* no more magic
* bump version
* no need for this
* comment cleanup
* add comms_can_reset tests
* we can't ensure this for compatibility reasons
* add CANPacket_t checksum
* simple chunking
* make pylint happy
* misra happy?
* good practice anyways since we cast to a uint32_t later
* fix bug dropping packets
* minor fixes + prepare for shared lib testing
* working library now
* first queue test
* can send test
* fix running in github actions?
* add big rx test and fix it
* don't complain about empty buffers
* disable for now
* comment
* test runs
* some cleanup
* merge those
* test works
* rm that
* comment
* proper logging
* makes things too slow
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* cleanup external debug serial
* wip: bring up uart7
* more wip
* this does something
* this works
* increase fifo size
* fix misra
* cleanup
* fix misra again
* add SOM debug enum
* reduce SOM buffer on F4
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Allow brake TX on PT bus
* Initial Panda GM cam harness support
* Complete rewrite / simplification
* Add param for cam harness (default is OBD2)
- Forward btw 0 and 2
- Filter LKAS and optionally ACC from cam
* Add param for stock ACC
- Allows ACC on PT bus when set, not otherwise
- Allows ACC from cam when set, not otherwise
* Add temporary WIP EPS timing workaround in ifdef
* Remove keepalive; regen == braking
* Fix MISRA violations
* EPS timing opt-in by param
* Minor clean up
* remove timing code for readability
fix and formatting
* we only need to send one message if cam harness and stock long
* Simplify params
* Removed dup brake msg
* revised params, split 3-ways
* add test
* clean up a bit, no need to send ACC yet
like this
* split out button enable and pcm enable into seperate tests
* some formatting
some formatting
* GM CAM uses PCM cruise for controls_allowed
* fix gas safety tests
* misra
* fix static analysis
comment
* fix brake pressed
* Add OP VOACC override stock cam
* Add VOACC safetyparam to init.py
* openpilot long safety
* do this in another PR
* add back
* add safety tests
* rename
* struct for safety
* not used
* temporary fault fix
* adjust max gas
* allow PSCMStatus in long mode
* stash
* fix max gas
* fix and clean up tests
* clean up longitudinal tests into a common class
* fix pylint
* subclass
* clean that up
* rm
* blocking
* comment
* comment
* lower case
* brake bus
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* temporarily disable Jenkins
* firmware
* python lib
* tests
* ..
* usb load switch to high
* it is still red
* usb power mode remove
* Revert "temporarily disable Jenkins"
This reverts commit a911cfad8daf10763489b7e7bc10107e77eef4bf.
* forgot this
* common periph
* change name
* board tick
* add V2 to CI
* update known bootstub
* Hyundai: Car Port for Tucson Hybrid 2022
* Remove test comments
* Fix fwd_hook
* Allow tx on 0x1a0
* Fix byte counts
* Send LFA and HDA icons based on engageability
* Add FLAG_HYUNDAI_CANFD_HDA2 flag
* Update __init__.py
* Allow tx with CRUISE_INACTIVE
* Panda safety cleanup
* Include bus 0 in rx checks
* Missed one
* Remove redundant check
* Add comments
* start cleanup
* little more
* more cleanup
* tests
* one more test case
* rename
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* fast rpm measurement
* fix indentation
* this seems stable
* clip fan integral
* fix misra
* add fan power to health
* board-specific max rpm
* refactor fan enable
* cleanup
* stall detection and reset
Co-authored-by: Comma Device <device@comma.ai>
* VW PQ: Updated checksum and counter handling
* first pass PQ long control safety
* refactor stock test to prep for long test
* long control tests
* falling edge enable logic and tests
* accidentally worked but this is better
* test misra/cppcheck evaluation of debug build
* Revert "test misra/cppcheck evaluation of debug build"
This reverts commit 7594fc5e2f058d7db1a166e9d61781d6817d9f81.
* allow use of manufacturer ramp-up rate
* soften wheel-touch threshold
* fix tests
* check/test ACC main switch state
* fix CRC for Motor_5
* derp
* retry CI
* try that again
* fuuuu
* fix Motor_5 checksum validation
* use existing acc_main_on global
* re-pin opendbc
* no need for resume spam in longitudinal mode
* concise
* consistency cleanup
* comment and whitespace cleanup
* more cleanup
* more
* restore driver torque threshold
* add long control replay route
* obsolete comment
* proper flag name
* wild to mild-ish
* bump openpilot ref
* Update test_safety_replay.py
* handle non existent routes
* comment consistency/polish
* flip comparison order for falling edge clarity
* restore refs
* read the diff next time, speedy
* srsly
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Allow brake TX on PT bus
* Initial Panda GM cam harness support
* Complete rewrite / simplification
* Add param for cam harness (default is OBD2)
- Forward btw 0 and 2
- Filter LKAS and optionally ACC from cam
* Add param for stock ACC
- Allows ACC on PT bus when set, not otherwise
- Allows ACC from cam when set, not otherwise
* Add temporary WIP EPS timing workaround in ifdef
* Remove keepalive; regen == braking
* Fix MISRA violations
* EPS timing opt-in by param
* Minor clean up
* remove timing code for readability
fix and formatting
* we only need to send one message if cam harness and stock long
* Simplify params
* Removed dup brake msg
* revised params, split 3-ways
* add test
* clean up a bit, no need to send ACC yet
like this
* split out button enable and pcm enable into seperate tests
* some formatting
some formatting
* GM CAM uses PCM cruise for controls_allowed
* fix gas safety tests
* misra
* fix static analysis
comment
* fix brake pressed
* Add OP VOACC override stock cam
* Add VOACC safetyparam to init.py
* Revert "Add VOACC safetyparam to init.py"
This reverts commit 2e46f8746f31c399823d9fae9fb9e77e6fee6eea.
* Revert "Add OP VOACC override stock cam"
This reverts commit a4b096cc1e7ee572b22e5f4422b9a6d43f94479c.
* better comments
* better comments
better comments
fix
* move non-base msg definitions to subclass
* various comments
* TODO: add button safety
* add button safety
* use new pcm_cruise_check
* revert regen braking change
* only cancel button allowed
* Apply suggestions from code review
* Update board/safety/safety_gm.h
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* fix suggestion
* Fix tests
* Revert "Fix tests"
This reverts commit 500577921f32be24934acc80af98aab3af86d028.
* this is a much simpler fix, do full fix in another PR
* tx button safety
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Hyundai: Car Port for 2022 Kona Electric Camera SCC
* add missing flag
* set camera_scc in other safety modes
* Add safety test
* this will be a stock longitudinal port for now
* common cruise check
make this check common
* Fix comment typo
* Camera SCC HKG send CLU11 on bus 2
* Update CLU11 comment
* fix button test when txing
* just add bus 2 to existing addr checks
* actually no, this will never be on bus 2
* CLU11 is always on bus 0
line
* consistent param ordering
* fix test
fix test
* this is fine
* Mistook SCC for CLU, fix
* try to make this a little more clear
* add comment
* fix that
Co-authored-by: Shane Smiskol <shane@smiskol.com>
