panda-meb

mirror of https://github.com/infiniteCable2/panda.git synced 2026-02-18 09:13:52 +08:00

Files

Adeeb Shihadeh b99d796924 Revert "remove mcu_type (#2324 )"

This reverts commit 8922b48a30.

2026-02-10 20:31:44 -08:00

boards

Cuatro siren (#2294 )

2025-11-03 15:28:35 -08:00

body

Add comma body firmware (#2291 )

2025-10-24 17:14:39 -07:00

debug

bye bye f4 (#2259 )

2025-08-26 12:37:36 -07:00

drivers

garbage collect always-true condition check (#2305 )

2025-12-10 13:00:20 -08:00

jungle

Revert "remove mcu_type (#2324 )"

2026-02-10 20:31:44 -08:00

obj

Revert commits that broke USB for openpilot.

2017-07-12 11:27:16 -07:00

stm32h7

add double buffer for microphone (#2299 )

2025-11-03 15:56:42 -08:00

__init__.py

Revert commits that broke USB for openpilot.

2017-07-12 11:27:16 -07:00

bootstub_declarations.h

enable misra-c2012-11.8 (#1916 )

2024-03-24 12:38:25 -07:00

bootstub.c

remove some old comments

2025-07-27 15:06:30 -07:00

can_comms.h

misra8.4: board/*.h (#2026 )

2024-09-19 21:15:08 -07:00

can.h

use CANPacket definition from opendbc

2025-09-28 13:37:35 -07:00

comms_definitions.h

enable misra-constParameterPointer (#1826 )

2024-01-20 21:50:42 -08:00

config.h

bye bye f4 (#2259 )

2025-08-26 12:37:36 -07:00

crc.h

quick garbage collection pass (#2231 )

2025-07-19 21:05:12 -07:00

critical_declarations.h

misra8.4: board/*.h (#2026 )

2024-09-19 21:15:08 -07:00

critical.h

misra8.4: board/*.h (#2026 )

2024-09-19 21:15:08 -07:00

early_init.h

quick garbage collection pass (#2231 )

2025-07-19 21:05:12 -07:00

fake_stm.h

bye bye f4 (#2259 )

2025-08-26 12:37:36 -07:00

faults_declarations.h

CAN driver cleanup (#2276 )

2025-09-10 20:00:41 -07:00

faults.h

misra8.4: board/*.h (#2026 )

2024-09-19 21:15:08 -07:00

flash.py

Add multiple pandas selector (#2015 )

2024-09-24 16:37:23 -07:00

flasher.h

Adjust gitversion handling to include null terminator in length calculations. (#2309 )

2025-12-28 12:53:02 -08:00

health.h

bye bye f4 (#2259 )

2025-08-26 12:37:36 -07:00

libc.h

Align delay and compensate (#2318 )

2026-01-22 13:46:26 +01:00

main_comms.h

CAN driver cleanup (#2276 )

2025-09-10 20:00:41 -07:00

main_declarations.h

misc cleanup (#2261 )

2025-08-26 15:01:22 -07:00

main_definitions.h

misc cleanup (#2261 )

2025-08-26 15:01:22 -07:00

main.c

safety: move relay fault management (#2281 )

2025-09-27 15:58:04 -07:00

power_saving_declarations.h

misra8.4: board/*.h (#2026 )

2024-09-19 21:15:08 -07:00

power_saving.h

quick garbage collection pass (#2231 )

2025-07-19 21:05:12 -07:00

provision.h

misra8.4: board/*.h (#2026 )

2024-09-19 21:15:08 -07:00

README.md

Move setup to pyproject (#2207 )

2025-05-19 19:24:49 -07:00

recover.py

what was that doing there?

2024-11-22 19:33:04 -08:00

utils.h

Enable misra-c2012-1.2 (#1962 )

2024-05-30 22:13:47 -07:00

README.md

Programming

./flash.py        # flash application
./recover.py      # flash bootstub

Debugging

To print out the serial console from the STM32, run tests/debug_console.py

Troubleshooting

If your panda will not flash and green LED is on, use recover.py. If panda is blinking fast with green LED, use flash.py.

Otherwise if LED is off and panda can't be seen with lsusb command, use panda paw to go into DFU mode.

If your device has an internal panda and none of the above works, try running ../scripts/reflash_internal_panda.py.