* timing test
* test
* fix
* print
* loop
* clean up
* wider range
* Update selfdrive/car/tests/test_models.py
* Apply suggestions from code review
* run many times
* Update selfdrive/car/tests/test_models.py
* run for many its
* run with unittest and print as list
* Update .github/workflows/selfdrive_tests.yaml
* Update .github/workflows/selfdrive_tests.yaml
* total time is super inconsistent (body)
* Update selfdrive/car/tests/test_models.py
* clean up
* clean up
* clean up
* this works!
* draft
* test suite not as modular
* try something like this
* can do kb, but not too representative
* clean up
* remove kb? it depends on signals
* clean up
* more clean up
* rename
* just measure all CANParsers
* can do all this manually
* but this is way simpler
* comment
* fix mypy
* this is correct too
* 3 seconds instead of 1.5
* check relay malfunction in test_models
* draft
* actual relay malfunction (or ASCM was turned on)
* rav4: not dashcam and op enabled, but we're not sending anything
* clean up
* spaces
* more space
* flip
* better?
* combine
* for
* move up
* move to openpilot
* draft
* support internal urls
* not used
* update seg list
* regen segment list
* regen seg list
* regen
* regen
* regen
* no dirty segments
* regen seg list with no fuzzy or fixed fp
* regen segments with hda2 exception
* regen with added filters
* regen without bad dongle
* regen
* regenerate!
* regenerate, only OP enabled
* regen
* regenerate!
* regenerate!
* stash
* use SegmentName
* new route list
* add temp comment
* remove comment
* let's see if this works
* comment out other tests to speed up
* fix agent
* ?
* hmm
* oh whoops...
* add matrix
* fix
* how many levels do we need?
* fix values
* matrix can't be in parallel
* how about this
* try this
* Revert matrix
Revert "try this"
This reverts commit 8d0d91fd70c467c1fbb4e4e9aed511d15b2a30ef.
Revert "how about this"
This reverts commit a8e4fc53234824e77cbfb1e471277bc033e9dea1.
Revert "matrix can't be in parallel"
This reverts commit daaa6fcc3c75c74cbb90e97c565099a94123994c.
Revert "fix values"
This reverts commit df554b6a3371d124a574eb8d26bc51ef5b5b8fde.
Revert "how many levels do we need?"
This reverts commit 1a17320fa1c5e7220ef60e29981bbb3bb7da16c6.
Revert "fix"
This reverts commit e7eb6e404358fbd2eac3fea1901a8d30ea92d729.
Revert "add matrix"
This reverts commit a1b57e5725417d3c2f639f8edfc0c889b84b6753.
* use pytest instead! (5 jobs is ~150 mins)
* split lines, uncomment
* This Sienna seg has a fault SDSU that stopped forwarding/sending msgs
* picked a route with no PSCMStatus and no panda errors, recent routes are working
* this cadillac was dashcammed (no radar)
* opened an issue for this, it's 'expected' right now
* small clean up
* small clean up
* i don't think that worked
* is this needed?
* add to new PC tests
* cache
* draft
* Revert "draft"
This reverts commit 3b7f740dd4883118747300bc3687074c2d3c2116.
* probably should be function
* draft
* clean up
* add todo
* 600 random segments
* debug
* does this fix pythonpath issues?
fix
* try this
* mount?
* pytest again!
* no need for PYTHONPATH now
* Update Jenkinsfile
* ?
* convention
* clean up
* would be even more complex (have to unset ci which is class level)
* track
* is lfs pulled at all?
* ah no it's not
* draft
* assertrue
* this is way too complicated, even with unittest discover
* works
* test we can send resume button
* nice catches this
* fix
* fixed
* not needed
* draft
* works
* comment out to let catch
* clean up into a function
* clean ups
* final clean up
* no this is final
* bump
* simplify
* simplify
* pass
* bump
* globals don't work inside methods
* space
* draft
* bump opendbc
* still draft
* that's not right
* superset of the changes, 33hz
* cleanup
* this should work
* remove line
* pass it in again
* actually no need to check updated now
* now_nanos
* consistent name
* fix replay
* one line isn't that bad
switch
switch
* fix CarController tests
* Update ref_commit
* panda/SConscript
* think this is right?
* bump panda
* fix test_models
* use a filter
* bump panda to mater
* more aesthetic ordering
* alphabetical :(
* alphabetical :(
* add regen braking field that's just used to add a pedalPressed
* bump
* bump
* Update ref_commit
* we want the standstill check
we want the standstill check
* see what diff is now
* Update ref_commit
* single longitudinal toggle for e2e and disable radar
* write disable radar param
* rename
* better param name
* clean that up
* update refs
* update translations
* not live for experimental
* write it out
* vanish
* Switch to ECMPRDNL2 for GM gear
* Removing manumatic gear #
* values.py almost complete
* Silverado and Bolt EUV val and CP
* GM controller updated
* Cam hrns supp done (in theory)
* cleanup for new cars
* Remove extra constant
* WS, etc cleanup
* removing the unused
* Fix kpBP typo
* Updated docs
* Skip's PIF tune
* Dropped LKA CAN error patch
* Add silverado sigmoid ff
* CAN Err & LKA latch patch
* Remove EPS fault fix (another PR)
* Remove Silverado (another PR)
* clean up some common params
* Remove Escalade FP
Remove Escalade FP
* comment
* Premier is just a trim
Premier is just a trim
Premier is just a trim
* no footnote: new Bolt is like most other cars, older GM were outliers not at the camera
* clean up
clean up
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* remove comments
* try spamming buttons on bus 2
* bump panda
* bumping opendbc w btn rc
* not needed for this port
This reverts commit 6af1f0ba799e075f877d7acc8ca0f117d97da361.
* add button safety
* Send next rc when spamming btns
* forward other signals in message
* missing DriveModeButton
* fill cruiseState.speed
* see if resume works without counter
* try the whole message
* send immediately and at 10Hz
* no resume, back to just button signal
* even holding random buttons it cancels
* Use torque controller with base tune
* stock long GM don't auto-resume yet
* Testing GM zero min steer speed
* Revert latcontrol
* revert opendbc
* latActive is basically lkas_enabled
* Update Bolt torque params
* comment
* clean up
* Add to releases
* Add test route
* Don't specify segment
* bump panda
* bump panda
* no harness for Bolt just yet
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* We support all and 2023
* move safetyParam up to first cam check
* Bump panda and update docs
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* run test_models on route
* clean up a bit
clean up a bit
clean up a bit
* remove
remove
* make route positional
* fixes from merge
* not working as I expected
* finally working, easiest way seems to make a new subclass dynamically
* bring back routes
* remove comments
* revert skiptest
* fix subclass name
* car first
* this should be here...
* this should work
* comment
* pytest doesn't support dynamically loading with load_tests
* minimize test_models.py diff, and make new file for running on a route
* fix static analysis
* remove print
* clean up a tiny bit
* rename and make required
* auto detect car fingerprint if not given
* move to location that makes more sense
* Add ci argument for running route from routes.py
* check standstill against panda
* use XMISSION_SPEED for all, and compare to 0
* fix
* only check for Honda for now
* update comment
* update refs
* update refs and update check
* phantom commit
