* Add preglobal Forester and Outback
* Tests and values cleanup
* Update units in carstate
* Remove ()
* Add OUTBACK_PREGLOBAL_2018 to non_tested_cars
* Add replay route for OUTBACK_PREGLOBAL_2018
* Car port Genesis G70
* Car port G70
* rebase
* update G70 car port
* Update README.md
* no space
* rebase mistake
* Update values.py
* Update values.py
* Update values.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Add support for Subaru Legacy 2015-18
* syntax fix
* Add Legacy 2018 FPv1
* Add Subaru Ascent from upstream
* Use GLOBAL_CAR and LEGACY_CAR lists
* Change LEGACY_2015 to LEGACY_PREGLOBAL
* Add LEGACY_CAR to carstate
* Change LEGACY_2015 to LEGACY_PREGLOBAL in test_car_models
* Add missing SafetyModel to Ascent
* Use GLOBAL_CAR and LEGACY_CAR to set safetyModel
* Change LEGACY_CAR to PREGLOBAL_CARS, remove GLOBAL_CAR
* Fix PREGLOBAL_CARS in carstate and subarucan
* Minor cleanups
* Add accelCruise button event
* Change Preglobal Driver Torque limit to match Global
* Match comments to upstream
* Use Steer_Warning and Steer_Error_1 only for Global
* Change mph units to match upstream values
* Increase Preglobal brakePressed threshold to 2
* Add DashcamOnly to LEGACY_PREGLOBAL
* Fix typo in variable name
* Update README, add create_preglobal_steering_control
* cleanup carcontroller
* cleanup values
* missed that one
* Update STEER_STEP
* Update STEER_MAX
* Add preglobal signal frequency checks
* remove PREGLOBAL_CARS from subarucan
* Remove whitespace
* Use common frequency checks
* cleanup carstate
* cleanup subarucan
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Add initial Forester 2019 support
* Add dgranger15 Forester 2019 FPv1
* fingerprint syntax fix
* FPv1 syntax fix 2
* Add Forester 2019 to CAR
* fix indent
* Add Forester 2019 to test_car_models ignore list
* Update Forester 2019 steering tuning (dgranger15)
* Add Forester 2019 to README.md
* Change lists to single value
* Add test route for Forester 2019
* Remove model year
* Remove Forester model year in test_car_models
* Remove usernames, add Forester ACC speed mph unit value
* Added Rogue 2019/Leaf 2019 fingerprints
* Added Rogue as new car. Updated readme
* Added route to test_car_models.py. Fixed if statements to check against rogue/x-trail
* Fixed paste error
* Merged Leaf fingerprints
* Assume Rogue is MPH until we work out the mph/kph bit
* Mazda Port
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update checksum to account for steer angle signal used in some cars
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Add test drive/segment ID to pass CI tests
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Process gear and brake signals, add new fingerprints
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor some car interface code
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop redundant call, use Ecu, move warning to carstate, fix cruise speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop unused variables, cleanup handsoff tracking
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update to steerError and steeringRate
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor parse gear, update lkas signals from the new dbc
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Better tracking of engage and warning events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* remove commented lines, update speed_kph to match panda
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Steer Error
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Set lkas enable speed to 52 kph
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop block signal use, fix LGTM alerts
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* When gas is pressed OP will disengage, sync local state with it
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Use car's speed signal instead of wheel speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Tidy up disengage events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Rebase/Refactor with upstream
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Sync stock ACC state with OP
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* mazda dbc file renamed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Improve acc stock and go by removing the 3 seconds limit
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Dashcam
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* PR Feedback
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Send ACC cancel only if we are sure cruise is enabled
Otherwise we run the risk of disabling main cruise
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* updated route
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* no process replay for now
* add to release files
* Revert "updated route"
This reverts commit 233db4f1bc2d8eefaa86488be4f6f88360d20793.
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* add sonata interface
update values.py
update values.py
* change sonata_1 to sonata_2019
* add sonata 2019 and forte 2019 to README
prettier fucked me up pretty hard at first
sdfsd
* update README.md
* mock test
* hyundai fw query
* Change query
* this works
* That is not engine
* hyundai fw query
* Change query
* this works
* That is not engine
* Skip FW query in test_car_models
* Those routes don't fingerprint properly after speedup
* only send toyota queries to subaddresses
Co-authored-by: openpilot laptop <laptop@comma.ai>
* exclude HIGHLANDERH_TSS2
* add HIGHLANDERH_TSS2 support
* Add HIGHLANDERH_TSS2 Support
* Add HIGHLANDERH_TSS2 Support
* Added to IGNORED_FINGERPRINTS per @pd0wm
* PR - Honda HRV
values.py - incl. Class, FP, FW_VERSIONS, SPEED_FACTOR 1.025
carstate.py - incl. carFingerprint, doorOpen OVERRIDE (signal unknown)
Safety test concludes that removal of drivers seatbelt IMMEDIATELY disengages OP
interface.py - incl. HR-V vehicle parameters, tuning (tested for 100+ miles)
Longitudinal tuning parameters unchanged from CAR.FIT
test_car_models.py - added per request of review process
*5. honda_hrv_touring_2019_can_generated.dbc will be submitted to commaai/opendbc in next PR
Once *5 is approved, will need to update values.py to matching dbc
Thanks, Cowan Moore 330-701-3922
* Honda HRV Door Signal
BO_ 422 SCM_BUTTONS: 8 SCM
SG_ DRIVERS_DOOR_OPEN : 63|1@0+ (1,0) [0|1] "" EON
* Update values.py
* Update test_car_models.py
* hkg
* Cleanup
* Update readme
* more fixes and cleanup
* Old genesis
* Typoe
* Test car models
* Update comment
* Fix brake pressed
* Update release notes
* Fix vEgo
* Add sonata
* Add sonata values
* Temporarily remove doors check. It doesn't work
* Sonata uses crc8
* Fix tests
* Changes for LFA
* Add comment
* Does this improve the hud?
* Proper signal name
* Force the right value
* some ui stuff
* more comments
* Show lane lines on sonata
* cleanup dash
* fix last ui issues
* Fix doors
* update CI
Co-authored-by: Comma Device <device@comma.ai>
* split out leaf and xtrail
* Add brake pedal
* This should work
* Fix test car models + bump panda
* Combined cruise enabled detection in single message
* Proper frequency checks
* Add doors
* Blinkers and doors
* Seatbelt
* Gear
* Add cancel message
* Unify steering pressed
* Remove angle limit
* Add steer saturation alert for angle based control
* Add set speed
* Change wheel speed factor
* Fix offset in set speed
* Timeout on engage for steer saturated
* Put counter back
* try cancel using seatbelt
* Try different cancel message
* Rename cancel signal
* Add LKAS alert
* Add missing fingerprint values
* Update test car models
* Add some comments
* Nissan port
* add x-trail to release notes
* update readme and model
* remove from releases until tested
* Don't test Nissan for now
* Forced dashcam in test_car_models
* add 2019 Honda Insight + fw fp
* add actual fp and add to ignored, but still required for ECU detection
* add Insight dirty route for now
* update README.md, was wrong mph for each
* update test_car_models
* remove dbc extension
