address_bytes * 8):
raise ValueError(f'invalid memory_address: {memory_address}')
data += struct.pack('!I', memory_address)[4 - memory_address_bytes:]
if memory_size >= 1 << (memory_size_bytes * 8):
raise ValueError(f'invalid memory_size: {memory_size}')
data += struct.pack('!I', memory_size)[4 - memory_size_bytes:]
resp = self._uds_request(SERVICE_TYPE.REQUEST_UPLOAD, subfunction=None, data=data)
max_num_bytes_len = resp[0] >> 4 if len(resp) > 0 else 0
if max_num_bytes_len >= 1 and max_num_bytes_len <= 4:
max_num_bytes = struct.unpack('!I', (b"\x00" * (4 - max_num_bytes_len)) + resp[1:max_num_bytes_len + 1])[0]
else:
raise ValueError(f'invalid max_num_bytes_len: {max_num_bytes_len}')
return max_num_bytes # max number of bytes per transfer data request
def transfer_data(self, block_sequence_count: int, data: bytes = b''):
data = bytes([block_sequence_count]) + data
resp = self._uds_request(SERVICE_TYPE.TRANSFER_DATA, subfunction=None, data=data)
resp_id = resp[0] if len(resp) > 0 else None
if resp_id != block_sequence_count:
raise ValueError(f'invalid block_sequence_count: {resp_id}')
return resp[1:]
def request_transfer_exit(self):
self._uds_request(SERVICE_TYPE.REQUEST_TRANSFER_EXIT, subfunction=None)
Reference in New Issue View Git Blame Copy Permalink