* prevent bolt fault
* comment
* only for camera ACC
* fixup alert
* bump cereal to master
* use new name
* Update selfdrive/car/gm/interface.py
* Update selfdrive/car/gm/interface.py
* Update selfdrive/car/gm/interface.py
* only care about prevent engagement when we look at PCM
* Add explicit cost on steering wheel movement
* Laxer low speed control
* Laxer low speed control
* Lower min speed now there is a cost
* 3m/s
* Similar to old master
* Add cost
* Crazy high
* Update ref
* comment
* -4 didn't make any sense?
* comments
* comments
* update to 400
* bump panda
* remove unused iso limit vars
* update comments
* bump panda
* Update selfdrive/car/gm/values.py
* Update ref_commit
* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* lateral overriding is overriding
* Update test
* remove
* also could do something like this and only have one OVERRIDE ET
* Revert "also could do something like this and only have one OVERRIDE ET"
This reverts commit 5c381641c08961676a56a9718fbdaa84989ac249.
* full names
* bump cereal
* test every event type
* update refs
* Add params for lead and danger
* fix long params
* E2e passes simple maneuver tests
* Make tests run with e2e long mode
* Slightly more error allowed in e2e mode
* FCW back and populate long source field
* Fix planner name
* FCW still doesnt work
* Slightly less aggressive
* Doesn't need to simulate from stop
* refactor
* Add planer modes to support offline, acc, and blended
* add acceleration
* Fix index
* Update model ref
* Read in model outputs
* Add model msg
* Add e2e logic
* Add source
* see if this works at all
* can revert this
* think adding a no entry conditionally is nicer
* then we can revert this
* 0 makes more sense
* Revert "0 makes more sense"
This reverts commit efc89e8a2389ef58fbc0cec0a2872d24db524867.
* gm CC uses > 70
* bump cereal
* comment
* test on Honda
* whoops
* works
* add exception with todo
* moved button enable events to controlsd
* get rid of that
get rid of that
* different values for now
* car interfaces add enable event, controlsd can block it
* Regen and update refs
* delete if not set
* One place
one place
* regen routes are uninitialized first few frames
* Trim start of segment so it's like original segment
* stash
* regen
* not working
* clean up
* more cleanup
* revert
* bump ceral
* actually check resume button
* whoops
* pcmCruise cars don't use setSpeed, so we're good
* engage correctly in sim
* Update ref_commit
* Update refs
* Don't set lane change events if we're not able to steer.
* more specific variable name
* update process replay socket config
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* update names + notes for MPC outputs
"current_curvature" is not the correct description of what the MPC is outputting in it's curvature_ego state.
The MPC is integrating it's free variable, curvature_rate, such that curvature[0] is actually the desired_curvature before any delay.
inversely: the curvature_rate_desired is the desired rate of change to the setpoint and not the actual curvature rate.
If we were to set the initial curvature = measured curvature in the MPC initiation these names would be correct.
This was possibly how it was initially set up but the nomenclature here is now confusing.
* more notes
* match
* Clarify #1
* Set good torque using torque controller tuning
* should be equal to
* save lateral accel to car params
* use maxLateralAccel
* always
* same convention
* nan will always evaluate to false
* The great good torque purge
* adjust default friction
* Add data for more cars
* adjust name
* Welcome back, guys. Only adjust good torque if maxLatAccel is set
* Update refs (1.7 is 1.7000001...)
