panda-meb

mirror of https://github.com/infiniteCable2/panda.git synced 2026-02-18 17:23:52 +08:00

Files

dzid26 d37d25e057 Separate F4 and H7 includes (#1955 )

* fix: stm32h7 doesn't have v8 core

* fix:  cm3 was depriciated

2024-05-26 13:12:25 -07:00

boards

enable misra-c2012-11.8 (#1916 )

2024-03-24 12:38:25 -07:00

debug

update to ubuntu 24.04 (#1941 )

2024-04-28 15:32:18 -07:00

drivers

SPI: add test endpoint for arbitrary lengths (#1949 )

2024-05-16 19:36:40 -07:00

jungle

enable misra-c2012-11.8 (#1916 )

2024-03-24 12:38:25 -07:00

obj

Revert commits that broke USB for openpilot.

2017-07-12 11:27:16 -07:00

safety

Increase Subaru RPM limit (#1937 )

2024-04-25 13:56:25 -07:00

stm32f4

Separate F4 and H7 includes (#1955 )

2024-05-26 13:12:25 -07:00

stm32h7

Separate F4 and H7 includes (#1955 )

2024-05-26 13:12:25 -07:00

__init__.py

Revert commits that broke USB for openpilot.

2017-07-12 11:27:16 -07:00

bootstub_declarations.h

enable misra-c2012-11.8 (#1916 )

2024-03-24 12:38:25 -07:00

bootstub.c

(almost) enable cppcheck unusedFunction (#1875 )

2024-02-17 14:16:15 -08:00

can_comms.h

enable misra-constParameterPointer (#1826 )

2024-01-20 21:50:42 -08:00

can_definitions.h

remove rest of gmlan (#1908 )

2024-03-21 13:56:36 -07:00

comms_definitions.h

enable misra-constParameterPointer (#1826 )

2024-01-20 21:50:42 -08:00

config.h

remove unused deepsleep stuff (#1914 )

2024-03-22 14:48:49 -07:00

crc.h

enable misra-constParameterPointer (#1826 )

2024-01-20 21:50:42 -08:00

critical.h

Revert "Revert "Register readback on most modules. Still need to convert the other ones (#396 )""

2019-12-05 14:19:29 -08:00

dfu_util_f4.sh

DFU flasher: permissions and address

2022-08-25 10:24:25 -07:00

dfu_util_h7.sh

flashing: unify recover.sh (#1043 )

2022-08-24 19:15:25 -07:00

early_init.h

finish esp/gps removal (#1559 )

2023-08-06 12:29:54 -07:00

fake_stm.h

Remove flash logging (#1674 )

2023-09-30 12:49:46 -07:00

faults.h

remove rest of gmlan (#1908 )

2024-03-21 13:56:36 -07:00

flash.py

exit flashing scripts with error if no pandas

2024-03-21 13:04:45 -07:00

flasher.h

(almost) enable cppcheck unusedFunction (#1875 )

2024-02-17 14:16:15 -08:00

health.h

remove rest of gmlan (#1908 )

2024-03-21 13:56:36 -07:00

libc.h

enable misra-c2012-21.2 (#1819 )

2024-01-18 14:29:01 -08:00

main_comms.h

remove unused deepsleep stuff (#1914 )

2024-03-22 14:48:49 -07:00

main_declarations.h

enable misra-c2012-11.8 (#1916 )

2024-03-24 12:38:25 -07:00

main.c

enable misra-config checks (#1879 )

2024-03-24 12:10:37 -07:00

power_saving.h

remove HW GMLAN support (#1848 )

2024-02-03 23:18:33 -08:00

provision.h

(almost) enable cppcheck unusedFunction (#1875 )

2024-02-17 14:16:15 -08:00

README.md

Docs update (#1769 )

2023-12-10 11:14:53 -08:00

recover.py

exit flashing scripts with error if no pandas

2024-03-21 13:04:45 -07:00

safety_declarations.h

remove comma pedal (#1902 )

2024-03-17 22:22:46 -07:00

safety.h

remove comma pedal (#1902 )

2024-03-17 22:22:46 -07:00

SConscript

remove pedal fw (#1872 )

2024-02-16 22:58:01 -08:00

utils.h

enable misra-c2012-10.5 (#1825 )

2024-01-20 17:05:12 -08:00

README.md

Programming

./flash.py        # flash application
./recover.py      # flash bootstub

Debugging

To print out the serial console from the STM32, run tests/debug_console.py

Troubleshooting

If your panda will not flash and green LED is on, use recover.py. If panda is blinking fast with green LED, use flash.py.

Otherwise if LED is off and panda can't be seen with lsusb command, use panda paw to go into DFU mode.

If your device has an internal panda and none of the above works, try running ../tests/reflash_internal_panda.py.