Commit Graph

523 Commits

Author SHA1 Message Date
Harald Schäfer
a979a54cf9 Calibration remount detector: soft disable (#27993)
* Calibration remount detector: soft disable

* Update test_calibrationd.py
2023-04-22 00:27:20 +00:00
Vivek Aithal
15b880c0ea Bolt EUV: Non-linear torque function (#27696)
* add erf based ff

* silly bug; diff of nonlinear != nonlinear of diff

* add sigmoid based ff, ensure slope at 0 > 1

* reduce steer down limit and increase driver allowance

* rebase panda

* atry without friction, and with tanh nonlinear

* finalize the nonlinear function

* do not disable friction compensation in the ff

* bump panda

* bump panda

* update refs

* update refs

* resolve comments

* Add type hints

---------

Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
2023-03-29 15:10:39 -07:00
Jason Young
267974e002 remove accFaultedTemp, add steerTimeLimit (#27720)
* remove accFaultedTemp

* retry CI

* bump cereal

* grab the new steerTimeLimit Event

* bump cereal to updated master
2023-03-28 16:04:14 -07:00
Shane Smiskol
3ab8645d3a uiPlan: add planned acceleration field (#27484)
* add accel

* bump cereal

* Update ref_commit

---------

Co-authored-by: Bruce Wayne <harald.the.engineer@gmail.com>
2023-03-02 20:11:24 -08:00
Adeeb Shihadeh
7a3b3e8b56 better main off alert (#27442) 2023-02-23 15:01:10 -08:00
Adeeb Shihadeh
2008332bd4 GM: revert custom Bolt torque tune (#27403)
* Revert "GM: cleanup torque feedforward function (#27347)"

This reverts commit 8c099dd4e5.

* Revert "Chevrolet Bolt: Non-linear torque tune (#27344)"

This reverts commit e49748d571.

* update refs
2023-02-21 15:27:48 -08:00
Adeeb Shihadeh
ea419c5764 add 'remount device' to permanent calibration invalid alert (#27407) 2023-02-20 16:29:17 -08:00
Harald Schäfer
eb8bdc0026 MPC path in UI (#27380)
* 10s lat

* Full length MPC

* redfine N

* Leave controls the same for now

* Updates

* use long plan in lat plan

* interp plan

* simplergit add selfdrive/controls/plannerd.py selfdrive/controls/

* expand to 10s

* revert this

* fix linter

* vizualize

* fix long test

* typo

* cleanup

* compiles

* unused

* unused

* bump cereal

* bump cereal

* use model if no uiplanm

* update replay

* update ref commit

* bump cereal to master
2023-02-17 19:58:30 -08:00
Harald Schäfer
04fe6c4ec7 Expand lateral MPC to 10s (#27343)
* 10s lat

* Full length MPC

* redfine N

* Leave controls the same for now

* Updates

* use long plan in lat plan

* interp plan

* add new interp

* simplergit add selfdrive/controls/plannerd.py selfdrive/controls/

* expand to 10s

* revert this

* fix linter

* Update sconscripts

* fix test

* fix test

* fix test

* Revert "Update sconscripts"

This reverts commit 6e23c69dcebd5ed003e37e01921f6af7c31de0db.

* Dont import drive helpers

* better compile deps

* fix compile

* comment

* update replay

* Update plannerd time
2023-02-17 15:28:26 -08:00
Vivek Aithal
e49748d571 Chevrolet Bolt: Non-linear torque tune (#27344)
* add non linear tune

* update refs

* rerun tests
2023-02-14 16:20:28 -08:00
Adeeb Shihadeh
5af5f02ba8 better min enable speed alert (#27317) 2023-02-14 13:29:23 -08:00
Shane Smiskol
4f2134468f events: reword ESP off alert (#27304)
* Rename event

* rename to Control

* rename to disabled
2023-02-10 23:46:48 -08:00
Adeeb Shihadeh
5ab2d35f7b controlsd: higher default set speed in experimental mode (#27279)
* controlsd: higher default set speed in experimental mode

* update tests

* update tests
2023-02-09 19:27:51 -08:00
Shane Smiskol
b00bc4f57e Car interface: require fingerprint and FW versions to get params (#26932)
* require fingerprint and FW versions

* add get_non_essential_params()

* comment

* all required

* classmethod, need to allow subclasses to override _get_params

* fix that

* fix

* fix

* wrong fix 🤦
2023-01-12 12:25:24 -08:00
Adeeb Shihadeh
f14deae475 Revert "Car interface: require fingerprint and FW versions to get params (#26766)"
This reverts commit b68dabb689.
2023-01-12 11:28:04 -08:00
Shane Smiskol
b68dabb689 Car interface: require fingerprint and FW versions to get params (#26766)
* require fingerprint and FW versions

* add get_non_essential_params()

* comment

* all required

* classmethod, need to allow subclasses to override _get_params

* fix that

* fix
2023-01-11 23:44:50 -08:00
Jason Young
cb88b3ed65 controlsd: set latActive with max minimum steer speed (#26805)
* refactor minimum lateral speed handling

* rename for clarity

* simplify without joystick at standstill

* intermediate standstill variable, check notCar

* check joystick for now

* cmt

Co-authored-by: Shane Smiskol <shane@smiskol.com>
2023-01-10 20:51:10 -08:00
Shane Smiskol
b45dda2d0a Longitudinal tests: test forceDecel (#26765)
* test with forceDecel

* test all combos

* fix

* fix

* fix

* ...

* remove print

* clean up

* just set cruise to 0

* update ref commit

Co-authored-by: Bruce Wayne <harald.the.engineer@gmail.com>
2023-01-10 14:46:43 -08:00
Shane Smiskol
4e9bddee5c longcontrol: enter stopping state immediately (#26879)
* enter stopping state immediately

* Update selfdrive/controls/lib/longcontrol.py
2023-01-10 13:02:43 -08:00
Adeeb Shihadeh
cd8e03d53e move all third party stuff into third_party/ (#26853)
* mv fastcluster

* move msm_kgsl.h

* camerad include

* update path

* mv pyextra

* fix tici build

* add acados_template to release build

Co-authored-by: Comma Device <device@comma.ai>
2022-12-31 21:00:50 -08:00
Shane Smiskol
9e9600a4f4 Events: actionable accFaulted alert text (#26783)
same alert text as steer and brake unavailable
2022-12-13 00:16:36 -08:00
Shane Smiskol
2545dd195e alert: smaller standstill alert (#26751)
smaller standstill alert
2022-12-09 23:30:41 -08:00
Shane Smiskol
84340f07ab LatControlAngle: fix setting saturation check speed (#26752)
set in init function
2022-12-09 23:29:56 -08:00
Shane Smiskol
d5ffb90a04 LatControlAngle: lower saturation check speed (#26749)
lower speed for angle
2022-12-09 21:43:55 -08:00
Shane Smiskol
c1b3d696bc controlsd: set steer_limited for angle cars (#26748)
* Set steer limited for angle cars

* closer to torque threshold
2022-12-09 21:43:27 -08:00
Shane Smiskol
e6fcc2d6aa planner: read experimental mode from controlsState (#26553)
read from controlsState
2022-12-05 13:58:15 -08:00
Shane Smiskol
5409895ab2 Deprecate noTarget event (#26638)
deprecate notarget
2022-11-30 02:32:47 -08:00
Shane Smiskol
dbe512d167 controlsd: preEnable on brake at a standstill (#26273)
* pre-enable on brake at standstill

* test by getting rid of noTarget

* Update events.py

* rename

* stash what we got so far

* cmt

* not sure if best way to fix, but enabled with current states defs is fine

* no noEntry in preEnabled

* bumpcereal

* uncomment

* Update ref_commit

Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
2022-11-29 17:34:10 -08:00
Vivek Aithal
3a4f19f0ee [controlsd] Refactor apply_deadzone in Lateral Torque Control (#26626)
rename apply_slack to apply_center_deadzone, remove unused prius offline values
2022-11-29 12:46:08 -08:00
Vivek Aithal
0706b03e8c [controlsd] Toyota Prius 2017 (#26455)
* increase lag on prius

* better offline values computation

* split prius ecu more, set deadzone to 0

* add deadzone back

* replace deadzone with slack

* reduce deadzone to 0.2

* update refs
2022-11-29 10:47:13 -08:00
Shane Smiskol
3253b85900 Toyota: alert when in standstill (#26585)
* add resume required alert

* possibly need this (pressing resume with brake held does nothing)

* better text (has both meanings)

* try this

* Revert "try this"

This reverts commit 5b2991929b62f5bcd9bfa0767d709b5fe83b094b.

* no alert with interceptor

* check long
2022-11-25 16:00:58 -08:00
Shane Smiskol
a19b5b91d2 longcontrol: ignore cruise standstill if interceptor (#26597)
* ignore standstill

* cmt

* standstill

* rm cmt

* flip
2022-11-24 18:17:36 -08:00
Adeeb Shihadeh
65fa87a969 cleanup panda types everywhere (#26574)
* cleanup panda types everywhere

* one more
2022-11-21 23:43:24 -08:00
Shane Smiskol
23a7a987f6 controlsd: add test around cruise speed gas pressed behavior (#26486)
* test

* test

* debug

* test

* test

* test

* clean up

* clean up

* add test

* stash

* clean up

* clean up

* clean up

* assert equal
2022-11-21 17:05:13 -08:00
YassineYousfi
ded66e6307 long_mpc: fix e2e source condition (#26546)
* fix long_mpc source param

* rm print

* add back space for formatting
2022-11-21 15:25:23 -08:00
Shane Smiskol
f15d169289 controlsd cruise speed: fix missing initial value 2022-11-14 11:01:01 -08:00
Shane Smiskol
e46063086f controlsd: no speed increment if enabled on button rising edge (#26490)
* don't increment speed if we enabled on rising edge

* more realistic test
2022-11-13 16:34:26 -08:00
Shane Smiskol
870b798185 controlsd: clean up v_cruise updating (#26479)
* clean up

* clean up

* clean up
2022-11-11 23:56:35 -08:00
Shane Smiskol
d3f971b365 controlsd v_cruise: fix unknown buttons (#26474)
Fix button being None
2022-11-11 20:10:12 -08:00
Shane Smiskol
76ac3d4c99 controlsd: resume does not increment speed while cruise standstill (#25470)
* fix runaway set speed for GM

* fix runaway set speed for GM

* Handle resuming to exit standstill generically

* clean that up

* ugh i want to fix all the formatting

* class that manages v_cruise

* better name

* move around

* add depressed_state

* fine to update on pressed change, better name

* cmt

* we need to check CS. button_change_state only works if we exit standstill on rising edge not falling edge

* no defaultdict
2022-11-11 19:43:30 -08:00
Shane Smiskol
811c096e64 controlsd: add cruise speed helper class (#26472)
* fix runaway set speed for GM

* fix runaway set speed for GM

* Handle resuming to exit standstill generically

* clean that up

* ugh i want to fix all the formatting

* class that manages v_cruise

* better name

* move around

* add depressed_state

* fine to update on pressed change, better name

* revert gm stuff

* revert standstill stuff

* remove

* revert that

* we can put this in here now!

* below update

* actually only used here

* one line
2022-11-11 18:53:48 -08:00
Shane Smiskol
89b88fc7a2 Hyundai: fix button enable controls mismatch (#26471)
* bump panda

* buttonCancel needs to be a noEntry

* bompo

* Update ref_commit
2022-11-11 14:49:38 -08:00
Shane Smiskol
9f80a97eee longitudinal tests: add disabled maneuver (#26470)
* undeclared variable

* run first second disabled

* only test

* test disabled as a new maneuver

* bottom
2022-11-11 14:02:09 -08:00
Shane Smiskol
98206fb92e planner: fix undeclared variable (#26468)
* undeclared variable

* run first second disabled

* revert test

* rev
2022-11-11 13:22:56 -08:00
Harald Schäfer
f23296bc87 Add force decel to e2e long (#26448)
* add force decel to e2e

* Update longitudinal_planner.py
2022-11-11 10:46:03 -05:00
YassineYousfi
7374080668 min lane change speed 20mph (#26434) 2022-11-09 22:04:57 -08:00
Adeeb Shihadeh
9a3f468051 experimental mode (#26416)
* experimental mode

* rename param

* red lights
2022-11-08 14:45:01 -08:00
Harald Schäfer
f63f0de80a E2e long model: calibrate model speed to wheel speed (#26395)
* calibrate!

* Fix test

* Fix proc replay

* check len

* get v_ego from model 8501d20-bb59-4193-aa82-82b2737dedd6/449 609d90f3-65e6-4617-a60c-d6d99eead408/700

* bump cereal

* initialize v_model_error

* typo

* better names

* cleanup

* bump cereal

* update model replay ref commit

* bump to cereal master

Co-authored-by: Yassine Yousfi <yyousfi1@binghamton.edu>
2022-11-07 17:49:36 -08:00
Vivek Aithal
e9eb5d99ff [torqued] Fix high speed oscillations (#26338)
* modify low speed factor during high speeds and rescale friction

* update refs
2022-11-07 17:01:24 -08:00
Harald Schäfer
253e5d7f9d FCW: less false positives (#26366)
* Less FP for FCW

* enable fcw for e2e long
2022-11-06 12:17:07 -08:00