python/config.py

import os

BASEDIR = os.path.join(os.path.dirname(os.path.realpath(__file__)), "../")

BOOTSTUB_ADDRESS = 0x8000000

BLOCK_SIZE_FX = 0x800
APP_ADDRESS_FX = 0x8004000
SECTOR_SIZES_FX = [0x4000 for _ in range(4)] + [0x10000] + [0x20000 for _ in range(11)]
DEVICE_SERIAL_NUMBER_ADDR_FX = 0x1FFF79C0
DEFAULT_FW_FN = os.path.join(BASEDIR, "board", "obj", "panda.bin.signed")
DEFAULT_BOOTSTUB_FN = os.path.join(BASEDIR, "board", "obj", "bootstub.panda.bin")

BLOCK_SIZE_H7 = 0x400
APP_ADDRESS_H7 = 0x8020000
SECTOR_SIZES_H7 = [0x20000 for _ in range(7)] # there is an 8th sector, but we use that for the provisioning chunk, so don't program over that!
DEVICE_SERIAL_NUMBER_ADDR_H7 = 0x080FFFC0
DEFAULT_H7_FW_FN = os.path.join(BASEDIR, "board", "obj", "panda_h7.bin.signed")
DEFAULT_H7_BOOTSTUB_FN = os.path.join(BASEDIR, "board", "obj", "bootstub.panda_h7.bin")
Support for STM32H7 and Red Panda (#694) * H7 drivers * Include H7 into the code * fix flash write for H7 * get serial from flasher.h from F4 and H7 * flash.sh and recover.sh for gen3 * add set_data_speed for BRS CAN FD * build all fws * gen3 to panda lib * gen3 name in scons project * disable fd can and brs * gen3 to CI tests * jenkins fix for new tests and build_all * fix pedal test * pedal in panda tests again... * cleanup llfdcan.h * cleanup clock.h * Add LDORDY bit check instead of delay * missing define in stm32h735xx.h lib * board_id helper * enable debug detection again * clean gpio inits * fix board_id helper, make cleaner * comment MCUs in stm lib for faster misra * target MCU * misra-5.5 * improve headers and misra speed * cleanup CI tests * change naming from gen3 to h7 * readable if statement * cleanup llusb.h * only cycle one transceifer in bus-off * move unused funcs to common header * bus_off_err reset * misra 10.4 fdcan * extern to can_data_speed variable * limit can_data_speed array size to 3 * reinit fd can on data speed change * Improve test with ELM327 and extaddr check * bugfix for fdcan * panda python config naming * abstracted init request in llfdcan * misra fdcan * Improve llusb.h for H7 2021-08-02 20:26:15 -07:00			`import os`

			`BASEDIR = os.path.join(os.path.dirname(os.path.realpath(__file__)), "../")`

			`BOOTSTUB_ADDRESS = 0x8000000`

			`BLOCK_SIZE_FX = 0x800`
			`APP_ADDRESS_FX = 0x8004000`
Dynamic sector erase (#1006) * dynamic sector erase * fix red panda flash Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> 2022-08-03 06:58:56 +02:00			`SECTOR_SIZES_FX = [0x4000 for _ in range(4)] + [0x10000] + [0x20000 for _ in range(11)]`
add few mcu config consts, add exports (#704) 2021-08-03 18:26:33 -07:00			`DEVICE_SERIAL_NUMBER_ADDR_FX = 0x1FFF79C0`
Support for STM32H7 and Red Panda (#694) * H7 drivers * Include H7 into the code * fix flash write for H7 * get serial from flasher.h from F4 and H7 * flash.sh and recover.sh for gen3 * add set_data_speed for BRS CAN FD * build all fws * gen3 to panda lib * gen3 name in scons project * disable fd can and brs * gen3 to CI tests * jenkins fix for new tests and build_all * fix pedal test * pedal in panda tests again... * cleanup llfdcan.h * cleanup clock.h * Add LDORDY bit check instead of delay * missing define in stm32h735xx.h lib * board_id helper * enable debug detection again * clean gpio inits * fix board_id helper, make cleaner * comment MCUs in stm lib for faster misra * target MCU * misra-5.5 * improve headers and misra speed * cleanup CI tests * change naming from gen3 to h7 * readable if statement * cleanup llusb.h * only cycle one transceifer in bus-off * move unused funcs to common header * bus_off_err reset * misra 10.4 fdcan * extern to can_data_speed variable * limit can_data_speed array size to 3 * reinit fd can on data speed change * Improve test with ELM327 and extaddr check * bugfix for fdcan * panda python config naming * abstracted init request in llfdcan * misra fdcan * Improve llusb.h for H7 2021-08-02 20:26:15 -07:00			`DEFAULT_FW_FN = os.path.join(BASEDIR, "board", "obj", "panda.bin.signed")`
			`DEFAULT_BOOTSTUB_FN = os.path.join(BASEDIR, "board", "obj", "bootstub.panda.bin")`

			`BLOCK_SIZE_H7 = 0x400`
			`APP_ADDRESS_H7 = 0x8020000`
Dynamic sector erase (#1006) * dynamic sector erase * fix red panda flash Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> 2022-08-03 06:58:56 +02:00			`SECTOR_SIZES_H7 = [0x20000 for _ in range(7)] # there is an 8th sector, but we use that for the provisioning chunk, so don't program over that!`
add few mcu config consts, add exports (#704) 2021-08-03 18:26:33 -07:00			`DEVICE_SERIAL_NUMBER_ADDR_H7 = 0x080FFFC0`
Support for STM32H7 and Red Panda (#694) * H7 drivers * Include H7 into the code * fix flash write for H7 * get serial from flasher.h from F4 and H7 * flash.sh and recover.sh for gen3 * add set_data_speed for BRS CAN FD * build all fws * gen3 to panda lib * gen3 name in scons project * disable fd can and brs * gen3 to CI tests * jenkins fix for new tests and build_all * fix pedal test * pedal in panda tests again... * cleanup llfdcan.h * cleanup clock.h * Add LDORDY bit check instead of delay * missing define in stm32h735xx.h lib * board_id helper * enable debug detection again * clean gpio inits * fix board_id helper, make cleaner * comment MCUs in stm lib for faster misra * target MCU * misra-5.5 * improve headers and misra speed * cleanup CI tests * change naming from gen3 to h7 * readable if statement * cleanup llusb.h * only cycle one transceifer in bus-off * move unused funcs to common header * bus_off_err reset * misra 10.4 fdcan * extern to can_data_speed variable * limit can_data_speed array size to 3 * reinit fd can on data speed change * Improve test with ELM327 and extaddr check * bugfix for fdcan * panda python config naming * abstracted init request in llfdcan * misra fdcan * Improve llusb.h for H7 2021-08-02 20:26:15 -07:00			`DEFAULT_H7_FW_FN = os.path.join(BASEDIR, "board", "obj", "panda_h7.bin.signed")`
			`DEFAULT_H7_BOOTSTUB_FN = os.path.join(BASEDIR, "board", "obj", "bootstub.panda_h7.bin")`