* main
* can_comms
* main_declarations->main_definitions
* rename this also
* can_definitions
* faults
* power_saving
* provision
* gitversion
* not included
* no include for now
* cleanup is_enumerated, rename comms and init spi
* big comms refactor, building now
* misra fixes
* more fixes
* misra try 3
* cleanup
* this belongs in a separate PR
* remove unneccesary file
* revert llspi changes
* llspi misra fix
* enable SPI on F4 and setup gpio
* duh
* wip: spi comms
* more spi wip
* dynamic sector erasing
* Revert "dynamic sector erasing"
This reverts commit fce1215a2e.
* more sectors to be erased
* debugging
* woah, this works
* cleanup on the panda side
* add sync and checksum checks, and fix recovery on errors
* this seems relatively stable
* add retrying
* this is stabler
* some endianness and endpoint fixes
* builds
* revert that
* add that back
* checksum start
* start splitting up driver
* spi behind flag
* cleanup test
* bump up timeout
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* cleanup is_enumerated, rename comms and init spi
* big comms refactor, building now
* misra fixes
* more fixes
* misra try 3
* cleanup
* this belongs in a separate PR
* remove unneccesary file
* revert llspi changes
* this needs packing
* fix pedal usb
Co-authored-by: Comma Device <device@comma.ai>
* Add RTC with LSI for BP, GP, WP
* disable jenkins temporarily, REVERT!
* experiments
* cleanup is still needed
* cppcheck unused suppress
* raise deepsleep limit timeout to 120sec
* more experiments on usb_enumerated
* continue
* soft_disconnect
* almost done
* not enough
* no ignition
* still don't like it..
* rename to has_rtc_battery
* clock_source on the way!?
* delay 3 sec
* works on C3, needs test on C2
* And this is for C2
* disable bootkick
* misra 10.4
* ..
* ..
* set power state the right way
* change that
* seems don't need that? check on C2/C3
* partially works on RP...
* comments (will work after rebase)
* change fault name
* switch to manual activation mode
* Revert "disable jenkins temporarily, REVERT!"
This reverts commit 578d425fa7.
* my dear pedal!
* expose debug flags and improve debug console output
* puth4
* other flags need to be set more locally
* fix misra violations
* fix misra violation
* fix misra violation
* Remove non-EON panda build
* missed that
* fixup readme
* more readme
* simplify ci
* add USB command to disable heartbeat checks in debug mode
* clean that up too
* more cleanup
* fix path
* disable heartbeat in set_safety_mode
* more red
* remove one more EON ref
* Added an initial working implementation of the register readback and applied it to the LLCAN registers. Also fixed an init bug in CAN.
* Locally disable pylint import error
* Reverted change to CAN-obj->FA1R setting
* Fixed misra compliance
* Changed hash function name
* Fixed CAN filter setting
* Added voltage health test
* Converted ADC to register functions
* Converted clock to use register setters
* Added check to see if fault status is zero after running test
* Converted DAC to use register setters
* Converted fan to use register setters
* Converted gmlan bitbanging to use register setters
* Changed over interrupt driver to use register setters. Also moved some includes and definition places for critical sections
* Fixed build
* Converted LLGPIO to use register setters
* Converted pwm to use register setters
* Fixed cold boot
* Fixed health fault check in automated tests
* Added comment for the future (issue #367)
* Converted RTC driver to use register setters
* Converted SPI to use register setters
* Converted timer driver to use register setters
* Fixed register fault on white pandas and disabled showing of fault for release
* Bump version
* late usb
* Added type support for black panda
* Added harness presence and orientation detection
* harness relay driving code
* Added intercept support in black panda code. Switched around can0 and can2
* Disable ADCs after orientation detection. Ignition interrupts via harness
* WIP: Hardware abstraction layer + black panda bringup
* Fixed bootstub build
* Fixed bootstub for pedal
* Fixed infinite loops
* Got CAN buses working on white again
* Fixed pedal build and black can interfaces
* Got CAN buses working on black panda
* Finished loopback test for black panda
* Erase all flash sectors on the panda. Increased binary limit. Added extra python functions.
* Fixed python
* Made new code MISRA compliant
* Cleaned up ignition. Fixed build
* Fixed health packet
* Fixed CAN mode on black bug. Changed OBD to switch on ELM mode
* Fixes from Github review
* Fixed MISRA issue for pedal
* Fixed failing gmlan tests
* ELM327 safety: allow diagnostic on all buses
* Cleaned up EON relay code
* delete only 3 sectors instead of 11 to allow a new build to be flashed. Much faster to flash
* Removed CAN only can0 output mode. Does not make sense on black panda due to reversibility issues.
* Added heartbeat logic for EON code on panda. Go to NOOUTPUT if EON does not send a heartbeat for 5 seconds.
* Remove all CAN buses live on EON startup. Shouldn't be necessary to have this separate case
* Formatting
* Added file I forgot to push
* Added heartbeat to testing code to make sure EON tests don't fail. Should probably find a better way to do this though. Heartbeat thread didn't work, concurrent USB connection issues...
* Safety: support black panda for Honda Bosch
* Disable OBD2 if setting to NOOUTPUT mode
* Run safety tests for all hw_types
* Fail test if subtest fails
* fix safety tests
Maxime Desroches
Adeeb Shihadeh
Robbe Derks
Igor Biletskyy
Greg Hogan
Willem Melching
George Hotz
Riccardo